• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.115-120
• /
• 2014

PURPOSE. The aim of this in vitro study was to evaluate the effect of aging on the tear strength and cytotoxicity of four soft denture lining materials. MATERIALS AND METHODS. Four commonly used soft denture lining materials, (Coe-Comfort$^{TM}$ GC America Inc., Alsip, IL, USA; Coe-SOFT$^{TM}$ GC America Inc., Alsip, IL, USA; Visco-gel Dentsply Caulk Milford, DE, USA; and Sofreliner Tough M Tokuyama Dental Corporation Tokyo, Japan) were selected. Sixty trouser-leg designed specimens per lining material were fabricated using a stainless steel mold for tear strength testing. The specimens were divided into non-thermocycling and 1000-, and 3000-thermocycling groups. For the cytotoxicity test, twenty-four disk shaped specimens per material were fabricated using a stainless steel mold. The specimens were soaked in normal saline solution for 24 h, 48 h and 72 h. Cytotoxicity was measured by XTT assay in L929 mouse fibroblasts. Data were analyzed by two way analysis of variance and Dunnett's test (P<.05). RESULTS. Before thermocycling, Sofreliner Tough M ($10.36{\pm}1.00N$) had the highest tear strength value while Coe-Comfort$^{TM}$ ($0.46{\pm}0.10N$) had the lowest. After 3000 cycles, Sofreliner Tough M ($9.65{\pm}1.66N$) presented the highest value and Coe-Comfort$^{TM}$ ($0.42{\pm}0.08N$) the lowest. Sofreliner Tough M, in all incubation periods was the least toxic with significant differences compared to all other materials (P<.05). Coe-Comfort$^{TM}$, Coe-$SOFT^{TM}$, and Sofreliner Tough M did not show any significant differences within their material group for all incubation periods. CONCLUSION. This in vitro study revealed that aging can affect both the tear strength and cytotoxicity of soft denture materials depending on the composition.

• 한국안광학회지
• /
• 제14권1호
• /
• pp.39-45
• /
• 2009

목적: 본 연구는 약도의 근시성 난시안의 토릭 소프트 렌즈와 다른 교정 방법의 효과를 알아보기 위해 대비감도 검사와 눈부심 장애 검사를 이용하여 시력의 질을 비교하였다. 방법: 1.50D이하의 경도 난시의 근시안인 남녀 대학생 20명(40안)을 대상으로 5가지 다른 방법(소프트렌즈 등가구면, 토릭 소프트 렌즈, RGP 렌즈, 난시교정 안경, 안경 등가구면)으로 교정하였다. 모든 대상자는 교정시력이 20/20(1.0) 이상이었다. 대비감도 검사와 눈부심 장애 검사는 OPTEC$^{(R)}$ 6500을 이용하여 밝은 조도과 어두운(글레어) 조도에서 실시하였다. 결과: 밝은 조도 하에서 난시교정 안경이 모든 공간주파수에서 가장 높은 대비감도를 나타내었고, 토릭 소프트 렌즈, RGP 렌즈, 안경 등가구면, 소프트 콘택트렌즈 등가구면 처방 순으로 대비감도가 낮아지는 것으로 나타났다. 그러나 모두 정상 범위의 대비감도 영역에 포함되었다. 어두운 조도(글레어) 하에서는 토릭 소프트 렌즈 착용자가 가장 높은 대비감도를 나타내었고, RGP렌즈, 안경 등가구면, 난시교정 안경, 소프트 렌즈 등가구면 처방 순으로 대비감도가 낮아지는 것으로 나타났다. 구면 소프트렌즈 착용자는 어두운 조도(글레어) 하에서 정상 영역보다 낮은 대비감도 값을 보였다. 결론: 약도의 근시성 난시안의 교정으로 토릭 소프트 렌즈 교정이 구면 소프트렌즈보다 좋은 시력의 질(대비감도)을 보인 것으로 나타났다. 어두운 조명에서 콘택트렌즈를 착용해야할 경우에는 토릭 소프트렌즈가 우수한 것으로 사료된다.

