• 전자통신동향분석
• /
• 제18권5호통권83호
• /
• pp.63-72
• /
• 2003

소프트웨어의 신뢰성을 정량적으로 평가하는 데 있어서 소프트웨어 개발 프로세스의 시험단계나 사용자의 운용단계에 처한 동적 환경상태에서 소프트웨어 고장발생기능 현상을 기술한 소프트웨어 신뢰도성장모델을 많이 제안하고 있다. 대다수의 모델이 발생된 소프트웨어 고장의 발생원인에 대한 완전한 수정을 요구하는 완전 디버깅 환경을 가정하고 있다. 그러나 실제 개발자가 디버깅 작업을 수행할 때 완전한 수정이 불가능하기 때문이다. 다시 말해서 여러 소프트웨어 개발자가 경험한 이러한 디버깅 작업을 행하는 경우에는 결함을 제거하는 데 한계가 있기 때문에 수정 작업시 새로운 결함이 삽입되는 경우가 많다. 즉, 결함 수정은 불완전 환경에 처한다. 본 논문에서는 결함 수정시 신규 결함의 삽입 가능성을 고려하고 불완전 디버깅 환경에 대한 소프트웨어 신뢰도 성장모델을 제안한다. 소프트웨어 동작 환경 하에서 발생된 소프트웨어 고장과 시험 전 소프트웨어 내의 고유 결함에 의한 고장과 동작중에 랜덤하게 삽입된 결함에 의해 발생되는 고장 등 2종류의 결함을 고려하여 비동차 포아송과정(NHPP)에 의한 소프트웨어 고장발생 현상을 기술한다. 또한 소프트웨어 신뢰성 평가에 유용한 정량적인 척도를 도출하고 실측 데이터를 이용하여 적용한 결과를 제시하고 기존의 모델과의 적합성을 비교, 분석한다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제11권4호
• /
• pp.305-311
• /
• 2005

휴대전화와 PDA 등에서 수행되는 플래시 메모리 소프트웨어는 돌발적인 전원 중단이나 기록매체 폴트에 대처하기 위하여 충분히 테스트되어야 한다 이러한 테스트를 위하여, 폴트 삽입 기능을 가지는 플래시 메모리 에뮬레이터를 설계하고 구현하였다. 폴트 삽입을 통한 테스트 기법은 FTL(Flash Translation Layer)과 플래시 메모리 기반 파일 시스템의 폴트 회복 기법을 설계하고 폴트로 인한 피해를 분석하는데 유용한 도구로 사용되었다. 본 논문에서는 플래시 메모리에서 관찰되는 폴트의 유형과 플래시 메모리 에뮬레이터에서 구현된 폴트 삽입 기능에 대해 설명한다. 그리고 폴트 삽입 테스트 과정에서 밝혀진 디자인 결함에 대하여 설명한다. 특히 신뢰성을 향상하기 위하여 도입된 기능이 신뢰성을 향상하기 보다 피해를 유발하는 것으로 밝혀졌다. 마지막으로 FTL과 파일 시스템의 "폴트 후 동작"에 대해 설명한다

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1622-1625
• /
• 2005

In modern Automobile Engineers, Modularize of parts is developing tendency that is more effective manufacture system and maintenance, and it also can be bring down the production cost. In this study will expect faults of mold and find the optimum of Casting Condition from the Simulation software (Z-CAST), tensile specimen is attempted for define the basic properties and process condition. In reasult, Diecasting of Seat Motor Housing is expected to be best fitted in Works.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.291-296
• /
• 2015

Transmission line is exposed to a large area, and then faults are likely to occur than the other component of power system. When a fault occurs on a transmission line, fault locator helps fast recovery of power supply on power system. This paper deals with the design of a digital fault locator for improvement accuracy of the fault distance estimation and a fault occurrence position for transmission line. The algorithm of a fault locator uses a DC offset removal filter and DFT filter. The algorithm utilizes a fault data of GPS time synchronized. The computed fault information is transmitted to the other side substation through communication. The digital fault locator includes MPU module, ADPU module, SIU module, and a power module. The MMI firmware and software of the fault locator was implemented.

