• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.380-385
• /
• 1993

The demand for automatic manufacturing systems is incerasing. Computer Integrated Manufacturing(CIM) technology is believed to be a solution for the problem to enhance productivities and flexibilities. Although researches on CIM have been conducted treendously, application of the technology is not widely accepted yet. The CIM research on the shop floor starts with the Flexible Manufacturing System(FMS). One of the crucial obstacles to the FMS is the lack of excellent strategies for efficient operations. The aim of this research is constructing an automation scheme in the low level of factories where various machinaries are involved. An operating strategy is established for an automation unit named as a cell which resides between the upper level computers and manufacturing shop floor. The cell is defined to fit into the total manufacturing system. The defined cell has more functions than conventional cells. A scheduling scheme is adopted for the shop floor operations. A set of software has been developed and tested through simulations and shop floor experiments.

• 시스템엔지니어링학술지
• /
• 제7권1호
• /
• pp.9-21
• /
• 2011

Assuming that the Capability Maturity Model Integration for Development v1.2 (CMMI) could be applied to an organization more effectively if the content similarities among practices were improved in terms of structure and composition, this paper presents the analysis of the correlations between the CMMI Specific Practices (SP) and Generic Practices (GP) for the Maturity Level 2 and 3 Process Areas using the Chi-square independence test. According to the analysis, a 22.2% correlation was observed. To minimize the problem of repeatedly applying similarities, 6 GPs that are highly correlated with the SPs were grouped together. Then, three different improvement plans: 1) development of a standard template-based project plan, 2) establishment of a configuration management system based on open source software to control work products and leverage experience, and 3) establishment of project assurance through an independent quality assurance-based organization and intensive review by higher-level management - were defined.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 추계학술발표논문집 (상)
• /
• pp.239-242
• /
• 2003

본 논문에서는 학습자의 요구와 무관한 학습 컨텐츠 제공의 문제점을 알아보고, 학습자의 요구에 부합되는 강의 컨텐츠제공을 위한 방법을 제안한다. 기존의 LMS(Learning Management System)는 시간적, 공간적 제약을 받지 않고 교육이 가능하다는 온라인 교육의 장점에도 불구하고 학습자의 요구와 수준에 무관하게 학습과 관련한 컨텐츠들이 획일적으로 구성됨으로써, 학습자의 요구를 만족시키지 못하고있다. 이에 본 논문에서는 학습에 필요한 강의 컨텐츠 생성 시 효율성과 재사용성을 높인 SCORM을 기반으로 하여 학습 컨텐츠를 생성하고, 평가된 학습자의 학습 수준을 통해서, 학습자의 수준에 맞는 강의 컨텐츠를 제공하는 학습자 수준별 학습 시스템(Learner Level e-Learning System)을 구현하였다. 이를 통해 컨텐츠 저작자는 학습 객체의 재사용이 가능하며, 학습자는 요구에 충족하는 강의를 수강하는 것이 가능하다.

• 품질경영학회지
• /
• 제34권1호
• /
• pp.1-12
• /
• 2006

This paper presents a six sigma project for improving gate painting quality in a medium-sized automotive part company. The project follows a disciplined process of five macro phases: Define, Measure, Analyze, Improve, and Control. A CTQ(critical to quality) is determined based on COPQ(cost of poor quality) analysis, and a process map is utilized for identifying process input variables. Three KPIV s(key process input variable) are selected; Painting Temperature, Painting Quantity, and Painting Viscosity, and DOE(design of experiments) is utilized for finding the optimal process conditions for three KPIVs. MINITAB software is used for data analyses and DOE. The sigma level of defects rate has improved from 2.93 to 3.66.

• 산업경영시스템학회지
• /
• 제6권9호
• /
• pp.45-59
• /
• 1983

This study focuses on the growth and development of small and medium industries of Korea, orienting to the development of up-to-date technology from now on and bolstering their competitive ability in the rapidly changing international markets. For this purpose, the small and medium industries should 1) develop high-level manpower of up-to-date technology, 2) make constant efforts to categorize and divide the fields of technology with big business groups to boost their competitiveness, 3) raise automation rate by turning all facilities into mechatronics, 4) positively develop software know-how, 5) jointly conduct researches in cooperation with venture capital and Governmental research institute, 6) categorize an systematize the industries. On the Governmental level, there should be 1) wide-ranging support and assistance in technology, finance, and the facilities, 2) positive opening of consumer market, 3) assistance in technical cooperation with other nations, 4) and such indirect assistance as fostering the fields of related technology.