• 대한족부족관절학회지
• /
• 제9권1호
• /
• pp.74-80
• /
• 2005

Purpose: A retrospective review of the radiographs of the proximal metatarsal osteotomy and distal soft tissue procedure for hallux valgus, evaluating the correction of the tibial sesamoid, was undertaken. We evaluated the correlation between the reduction of the tibial sesamoid and the clinical outcomes. Materials and Methods: 17 patients (23 cases) with moderate to severe hallux valgus deformity underwent the proximal metatarsal osteotomy and distal soft tissue procedure. The preoperative and last follow-up radiographs were reviewed according to the tibial sesamoid grade classification recommended by the Research Committee of the American Orthopedic Foot and Ankle Society (AOFAS). We divided them into two groups according to the reduction of the tibial sesamoid. We anaylyzed the clinical outcomes in each group according to Mayo Clinic Forefoot Scoring System (FFSS). Results: In all of the patients, the preoperative tibial sesamoid position were grade 2 or greater. At the last follow-up, 52% (n=12) were grade 1 or less (Group I) and 48% (n=11) were grade 2 or greater (Group II). In group I, the forefoot score was improved from preoperative mean value of 32.0 points to final follow-up value of 66.3 points. In group II, the forefoot score was improved from preoperative mean value of 31.7 points to final follow-up value of 65.9 points. There was no statistical significance between postoperative, average scores in group I and II (p>0.05). Conclusion: The position of the tibial sesamoid was corrected insufficiently in almost half of all cases. In view of clinical outcomes, there was no significant difference between the corrected group and the other group.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.209-215
• /
• 2001

In view of the effects of the hardness of material on fatigue, rolling contact fatigue process in hard metals seems to differ from it in soft metals. This paper has been aimed to compare the rolling contact fatigue process according to the hardness of materials. Rolling contact fatigue tests using the ball bearings assembled with the inner race of four different hardness have been carried out. In addition, residual stress and half-value breadth on/below the inner raceway during individual rolling contact fatigue have been measured by X-ray diffraction. The results of this study showed that the change of residual stress and half-value breadth during the rolling contact fatigue on race way in hard metals is the same as in soft metals. However, plastic deformation by rolling contact in hard metals is in microscopic scale but only for soft metals in macroscopic scale.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.264-267
• /
• 2005

Soft magnetic iron powders have been coated with polyester or phenol resin. And the coated powder (soft magnetic composite) have been pressed into ring type core over the pressure of 870 MPa. Green density, magnetic flux density, permeability, core loss of the samples were measured to look at the effect of the coating materials and the amount of them. Green density is increased with the amount of coating materials and shows the maximum value, 6.5 $g/cm^3$ at 5 w/o, but decreased over it. And lowest value of the core loss is showed for the 5 w/o coated samples.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1065-1072
• /
• 2010

The excavation site in the new city of inchon songdo is distributed with soft reclaimed soil and marine deposit. So, the general ground anchor is not applied to this layer of soft ground as the earth retaining support system, because of settlement. And then, Jacket pack anchor which is newly developed in order to increasing the pullout resistance by certain grout bulb formation and expansion effect in soft ground is applied to this site instead of the general ground anchor. Though the maximum horizontal displacement shows about 30mm~100mm (The maximum horizontal displacement/excavation depth$\fallingdotseq$0.32~1.0%) according to excavation sequence, generally excavation work finished stably. Also, load cell after setting shows almost increasing trend with increasing horizontal displacement. It means that the settlement of Jacket pack anchor in soft ground is good. From the result of this case, we knew that Jacket pack anchor was able to use the earth retaining support system in soft ground. Using Jacket pack anchor in soft ground, The allowance of the horizontal displacement is applied more than general value considering soil factors.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 연약지반처리위원회 학술세미나
• /
• pp.70-77
• /
• 1999