• 대한산업공학회지
• /
• 제20권1호
• /
• pp.71-85
• /
• 1994

Overhead cranes which carry heavy items in construction or production areas consist of structure and electric modules. More than 80% of breakdowns bring out of the electric module. As operators do not know all about cranes, it sometimes takes much time to repair the cranes. In order to resolve this problem, the expert system which can diagnose causes of faults and give instructions for repair to operators, has been developed. The scope of the paper is limited to the electric module. First of all, analyzing symptoms and causes, we have developed a rule base with the expert system shell, EXSYS. Furthermore, for the facility maintenance including repair instructions against the causes, the instruction data base was developed with FOXPRO. On the other hand, for the help of user's understanding the fault causes, the graphic animation module which shows malfunctioning component ports or motions in 3D was developed with the graphic software, TOPAS VGA.

• Earthquakes and Structures
• /
• 제12권2호
• /
• pp.191-200
• /
• 2017

In this paper, the seismic performance of reinforced concrete braced frames (RC-BF) under far- and near-fault motions was investigated. Four-, eight-, 12- and 16-story RC-BFs were designed on the basis of a code-design method for a high risk seismic zone. Nonlinear static and dynamic analyses of the frames have been performed using OpenSees software. To consider diverse characteristics of near-fault motions, records with forward-directivity and fling-step effects were employed. From the results obtained in the analytical study it is concluded that the used design method was reasonable and the mean maximum drift of the frames under all ground motion sets were in acceptable range. For intermediate- and high-rise buildings the near-fault motions imposed higher demands than far-faults.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.83-84
• /
• 2006

Lightning induced faults accounts for more than 66% at the transmission lines of KEPCO. The lightning causes damages to power system equipments including transmission line, the shut down of electricity and the electro-magnetic interference. Because of this reason, we need the real time lightning information for the optimal operation of power system. And, it is required to obtain and accumulate the lightning current parameters for the insulation design. A lightning detection system, LPATS, has been operated since 1995 in KEPCO. For the improved detection efficiency, we had in stalled the new lightning detection network named as KLDNet in 2005. Also, we had developed the new software for the lightning parameters analysis and real time information service on the WEB. In this paper, we would like to introduce about the new system.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.36-41
• /
• 2011

Nowadays, the solar expose right is very important with people's life. Therefore, in calculating the sunshine hours, the point analysis and area analysis methods are used in previous studies. Previous two methods have merits and faults. Therefore, ray-tracing method is used as a alternative. Ray-tracing method is adopted by the software of Autodesk Ecotect which is a widely used program by the architectural company and academic university. In this study first, ray-tracing methodology is studied with how to calculate the overshadowing area and, secondly, the sensitivity of the two major factors, overshadowing accuracy and sky subdivision, is analyzed. With these results, appropriate application of the ray-tracing method is presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.800-804
• /
• 2005

Load flow and short circuit fault transients of a power distribution system with wind turbines as dispersed generation units is presented. Usage of renewable energies such as wind is already a small part of total installed power system in medium and low voltage networks. In this paper, a radial power distribution system with wind turbines is simulated using DIgSILENT PowerFactory software for their influence on load flow and short circuit fault transients. Short fault occurring in dispersed generation systems causes some problems for the system and costumers such as fault level increase or the problems of sudden fluctuations in the current, voltage, power and torque of the double fed induction machine utilized in the wind turbines which have been studied and investigated.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권4호
• /
• pp.14-18
• /
• 2017

In this paper, an contemplate the direction for Usable Security in IT security and User Experience. To evaluate how the user interface is convenient to use, we examine the components such as the property, learnable property, memory simplicity, faults and satisfaction level. By considering for the security, we should bring positive effects on the user experience. By emphasizing usability and security at the same time, we should increase the satisfaction level of the user experience and then produce the valuable experience through participation, use and observation. The positive user experience is the important task for the software engineering, business administration and others., and this will result satisfaction of the users, brand trust, and success in the market. On the other hand, for the negative user experience, the users cannot achieve their desired goal and therefore, are unsatisfied due to emotional, rational and economic inconvenience. Due to this, we should try to maintain a certain level of usability and security of the system in IT security and User Experience.