• 대한음성학회지:말소리
• /
• 제61호
• /
• pp.15-29
• /
• 2007

The present study investigates acoustic cues of russian soft plosive consonants. In previous studies, russian soft consonants are distinguished from hard consonants by F1, F2 of following vowels. The result showed: (1) that F0 of soft plosive consonants in following vowels were lower than those of hard plosive consonants; (2) and that VOT of soft plosive consonants were longer than those of hard plosive consonants. Hence, the present that, in addition to F1, F2, VOT and F0 are detected as acoustic cues that differentiate soft plosive consonants from hard plosive consonant in Russian.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.39-46
• /
• 2019

Polydimethylsiloxane (PDMS)를 베이스 기판으로 사용하고 이보다 강성도가 높은 flexible printed circuit board (FPCB)를 island 기판으로 사용하여 island-bridge 구조의 soft PDMS/hard PDMS/FPCB 신축 패키지를 형성하고, 이의 유효 탄성계수와 변형거동을 분석하였다. 각기 탄성계수가 0.28 MPa, 1.74 MPa 및 1.85 GPa인 soft PDMS, hard PDMS, FPCB를 사용하여 형성한 soft PDMS/hard PDMS/FPCB 신축 패키지의 유효 탄성계수는 0.58 MPa로 분석되었다. Soft PDMS/hard PDMS/FPCB 신축 패키지에서 soft PDMS의 변형률이 0.3이 되도록 인장시 hard PDMS와 FPCB의 변형률은 각기 0.1과 0.003이었다.

• Safety and Health at Work
• /
• 제14권1호
• /
• pp.31-42
• /
• 2023

Background: This study analyzes the linear and non-linear effects of the hard and soft dimensions of job quality on the overall health of wage workers. It also examines the congruence or fit between the hard and soft job quality on the overall health of wage workers. Methods: This study measured thirty indicators that constitute job quality and reduced the indicators into twelve sub-dimensions of job quality using reflective factor analysis. In addition, this study derived two dimensions of job quality from the twelve subdimensions, namely the hard and soft job quality using formative factor analysis. This paper applied the response surface analysis to analyze the congruence effect between the two dimensions of job quality. Results: A logarithmic relationship was found between the dimension of hard job quality and the worker's overall health. This study also verified that the congruence effect between the two dimensions of job quality does not exist, and the combined effect of job quality is lower when the two dimensions of job quality are at the same level than the effect when either level of job quality is high or low. Conclusions: Although hard and soft job quality has independent positive effects on the overall health of wage workers, the two dimensions of job quality are not congruent or not in harmony with each other. This incongruence between hard and soft job quality, together with a higher impact of hard job quality, suggests that the role of soft job quality on overall health is relatively limited.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.71-75
• /
• 1998

Segmented block copolymer인 polyurethane은 열역학적으로 불친화성을 갖는 두 segment unit (Hard segment unit과 Soft segment unit)에 의해 미세 상분리 현상이 나타나며 그 결과 hard-segment-rich hard domain과 soft-segment-rich soft matrix 구조를 갖는다. 상온보다 높은 유리전이온도를 갖는 hard segment와 낮은 유리전이온도를 갖는 soft segment의 특성으로 인해 polyurethane은 열가소성 탄성체의 성질을 갖으며 두 성분의 조성비에 따라 넓은 범위의 역학적인 성질을 나타낸다.(중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.466-469
• /
• 2002

Polyurethane(PU)은 segmented 블록공중합체로써 상온보다 높은 유리전이온도(glass transition temperature, Tg)를 갖는 hard segment(H.S)와 상온보다 낮은 Tg를 갖는 soft segment (S.S)로 구성되어 있다. 이들 두 segment간의 열역학적 불친화성으로 인해 미세 상분리 구조를 갖는다$^1$. 그 결과 hard segment-rich hard domain과 soft segment-rich soft matrix의 구조를 이룬다. 이중 hard domain(HD)은 상온에서 glassy한 성격을 띄므로 물리적 가교점과 충진제의 역할을 하며 soft domain(SD)은 rubbery한 성질을 가지므로 polurethane에 탄성을 부여하는 역할을 한다. (중략)

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.4.1-4.1
• /
• 2010

In the first part, after discussing works on nacre, a soft-hard composite found in nature, including a simulation on network mimicking nacre [1-4], we talk on a simple model of spider webs, another example of natural soft-hard structure [5]. We demonstrate that the web network is free of stress concentrations because the radial threads are stronger than the spiral threads. In the second part, after reviewing our works on wetting on textured surfaces [6-8], we discuss penetration into textured surface and instability of a liquid film on textured substrates during spin coating [9,10].

