• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.862-871
• /
• 2005

In this paper, the modified design equation of shielding effectiveness was presented to predict more accurately the shielding effectiveness of honeycomb structure with hexagonal waveguide. The design equation of shielding effectiveness in honeycomb was represented from adding shielding effectiveness of single lattice to shielding effectiveness of infinite array of single lattice. This paper proposed the generalized design equation of shielding effectiveness by analyzing basis lattice of hexagonal waveguide which composes honeycomb structure and infinite array structure of basis lattice. To provide the validity of the modified design equation of shielding effectiveness in this paper, comparison with other available date using 3D EM commercial software is made.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.59-66
• /
• 2013

This study rehabilitation assistive technology system for people with disabilities employed by a company in the field of occupations and job satisfaction have adapted to, and for the rehabilitation assistive technology support(rehabilitation assistive technology hardware and the software) and service quality based on the quality of convenient for employees to work life by analyzing the factors that can act on adaptation employees on behavioral intentions was to determine the overall impact. Seoul, Gyeonggi, Incheon companies based in vocational education and training received in the employment of the disabled subject questionnaires were distributed, and finally 594 valid questionnaires were minor. In order to test the hypothesis SEM(structural equation model) were used, the results of this study can be summarized as follows. First, rehabilitation assistive technology hardware quality of the quality of rehabilitation assistive technology software affected. Second, rehabilitation assistive technology software quality on the quality of the service quality affected. Third, rehabilitation assistive technology hardware quality on the quality of the service quality affected. Fourth, quality of service, the quality of the adaptation of action for employees affected also. Fifth, rehabilitation assistive technology software for adaptive quality of the employees also had an impact on behavior. Sixth, rehabilitation assistive technology hardware to adapt the quality of the employees affected. And parameters (quality of service quality) influenced to as indirect effects. The results of this study support the rehabilitation assistive technology and rehabilitation assistive technology hardware and software) based, quality of service and quality of fused form acceptable to, the degree of action for employees to adapt more implications that may affect have provided.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.666-669
• /
• 2002

In this Research, we would like to perform optimal design by using theoretical equation and experimental equation for development of transmission and P.T.O on work vehicle with multi-function that is suited fruit cultures in my country. For the purpose of reducing development period about product and minimizing risk about design error, detail design and interference check are accomplished by FEM analysis and CAD software.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.391-399
• /
• 2006

In order to solve the optimization problem of designing the trajectory of three-dimensional horizontal well, we establish a multi-phase, nonlinear, stochastic dynamic system of the trajectory of horizontal well. We take the precision of hitting target and the total length of the trajectory as the performance index. By the integration of the state equation, this model can be transformed into a nonlinear stochastic programming. We discuss here the necessary conditions under which a local solution exists and depends in a continuous way on the parameter (perturbation). According to the properties we propose a revised Hooke-Jeeves algorithm and work out corresponding software to calculate the local solution of the nonlinear stochastic programming and the expectancy of the performance index. The numerical results illustrate the validity of the proposed model and algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.6
• /
• pp.420-425
• /
• 2015

In this paper a transfer matrix method is developed to solve for bending vibration of beam with linearly reduced width, and subsequently used to determine the exact natural frequencies for such problems. The differential equation, shear force, and bending moment are derived from Hamilton's principle, and the roots of the differential equation are computed using the power series solution of the Frobenius method. The effect of various taper ratio for bending vibration of beam with linearly reduced width is investigated in detail, and to validate the accuracy of the proposed method the results computed are compared with those given from commercial software(ANSYS).

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.304-309
• /
• 1986

This paper is about the Inverse Jacobian for the TOP-1 robot. The robot Jacobian is used for the movement in accordance with differental changes. A Matrix and Homogeneous Transformation Matrix, Differential Motion Vector D are applied to Jacobian equation for the movement of the robot in accordance with the minut changes. The solution of Jacobian equation is acquired and applied for the subtle movement of each arms of the robot. The interface with APPLE-II Micro-computer is searched out too. The Software and the interface resulted from this paper are considered to be higly useful in the accurate control on the robot when they are linked with dynamics of robot.

• Journal of applied mathematics & informatics
• /
• v.7 no.3
• /
• pp.905-915
• /
• 2000

In this article we discuss some aspects of operational Tau Method on delay differential equations and then we apply this method on the differential delay equation defined by $\omega(u)\;=\frac{1}{u}\;for\;1\lequ\leq2$ and $(u\omega(u))'\;=\omega(u-1)\;foru\geq2$, which was introduced by Buchstab. As Khajah et al.[1] applied the Recursive Tau Method on this problem, they had to apply that Method under the Mathematica software to get reasonable accuracy. We present very good results obtained just by applying the Operational Tau Method using a Fortran code. The results show that we can obtain as much accuracy as is allowed by the Fortran compiler and the machine-limitations. The easy applications and reported results concerning the Operational Tau are again confirming the numerical capabilities of this Method to handle problems in different applications.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.4
• /
• pp.151-157
• /
• 2006

A two-dimensional numerical model to study the performance of anode-supported flat-tube solid oxide fuel cell (SOFC) far the cross section of the cell in the flow direction of the fuel and air flows is developed. In this model a mass and charge balance, Maxwell-Stefan equation as well as the momentum equation by using, Darcy's law are applied in differential form. The finite element method using FEMLAB commercial software is used for meshing, discritization and solving the system of coupled differential equations. The current density distribution and fuel consumption as well as water production are analyzed. Experimental data is used to verify a predicted voltage-current density and power density versus current density to judge on the model accuracy.

• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.168-173
• /
• 2004

Microforming can be a good application for bulk metallic glasses. It is important to simulate the deformation behaviour of the bulk metallic glasses in a supercooled liquid region for manufacturing micromachine parts. For these purposes, a correct constitutive model which can reproduce viscosity results is essential for good predicting capability. In this paper, we studied deformation behaviour of the bulk metallic glasses using the finite element method in conjunction with the fictive stress constitutive model which can describe non-Newtonian as well as Newtonian behaviour. A combination of kinetic equation which describes the mechanical response of the bulk metallic glasses at a given temperature and evolution equations fur internal variables provide the constitutive equation of the fictive stress model. The internal variables are associated with fictive stress and relation time. The model has a modular structure and can be adjusted to describe a particular type of microforming process. Implementation of the model into the MARC software has shown its versatility and good predictive capability.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.755-760
• /
• 1990

VAXIMA is a computer software which gives us results in terms of parameters. We use VAXIMA to analyze quantitatively a conservative dynamical system with cubic and quintic nonlinear terms. The system is described by a nonlinear second-order autonomous ordinary differential equation. Using the Lindstedt-Poincare method, we obtain period-amplitude characteristics. In order to check the validity of the approximate solution, we integrate numerically the equation of motion.