• Genomics & Informatics
• /
• 제16권4호
• /
• pp.34.1-34.9
• /
• 2018

Cirsium japonicum belongs to the Asteraceae or Compositae family and is a medicinal plant in Asia that has a variety of effects, including tumour inhibition, improved immunity with flavones, and antidiabetic and hepatoprotective effects. Silymarin is synthesized by 4-coumaroyl-CoA via both the flavonoid and phenylpropanoid pathways to produce the immediate precursors taxifolin and coniferyl alcohol. Then, the oxidative radicalization of taxifolin and coniferyl alcohol produces silymarin. We identified the expression of genes related to the synthesis of silymarin in C. japonicum in three different tissues, namely, flowers, leaves, and roots, through RNA sequencing. We obtained 51,133 unigenes from transcriptome sequencing by de novo assembly using Trinity v2.1.1, TransDecoder v2.0.1, and CD-HIT v4.6 software. The differentially expressed gene analysis revealed that the expression of genes related to the flavonoid pathway was higher in the flowers, whereas the phenylpropanoid pathway was more highly expressed in the roots. In this study, we established a global transcriptome dataset for C. japonicum. The data shall not only be useful to focus more deeply on the genes related to product medicinal metabolite including flavolignan but also to study the functional genomics for genetic engineering of C. japonicum.

• 한국인터넷방송통신학회논문지
• /
• 제19권2호
• /
• pp.169-174
• /
• 2019

본 논문은 스마트팜 ICT기기의 고장 오작동으로 인한 이상을 탐지하여 사용자에게 알리는 시스템을 제안한다. 4차 산업혁명이 다가오면서 농업도 경쟁력 향상을 위해 ICT기술과 융합하고 있다. 매년마다 스마트 농업 시장 규모는 빠르게 성장하고 있지만 아직까지 기기의 표준화와 인증제도가 부족한 실정이다. 특히 국내에서 보급되고 있는 스마트팜 기기는 업체마다 제품 규격이 상이하고 소프트웨어와 하드웨어가 별도로 개발되고 있는 등 품질과 호환성이 떨어져 저가의 스마트 팜 기기를 사용하는 농가의 피해가 빈번하게 발생하여 기기의 이상을 인지할 수 있는 시스템이 필요한 상황이다. 본 논문에서는 스마트팜 국내외 정책 동향과 국내 스마트 농업 동향을 알아보고 스마트팜 고장 오작동에 의한 이상 상황을 분석하여 사전에 예방하고 문제 상황이 발생할 경우 사용자에게 알리는 시스템을 제안한다.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1377-1384
• /
• 2018

Accurate measurement of the absorbed dose and the effective dose is required in dental panoramic radiography involving relatively low energy with a rotational X-ray tube system using long exposures. To determine the effectiveness of measuring the irradiation by using passive dosimetry, we compared the entrance skin doses by using a radiophotoluminescent glass dosimeter (RPL) and an optically stimulated luminescence detector (OSL) in a phantom model consisting of nine and 31 transverse sections. The parameters of the panoramic device were set to 80 kV, 4 mA, and 12 s in the standard program mode. The X-ray spectrum was applied in the same manner as the panoramic dose by using the SpekCalc Software. The results indicated a mass attenuation coefficient of $0.008226cm^2/g$, and an effective energy of 34 keV. The equivalent dose between the RPL and the OSL was calculated based on a product of the absorbed doses. The density of the aluminum attenuators was $2.699g/cm^3$. During the panoramic examination, tissue absorption doses with regard to the RPL were a surface dose of $75.33{\mu}Gy$ and a depth dose of $71.77{\mu}Gy$, those with regard to the OSL were surface dose of $9.2{\mu}Gy$ a depth dose of $70.39{\mu}Gy$ and a mean dose of $74.79{\mu}Gy$. The effective dose based on the International Commission on Radiological Protection Publication 103 tissue weighting factor for the RPL were $0.742{\mu}Sv$, $8.9{\mu}Sv$, $2.96{\mu}Sv$ and those for the OSL were $0.754{\mu}Sv$, $9.05{\mu}Sv$, and $3.018{\mu}Sv$ in the parotid and sublingual glands, orbit, and thyroid gland, respectively. The RPL was more effective than the OSL for measuring the absorbed radiation dose in low-energy systems with a rotational X-ray tube.

• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.102-114
• /
• 2021

NDF (No Defect Found) is a phenomenon in which defects have been found in the manufacturing, operation and use of a product or facility, but phenomenon of defects is not reproduced in the subsequent investigation system or the cause of the defects cannot be identified. Recently, with the development of the fourth industrial revolution, convergence of hardware and software technologies in various fields is spreading to products such as aircraft, home appliances, and mobile devices, and the number of parts is increasing due to functional convergence. The application of such convergence technologies and the increase in the number of parts are major factors that lead to an increase in NDF phenomena. NDF phenomena have a significant negative impact on cost, reliability, and reliability for both manufacturers, service providers and operators. On the other hand, due to the nature of NDF phenomena such as difficult and intermittent cause identification and ambiguity in judgment, it is common to underestimate the cost of NDF or fail to take appropriate countermeasures in corporate management. Therefore, in this paper, we propose a methodology for estimating NDF costs by the PAF model which is a quality cost analysis model and ABC (Activity Based Costing) technique. The methodology of this study suggests a detailed procedure and the concept to accurately estimate the NDF costs, using ABC analysis, accounting system information, and IT system data. In addition case studies have validated the methodology. We think this could be a valid methodology to refer to when estimating the cost of other parts. And, it is meaningful to provide important judgment information in the decision-making process based on quality management and ultimately reduce NDF costs by visualizing them separately by major variable factors.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.321-325
• /
• 2020

Purpose: This study is to evaluate the accuracy of gypsum replica models made from various gypsum products. Methods: One main model was made of stainless steel by CNC milling process. Molds were formed from the main model, and the gypsum replica models were made using 8 types of type IV gypsum, 10 pieces each. The main model was digitized by a contact scanner (Incise; Renishaw) and the gypsum replicas were digitized by an optical scanner (E4; 3Shape A/S). The difference between the main model and the gypsum replicas were measured by inspection software (3D Systems). One-way ANOVA was performed to evaluate the statistical significance of differences between groups. In addition, the independent sample T test was performed to determine the difference between the conventional and scannable stone group (n=10, α=0.05). Results: The root mean square of the stone models were 7.24 ㎛ to 10.78 ㎛, and statistical significance was found between the two groups (SR, FR) and the other 6 groups (IS, SG, CA, CS, ER, EBG) (p<0.05). The accuracy of the gypsum replicas was 9.04 ㎛ and 7.62 ㎛ in the conventional and scannable stone group, respectively. There was statistical significance between the two groups (p<0.01). Conclusion: In the limited results of this study, the product with low setting expansion and the scannable showed high accuracy. Therefore, in order to obtain a stable and accurate scan model, it is more effective in terms of accuracy to use a scannable stone with a low setting expansion.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.60-70
• /
• 2021

Recently, with the development of technologies for the fourth industrial revolution, convergence and complex technology are being applied to aircraft, electronic home appliances and mobile devices, and the number of parts used is increasing. Increasing the number of parts and the application of convergence technologies such as HW (hardware) and SW (software) are increasing the No Defect Found (NDF) phenomenon in which the defect is not reproduced or the cause of the defect cannot be identified in the subsequent investigation systems after the discovery of the defect in the product. The NDF phenomenon is a major problem when dealing with complex technical systems, and its consequences may be manifested in decreased safety and dependability and increased life cycle costs. Until now, NDF-related prior studies have been mainly focused on the NDF cost estimation, the cause and impact analysis of NDF in qualitative terms. And there have been no specific methodologies or examples of a working-level perspective to reduce NDF. The purpose of this study is to present a practical methodology for reducing NDF phenomena through data mining methods using quantitative data accumulated in the enterprise. In this study, we performed a cluster analysis using market defects and design-related variables of mobile devices. And then, by analyzing the characteristics of groups with high NDF ratios, we presented improvement directions in terms of design and after service policies. This is significant in solving NDF problems from a practical perspective in the company.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.841-848
• /
• 2021