• Carbon letters
• /
• 제10권3호
• /
• pp.190-197
• /
• 2009

Various silanes, amino silane, vinyl silane, sulfur silane (TESPD), and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB) and CIIR/hard clay/CB compounds and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. Comparing hard clay and soft clay filled compounds, hard clay (Suprex) filled system shows a higher die C tear than the soft clay (GK) filled one. The other properties (Mooney, extrusion torque/pressure, torque rise ($M_H-M_L$), modulus at 300%) are close to each other. Among various silanes, the ZS treated hard clay (Suprex) compound shows the highest mechanical property following hard clay(S)/vinyl silane(V) and soft clay(GK)/vinyl silane(V) compounds. The TESPD and the ZS effectively helps a formation of a strong 3-dimensional network structure between silica and CIIR via coupling reaction due to bifunctional nature of TESPD. In addition to that, the ZS added compounds show both a better processability and mechanical properties compared to the S2 ones at low concentration due to improved compatibility between zinc soap and CIIR matrix. Only the ZS added compound shows both improved processabilities (Mooney, Extrusion torque-& pressure) and improved mechanical properties (degree of crosslinking, elongation modulus, tear, and fatigue to failure counts) on both CIIR/hard clay/CB and CIIR/soft clay/CB compounds.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.63-69
• /
• 2000

Le fort II osteotomy is much useful technique to correct the midfacial hypoplasia including nasomaxillary complex especilly in patient with dish face appearance. Not in simple orthognathic surgery but in Le Fort II osteotomy, the standardization of prognostic value is essential in treatment planning to achieve satisfactory postoperative results. According to pervious reports, the ratio of soft tissue change to hard tissue movements varies as to different surgical methods and different facial regions. But there are few report about the ratio of soft tissue change to hard tissue movement following Le Fort II osteotomy. So we tried to develop standarized soft tissue surgical treatment objective. We have followed up 16 patients, who had received Le Fort II osteotomy by one operator from 1990 to 1996, one year postoperatively. In cephalometrics, we used Frankfort line as horizontal reference line, and vertical reference line as one drawn from Sella to horizontal line perpendicularly. The landmarks are G to soft tissue G, N on reference line to soft tissue N, ANS to Pn and A to Sn. The results are as follows. 1. The value of soft tissue change to hard tissue movement showed positive correlation, having statistical significancy at G, N2, N3 point. 2. At G, N2, N3 point, the ratio of soft tissue change to hard tissue movement was 0.51, 0.98 and 0.80 respectively and showed statistical significancy, while at N1, ANS, A point, that was 0.72, 0.49 and 0.26 but didn't showed statistical significance. 3. This result shows much the same change of the soft tissue change to hard tissue movement on the upper nasomaxilla, and less the same change on the lower maxilla and so the Le Fort II osteotomy can be recommended as a reliable effective operation method for correction of nasomaxillary retrusion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권3호
• /
• pp.250-259
• /
• 1997

The purpose of this study was to evaluate the interrelationship of the soft and hard tissue changes after both maxillary and mandibular anterior segmental surgery in bimaxillary protrusion patients. 11 patients had received both maxillary and mandibular anterior segmental surgery and were investigated radiologically with lateral cephalogram. The results were as follows : 1. The correlation of maxillary hard and soft tissue horizontal changes were relative high. : Coefficient between UIE and Stms was 0.89 (p<0.001). 2. The correlation of mandibular hard and soft tissue horizontal changes were very high, especially at the chin. : Coefficients were over 0.90 (p<0.001) 3. All points were moved superiorly except SLS, LS, Stms. 4. Upper and lower lip convexity to the E-Line were decreased (p<0.001) and postsurgical facial profiles were changed very esthetically.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.35-44
• /
• 2011

For printed electronic paper making which is high leveled dimensional stability. The furnish which is hard wood pulp and soft wood pulp, mixed with hard and soft wood pulp is added sea algae pulp. If sea algae pulp was added 15% contents, paper which is made with hard wood pulp is increased about 28% dimensional stability and soft wood pulp is increased about 32%, dimensional stability and hard wood 30% and soft wood 70% mixed pulp is increased about 40% dimensional stability.