• Advances in nano research
• /
• 제5권1호
• /
• pp.27-34
• /
• 2017

One of the methods of removing cyanide from wastewater is surface adsorption. We simulated the removal of cyanide from a synthetic wastewater in the presence of Titanium dioxide nano-particles absorbent uses VISUAL MINTEQ 3.1 software. Our aim was to determine the factors affecting the adsorption of cyanide from synthetic wastewater applying simulation. Synthetic wastewater with a concentration of 100 mg/l of potassium cyanide was used for simulation. The amount of titanium dioxide was 1 g/l under the temperature of $25^{\circ}C$. The simulation was performed using an adsorption model of Freundlich and constant capacitance model. The results of simulation indicated that three factors including pH, nanoparticles of titanium dioxide and the primary concentration of cyanide affect the adsorption level of cyanide. The simulation and experimental results had a good agreement. Also by increasing the pH level of adsorption increases 11 units and then almost did not change. An increase in cyanide concentration, the adsorption level was decreased. In simulation process, rising the concentrations of titanium dioxide nanoparticles to 1 g/l, the rate of adsorption was increased and afterward no any change was observed. In all cases, the coefficient of determination between the experimental data and simulation data was above 0.9.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.485-493
• /
• 2018

Statistical analysis has found useful application in the design of experiments (DOE) especially optimization of concrete ingredients however, to be able to apply the concept properly using computer aided applications there has to be an upper and lower limits of responses fed to the system. In this study, the production of high-performance steel fiber concrete (HPSFC) at five different fiber addition levels by volume with two aspect ratios of 60 and 83 were studied under two curing methods completely dry cured (DC) and moist cured (MC) conditions. In other words, this study was carried out for those limits based on material properties available in North Cyprus. Specimens utilized were cubes 100 mm size casted and cured for 28 days and tested for compressive strength. Minitab 18 statistical software was utilized for the analysis of results at a 5 per cent level of significance. Experimentally, it was observed that, there was fluctuation in compressive strength results for the two aspect ratios and curing regimes. On the other hand P-value hypothesis evaluation of the response showed that at the stated level of significance, there was a statistically significant difference between dry and moist curing conditions. Upper and lower limit values were proposed for the response to be utilized in DOE for future studies based on these material properties. It was also suggested that for a narrow confidence interval and accuracy of the system, future study should increase the sample size.

• 대한의용생체공학회:의공학회지
• /
• 제44권3호
• /
• pp.176-181
• /
• 2023

During cancer treatment, the patient's response to drugs appears differently at the cellular level. In this paper, an image-based cell phenotypic feature quantification and key feature selection method are presented to predict the response of patient-derived cancer cells to a specific drug. In order to analyze the viability characteristics of cancer cells, high-definition microscope images in which cell nuclei are fluorescently stained are used, and individual-level cell analysis is performed. To this end, first, image stitching is performed for analysis of the same environment in units of the well plates, and uneven brightness due to the effects of illumination is adjusted based on the histogram. In order to automatically segment only the cell nucleus region, which is the region of interest, from the improved image, a superpixel-based segmentation technique is applied using the fluorescence expression level and morphological information. After extracting 242 types of features from the image through the segmented cell region information, only the features related to cell viability are selected through the ReliefF algorithm. The proposed method can be applied to cell image-based phenotypic screening to determine a patient's response to a drug.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.739-750
• /
• 2023

This study examines the two-level behavior of the toggle brace damper within a steel frame having a yielding pipe damper and rotational friction damper. The proposed system has two kinds of fuse for energy dissipation in two stages. In this mechanism, rotational friction damper rather than hinged connection is used in toggle brace system, connected to a pipe damper with a limited gap. In order to create a gap, bolted connection with the slotted hole is used, such that first a specific movement of the rotational friction damper solely is engaged but with an increase in movement, the yielding damper is also involved. The performance of the system is such that at the beginning of loading the rotational friction damper, as the first fuse, absorbs energy and with increasing the input load and further movement of the frame, yielding damper as the second fuse, along with rotational friction damper would dissipate the input energy. The models created by ABAQUS are subjected to cyclic and seismic loading. Considering the results obtained, the flexibility of the hybrid two-level system is more comparable to the conventional toggle brace damper. Moreover, this system sustains longer lateral displacements. The energy dissipation of these two systems is modeled in multi-story frames in SAP2000 software and their performance is analyzed using time-history analysis. According to the results, permanent relocations of the roof in the two-level system, in comparison with toggle brace damper system in 2, 5, and 8-story building frames, in average, decrease by 15, 55, and 37% respectively. This amount in a 5-story building frame under the earthquakes with one-third scale decreases by 64%.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권5호
• /
• pp.195-200
• /
• 2014

능동 개체 윤곽 추출의 대표적인 방법은 스네이크(Snake)와 레벨 셋(Level Set) 기술이다. 일반적으로 스네이크는 속도는 빠르나 개체 위상을 처리하는 데 제약이 있다. 그러나 레벨 셋은 속도는 느리지만 개체 위상에 관계없이 잘 처리할 수 있는 장점이 있다. 본 논문에서는 빠르고 복잡한 위상을 처리하기 위해 두 방법의 장점을 이용한 알고리즘을 제안한다. 알고리즘은 2단계로 구성된다. 첫 번째 단계는 스네이크를 사용하여 빠르게 개체의 대략적인 윤곽을 추출한 후 레벨 셋을 두 번째 적용하여 복잡한 개체 윤곽을 정확하게 추출한다. 제안한 알고리즘은 다양한 위상을 갖는 5개의 이진영상 및 2개의 자연영상에 적용하여 속도 및 윤곽 추출이 개선된 것을 보여 준다.