본 연구의 목적은 스마트폰을 사용하는 사용자들이 의사결정에 어떤 요소를 통해 영향을 미치는지 탐구하는 것이었다. 본 연구는 친밀감/개인 연결성, 사용/의존성, 친숙함/전문성, 효능/효과, 자아정체성, 제어 등을 독립변수로 설정하고 의사결정은 종속 변수로 설정하였다. 본 연구에서는 스마트폰 사용자 200명을 설문지를 통해 수집·분석하였으며, 변수 간 영향을 파악하기 위해 WarpPLS를 사용하였다. 이 연구는 사용자의 심리적인 의사결정이 스마트 기기에 어떤 요인으로 영향을 미치며, 이를 통해 미래 산업의 발전과 스마트 기기를 사용하는 사용자들의 특성과 수용성을 파악할 수 있다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제10권6호
• /
• pp.211-222
• /
• 2021

최근에 시판 되고 있는 냉동·냉장 가전제품은 사물인터넷(IoT) 기능이 추가된 제품이 출시되고 있으나, IoT 기능에 대한 시험은 거의 없는 실정이다. 특히 기존의 시험체제에서는 IoT 기반의 냉동·냉장 가전제품에 대해 IoT 시험항목이 마련되어 있지 않아 제품을 제조하는 업체의 경우에는 결함이 발생하더라도 원인을 쉽게 찾기가 어려우며, 시험기관의 경우에도 IoT와 관련한 시험항목 선정 및 방법의 부재로 올바른 성능시험 수행에 제약이 있다. 본 논문에서는 가전기기 분야의 제품 중 IoT 기능이 포함된 냉동·냉장 제품의 성능시험 프로세스에서 제품 결함을 찾아내고 그 원인을 식별할 수 있는 시험항목 프레임워크를 설계하고, 이를 이용한 시험방법 및 관리방안을 제안한다. 제안하는 연구를 통해 제조사 및 시험기관은 IoT 기반의 냉동·냉장 제품의 올바른 성능시험이 가능하여, 제품의 완성도를 높이고 신뢰성을 확보할 수 있다.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.

• 한국포장학회지
• /
• 제27권3호
• /
• pp.175-180
• /
• 2021

Although it has recently been regulated for use as an eco-friendly policy in Korea, the use of EPS (Expanded Polystyrene) cooling boxes, which are used as cold chain delivery insulation boxes for fresh agricultural and livestock products, is also increasing rapidly as e-commerce logistics such as delivery have increased rapidly due to COVID-19. Studies were conducted to optimize the EPS cooling container through internal air heat flow of CFD (Computational Fluid Dynamics) analysis and FEM (Finite Element Method) random vibration analysis using domestic PSD (Power Spectral Density) profile of the EPS cooling box to which the refrigerant is applied in this study. In the analysis of the internal air heat flow by the refrigerant in the EPS cooling box, the application of vertical protrusions inside was excellent in volume heat flow and internal air temperature distribution. In addition, as a result of random vibration analysis, the internal vertical protrusion gives the rigid effect of the cooling box, so that displacement and stress generation due to vibration during transport are smaller than that of a general cooling container without protrusion. By utilizing the resonance point (frequency) of the EPS cooling box derived by the Model analysis of ANSYS Software, it can be applied to the insulation and cushion packaging design of the EPS product line, which is widely used as insulation and cushion materials.