• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.218-230
• /
• 1993

A power line modem(PLM) which transfers data safely through power lines in houses or small offices is considered. When a power line is used for communications, transmitted signals could be affected by the channel characteristics such as frequency-selective fading, interference, and time-varying attenuation. In order to overcome these impairments, a direct sequence(DS) technique which is well known as an effective instrument against a variety of interferences and hostile channel properties is employed. Using a DS technique, however, requires more circuits such as PN code generator circuits, code modification circuits, and complicated synchronization circuits, and it also results in substantial acquisition delay. In this paper, some of these circuits are implemented via software programmed in the system controller, and the complicated synchronization circuits are replaced by simple circuits utilizing a 60 Hz power signal for synchronization. The synchronization ciruits used in this paper virtually eliminate the substantial acquisition delay, and is also designed to free influence of 60 Hz zero crossing jitters which reside in a power signal. As a result, a PLM using a DS technique is realized in the form of wall-socket plug, and the PLM hardware would be very much simplified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.122-127
• /
• 2022

Currently, the drone is considered as a mobile base station of USN as a method to act as a base station using USN in existing LTE-M and LTE networks for data transmission in unmanned ships. Therefore, the drone, which is a mobile base station, is a sink node equipped with an LTE modem or a short-range communication modem, and can collect safety information of ship operation from the sensor node and transmit the safety information to the ship or transmit the information between the ships. As, if a short-range network is formed by using drones, it will form a communication network around unmanned ships and will be advantageous for collecting information using security and environmental sensors. In this paper, we propose a method to transmit environmental sensor data and to utilize communication between ships using drones to secure the surrounding information necessary for AI operation of unmanned ships in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1172-1176
• /
• 2008

In this paper, we describe the implementation and performance of a dual-mode Software Define Radio (SDR) smart antenna base station system. SDR technology enables a communication system to be reconfigured through software downloads to the flexible hardware platform that is implemented using programmable devices such as Digital Signal Processors (DSPs), Field Programmable Gate Arrays (FPGAs), and microprocessors. The presented base station channel card comprises the physical layer (pHY) including the baseband modem as well as the beamforming module. This channel card is designed to support TDD High-Speed Downlink Packet Access (HSDPA) as well as Wireless Broadband Portable Internet (WiBro) utilizing the SDR technology. We first describe the operations and functions required in WiBro and TDD HSDPA. Then, we explain the channel card design procedure and hardware implementation. Finally, we evaluate WiBro and TDD HSDPA performance by simulation and actual channel-card-based processing. Our smart antenna base-station dual-mode channel card shows flexibility and tremendous performance gains in terms of communication capacity and cell coverage.

• Journal of KIISE:Software and Applications
• /
• v.29 no.10
• /
• pp.703-725
• /
• 2002

It is well recognized that component-based development (CBD) is an effective approach to manage the complexity of modem software development. To achieve the benefits of low-cost development and higher productivity, effective techniques to maximize component reusability should be developed. Component is a set of related concepts and objects, and provides a particular coarse-grained business service. Often, these components include various message flows among the objects in the component, called 'business workflow`. Blackbox components that include but hide business workflow provide higher reusability and productivity. A key difficulty of using blackbox components with business workflow is to let the workflow be customized by each enterprise. In this paper, we provide techniques to model the variability of family members and to customize the business workflow of components. Our approach is to provide formal specification on the component variability, and to define techniques to customize them by means of the formalism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.704-712
• /
• 2010

Recently, the lack of the frequency have been emerged due to the use of various wireless terminals. To find solutions for obtaining new frequency resources and for avoiding an interference, a cognitive radio technology have focused on as the new technology that can use the whitespace in TV broadcasting band. In this paper, the Cognitive Radio terminal system for whitespace in TV band is first introduced. The purpose of the CR terminal platform is to evaluate the feasibility of the unlicensed wireless service in the TV band. Then, we design and develop the software for Sensing MAC applied the cognitive radio terminal system. The developed Sensing MAC software based on IEEE 802.22 specification can be aware of using the whitespace in TV band that operates on cognitive radio terminal system. Finally, we have tested for evaluating the sensing MAC module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2719-2730
• /
• 2009

In this paper, we implement the measurement functionality for performance measurements of EDGE (Enhanced Data Rates for GSM Evolution) terminal by using software. Generally speaking, the receiving algorithms in normal MODEM cannot be used directly to a measurement system due to the lack of accuracy. Therefore, we propose a new receiver algorithm for precise EDGE signal measurements. In the proposed algorithm, 2-stage (coarse stage, fine stage) parameters estimation (symbol-timing, frequency offset, carrier phase) scheme is used. To improve the estimation accuracy, we increase the number of the received signal samples by interpolation. The proposed EDGE signal measurement algorithm can be used for verifying the hardware measurement system, and also can be used for the commercial systems through software optimization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.192-196
• /
• 2010

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. The strength of the PLC has no more additional wiring work. PLC has also possible to high quality data transmission with currently electrical cable. It has a various strong point campare with existing wire and wireless communication technologies. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. The video function was used for the VEDEO TEST GENERATOR in order to a property valuation. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal. It can be possible to have HD class Media service through the PLC.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1351-1362
• /
• 2009

The importance of interoperability in modem warfare has been increasing ever since. Korean Ministry of National Defense has constructed and used the Systems Interoperability Test & Evaluation System in order to evaluate level of interoperability among defense information systems. However, as primary targets of SITES were information systems, there is limitation to be applied to weapon systems. This paper proposes an interoperability testing architecture and interoperability testing configuration items which encompass various aspects of interoperability testing. We developed a prototype which proved that the proposal can be realized and useful.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.11
• /
• pp.853-858
• /
• 2006

In this paper, we propose a practical method for hardware-accelerated rendering of the depth image-based representation(DIBR) of 3D graphic object using graphic processing unit(GPU). The proposed method overcomes the drawbacks of the conventional rendering, i.e. it is slow since it is hardly assisted by graphics hardware and surface lighting is static. Utilizing the new features of modem GPU and programmable shader support, we develop an efficient hardware-accelerating rendering algorithm of depth image-based 3D object. Surface rendering in response of varying illumination is performed inside the vertex shader while adaptive point splatting is performed inside the fragment shader. Experimental results show that the rendering speed increases considerably compared with the software-based rendering and the conventional OpenGL-based rendering method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4512-4526
• /
• 2018

The Internet of Things (IoT) has become an emerging industry that is broadly used in many fields from industrial and agricultural manufacturing to home automation and hospitality industry. Because of the sheer number of connected devices transmitting valuable data, the IoT infrastructures have become a main target for cyber-criminals. One of the key challenges in protecting IoT devices is the lack of security measures by design. Although there are many hardware and software based security solutions (firewalls, honeypots, IPDS, anti-virus etc.) for information systems, most of these solutions cannot be applied to IoT devices because of the fact that IoT devices have limited computing resources (CPU, RAM,). In this paper, we propose a honeypot system called HoneyThing for modem/router devices (i.e. a kind of IoT device). HoneyThing emulates TR-069 protocol which is prevalent protocol used to remotely manage customer-premises equipment (CPE) devices, e.g. modems, routers. Honeything also serves an embedded web server simulating a few actual, critical vulnerabilities associated with the implementation of TR-069 protocol. To show effectiveness of the HoneyThing in capturing real world attacks, we have deployed it in the Internet. The obtained results are highly promising and facilitate to reveal network attacks targeting to CPE devices.