• Journal of Construction Engineering and Project Management
• /
• v.6 no.3
• /
• pp.14-21
• /
• 2016

One of the major issues in the material-based or acceptance quality characteristics asphalt pavement Quality Assurance (QA) is that the method does not have rationality to link between the individual materials and the projected performance of the pavement. A new asphalt mix QA method has been recently developed under a national research project using the probabilistic Performance Related Specification (PRS). This advanced PRS QA methodology integrates the AASHTOWare Pavement ME Design$^{(R)}$ technology with the simple performance test concept that bridges the material characteristics with the pavement performance. This paper presents a case study of asphalt pavement performance using the developed PRS QA computer program, named Quality Related Specification Software (QRSS), with an actual pavement project, to demonstrate the developed PRS procedure and to assess the robustness of QRSS in terms of the rationality of the distress predictions. The results of this limited case study show that the new PRS QA method reasonably predicts the pavement performance, properly applied the probabilistic methods, and produced rational pay adjustment.

• Journal of the military operations research society of Korea
• /
• v.22 no.2
• /
• pp.90-112
• /
• 1996

Research issues in software engineering in recent may be object oriented methodology and software quality. Since Halstead has proposed metric-software science in 1977, software quality area has been studied in steady but inactively until 1980s. As international standards such as ISO 9000-3, 9126 were enacted in 1990s early, interest in software quality is increased but many problems such as how to validate metric, measure quality or apply metric are remained. This paper proposes software quality metric methodology which software developer or project manager can use in measuring quality and validating metric during software development. The methodology is classified by several phases: establishment of quality requirement, identification of quality metric, data collection, metric implementation, metric validation. In order to show its applicability, test program, metrics and data are applied to each phase of the methodology. Consideration of this methodology as a methodology for software quality measurement similar to development methodology for software development is needed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.663-670
• /
• 2022

This study presents the method for integrating the software assets acquired before the weapon system software reliability test was not formed in the weapon system software development and management manual through JTDLS Batch II case. This paper describes the problems for applying manual's direction to JTDLS Batch II project, and decisions and expected effects.

• The Journal of Information Systems
• /
• v.10 no.1
• /
• pp.97-126
• /
• 2001

Object-orientation has been proposed as a promising software process innovation to improve software productivity and quality. It has not been understood clearly, however, what factors influences the diffusion of object-oriented technology in organizations. A research model was formulated and hypotheses were generated based on the literature of information technology implementation and software process innovation. To test the research hypotheses, a questionnaire survey was conducted. The results based on 121 responses from Korean companies revealed that project characteristics, use of external experts, and number of development projects are significantly related to the diffusion of object-oriented analysis and design and object-oriented programming. Innovation champion is positively related to the diffusion of object-oriented analysis and design, whereas it is not related to the diffusion of object-oriented programming language. Only project complexity was significantly related to the diffusion of visual programming language. On the other hand, organizational size was not significantly related to any object-oriented technology in this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1125-1132
• /
• 2023

The importance of networks is gradually expanding in the battlefield environment. As time goes by, the types of tactical data links used in the Korean JTDLS are increasing, and the military's weapon systems equipped with tactical data link systems are increasing. Thorough quality verification is required to provide stable software to the wider battlefield. This study examines how to prepare an environment in which various simulation tests to verify the stability of the Korean JTDLS project can be conducted as diverse as possible using minimal physical space and Hardware resources. Through this, it is possible to improve the completeness of the project and secure the stability of the program, and it is intended to contribute to securing higher stability and reliability by securing maximum test capabilities in a limited test environment even in Linux based system project of a similar environment.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.10-15
• /
• 2014

This study presents technical description of the operating program development that operates the test bench for functional test of EECU. The test bench is capable of testing, simulation and adjustment of the EECU software using the operating program. The test bench is for the Development Project of the EECU platform for FADEC system. The operating program is consists of 3 modules which are the test bench operating module, cockpit simulator module and SILS module. The operating module mainly carries out the EECU test with manual operation and operating scenarios. Also that record and process the test data. The cockpit simulator module is capable of implementation of virtual cockpit control input and engine status display. The SILS module can simulate engine and EECU operation in software environment.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

• Archives of design research
• /
• v.17 no.3
• /
• pp.147-156
• /
• 2004

Currently, usability tests for web sites with representative users are conducted in laboratory environment that disturbs subjects' natural behavior. These test methods are inefficient for tests that require large number of subjects, because experimenters and subjects should be located in the same place at the same time during the test. In this study, a remote usability test tool, called 'RIO' has been developed to cope with these laboratory-based experiment problems - the 'synchronism' and the 'unnatural environment'. The tool is separated into three parts: 'Project Manager', 'Remote Interaction Observer', and 'Interaction Analyzer'. 'Project Manager' sets up overall experimental parameters and actual tasks to be peformed by subjects. 'Remote Interaction Observer', endued with Microsoft Internet Explorer Control, is a modified Web Browser which records user interactions, screen images and elaborate browser events while subject performs given tasks. This module is distributed to subjects as an installable software package. When they finish all the tasks, the captured interaction data is compressed and sent to 'Interaction Data Server' automatically. 'Interaction Analyzer' visualizes interaction data from the 'Interaction Data Server'. It also generates project-scope statistics which facilitate discovering peculiar cases among interaction submissions.

• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.753-762
• /
• 2015

As the computer graphic technology has developed rapidly, the management of visual effects production has also changed. However, the insufficient rest and the inefficiency of communication have resulted in more pressure which would weaken the strength of the whole team. For searching the possible solution, this research has applied the SCRUM in VFX production and analyzed the impact of SCRUM for VFX project management. SCRUM was first used in the projects of software development, but now there are already many successful examples of introducing SCRUM into their facilities in various fields. This paper has used SCRUM in the experimental group and present methodology in VFX project management in the control group for the same project. Based on the analysis of the questionnaire investigation from both group with using t-test for data analysis, it has confirmed the credibility of the questions in the questionnaire index as α > 0.72. With the result of analysis based on the corresponding samples of the t-test, it shows the diversity of SCRUM for project management, and the convenience of communication within the team can enhance the team strength. Follow-up research will attend to provide more suggestions for applying SCRUM in other areas in project management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.887-901
• /
• 2002

Software management model divided into the software project model and design estimation model, software matrices model, reliability growth model, process improvement model(or process maturity model) etc. Among these software management models, software complexity model make an estimated of the product software. For a practice of software managed, need to guideline of the static analysis of software. Especially, Software complexity model introduced for the estimation of software quantity and program complexity. In case of measurement the software matrices, its need for us to analysis of software quality and products. On the other hand, we known that complexity program include many defects and consuming of source cost. So, we apply to complexity model using of the program complexity, control structure and volume matrices, interface metrics, process complexity metrics method. In this paper, we represent that the analysis of fault data detected during the system test. Also, we analysis of program control structure and interface, volume matrices in various aspect of switching software. Others, their results utilized similar of project and system development.