Consolidation settlements on soft clay are often large and potentially damaging to structures. Currently, large-scale projects are in progress in Korea. These structures will be constructed on both thick and soft clay layers, and so the accurate evaluation of magnitude of settlement is required at every step in design and construction. Especially, secondary compression play an important role in consolidation settlements on soft clay. Generally, the magnitudes of secondary compression are evaluated by laboratory and in-situ consolidation tests or by empirical $C_{a/}$ $C_{c}$ relationships. The empirical $C_{a/}$ $C_{c}$ may not be only economical, but a fast and powerful tool in estimating secondary consolidation settlement. However, databases of the $C_{a/}$ $C_{c}$ relationship for sites in Korea are currently insufficient. The purpose of this study is to investigate the relationship of $C_{a/}$ $C_{c}$, on marine clay near the southern sea in Korea. In this study a series of incremental loading consolidation tests (measuring base pore water pressure) are performed. It was found that the $C_{a/}$ $C_{c}$ on undisturbed marine clay equaled 0.0397. This value is similar to the value proposed by Mesri and Castro(1987) for inorganic clay and silt. and silt. and silt.

• 한국잠사곤충학회지
• /
• 제29권2호
• /
• pp.67-72
• /
• 1987

견직물의 효소정련에 있어서 조련정도가 효소정련한 견직물의 특성에 미치는 영향을 구명하기 위하여 조련정도가 다른 효소정련견포에 대하여 KES-F System을 적용하여 역학적 특성 즉 인장, 굽힘, 약단, 압축 및 표면특성을 측정하고 태값을 산출하여 비교한 결과는 아래와 같다. 1. 능하부다이 견직물의 경우 조련연감율이 증가와 함께 포의 stiffness는 감소되고 smoothness는 향상되었으나 종합 태값인 soft feeling은 조련 20%에서 가장 우수하였다. 2. 크\ulcorner데신 견직물의 경우 anti-drape stiffness는 조련정도가 커지는데 따라서 증가되었으나 기타 특성과 종합 태값인 Flexibility with soft feeling은 조련정도와 상관이 인정되지 않았다.

• Geomechanics and Engineering
• /
• 제6권1호
• /
• pp.17-31
• /
• 2014

This paper investigates the development of failure surfaces induced by an embankment on soft marine clay deposits and the characteristics of such surfaces through numerical simulations and its comparative study with monitoring results. It is well known that the factor of safety of embankment slopes is closely related to the vertical loading, including the height of the embankment. That is, an increase in the embankment height reduces the factor of safety. However, few studies have examined the relationship between the lateral movement of soft soil beneath the embankment and the factor of safety. In addition, no study has investigated the distribution of the pore pressure coefficient B value along the failure surface. This paper conducts a continuum analysis using finite difference methods to characterize the development of failure surfaces during embankment construction on soft marine clay deposits. The results of the continuum analysis for failure surfaces, stress, displacement, and the factor of safety can be used for the management of embankment construction. In failure mechanism, it has been validated that a large shear displacement causes change of stress and pore pressure along the failure surface. In addition, the pore pressure coefficient B value decreases along the failure surface as the embankment height increases. This means that the rate of change in stress is higher than that in pore pressure.

• 한국잠사곤충학회지
• /
• 제28권2호
• /
• pp.52-60
• /
• 1986

견직물에 효소에 의한 정련처리를 비누-소다정련과 함께 실시한 후 이들 정련견포에 대하여 KES-F System을 적용하여 역학적 특성 즉 인장, 굽힘, 전단, 압축 및 표면특성을 측정하고 태값을 산출하여 효소정련과 비누-소다정련견포의 태값을 비교한 결과 1. 능하부다이 견직물의 경우 효소정련을 하면 포의 Stiffness가 비누-소다정련을 한 것에 비하여 감소되었고 Smoothness와 Soft feeling은 증가하였다. 2. 크\ulcorner데신 견직물의 경우 효소정련을 하면 비누-소다 정련에 비하여 Stiffness와 Anti-Drape Stiffness는 감소되었으며 Fullness와 종합 태값인 Flexibility with soft feeling은 향상되었다.