• 전력전자학회논문지
• /
• 제2권2호
• /
• pp.8-18
• /
• 1997

본 논문에서는 개선된 PWM 적용성, 저손실 특성 및 낮은 전압 스트레스를 가지는 새로운 저손실 준 병렬공진 직류-링크 인버터를 제안한다. 직류-링크 동작손실을 대폭 감소시킴은 물론 넓은 동작범위에 걸쳐 안정한 소프트 스위칭을 보장하기 위하여 프리휠링 구간을 최소화시키는 방법을 또한 제안한다. 게다가 직류-링크의 영전압 구간의 무손실 제어에 의하여 낮은 변조지수 동작에 있어서도 제안된 인버터는 개선된 PWM 적용성을 보인다. 제안된 인버더 토폴로지의 유용성을 확인하기 위하여 실험 및 시뮬레이션을 행하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권9호
• /
• pp.576-583
• /
• 2004

This paper presents a buck circuit topology of high-frequency with a single switching device. It solved the problem which arised from hard-switching in high-frequency using a resonant snubber and operating under the principle of ZCS turn-on and ZVS turn-off commutation schemes. In the existing circuit, it has the voltage stress that is almost twice of input voltage in a free-wheeling diode. In the proposed circuit, it has the voltage stress that is lower than input voltage with modifing a location of free -wheeling diode. In this paper, it expained the circuit operation of each mode and analyzed feedback-loop stabilization. Also it confirmed the waveform of each mode with simulation result. The experiment result verified the simulation waveform and compared the voltage stress of a free -wheeling diode in the exsiting circuit with the voltage stress of that in the proposed circuit. Moreover, it compares and analyzes the proposed circuit's efficiency with the hard-switching circuit's efficiency according to the change of load current.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.332-342
• /
• 2018

This paper proposes a parameter design method for multi-element resonant converters (MERCs) with a unique resonant zero point (RZP). This method is mainly composed of four steps. These steps include program filtration, loss comparison, 3D figure fine-tuning and priority compromise. It features easy implementation, effectiveness and universal applicability for almost all of the existing RZP-MERCs. Meanwhile, other design methods are always exclusive for a specific topology. In addition, a novel dual-CTL converter is also proposed here. It belongs to the RZP-MERC family and is designed in detail to explain the process of parameter selection. The performance of the proposed method is verified experimentally on a 500W prototype. The obtained results indicate that with the selected parameters, an extensive dc voltage gain is obtained. It also possesses over-current protection and minimal switching loss. The designed converter achieves high efficiencies among wide load ranges, and the peak efficiency reaches 96.9%.

• ETRI Journal
• /
• 제39권2호
• /
• pp.292-299
• /
• 2017

We propose pulse-mode dynamic $R_on$ measurement as a method for analyzing the effect of stress on large-scale high-power AlGaN/GaN HFETs. The measurements were carried out under the soft-switching condition (zero-voltage switching) and aimed to minimize the self-heating problem that exists with the conventional hard-switching measurement. The dynamic $R_on$ of the fabricated AlGaN/GaN MIS-HFETs was measured under different stabilization time conditions. To do so, the drain-gate bias is set to zero after applying the off-state stress. As the stabilization time increased from $ 0.1{\mu}s$ to 100 ms, the dynamic $R_on$ decreased from $160\Omega$ to $2\Omega$. This method will be useful in developing high-performance GaN power FETs suitable for use in high-efficiency converter/inverter topology design.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.135-141
• /
• 2004

전기 에너지를 이용한 살균장치는 화학적인 과정이 없으며, 2차적인 환경 오염도 발생시키지 않는 장점을 가지고 있다. 또한 전력변환회로에는 영전류 스위칭과 영전압 스위칭을 사용한 소프트 스위칭 토폴로지에 의하여 스위칭 손실을 감소시키고, 장치의 크기를 소형화시킬 수 있는 장점이 있다. 제안한 전원장치는 기존의 장치들보다 출력전류가 매우 적어 전원 시스템으로 제작할 경우 소형화가 가능하며 가격이 저감될 수 있다. 따라서 이 전원 장치는 전력 소비가 적고 전력 변환이 급격한 곳에 적합하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.263-266
• /
• 2002

In this paper, It is indicating that an issues of the conventional boost converter for high frequency induction heating. To improve those issues, it is proposed, simulated and analyzed that the current resonant circuit, simulated. As the result, we knew that the proposed circuit has a good point to improve the waveform of input current and to make high efficiency. On the other side, in the inverter for the high current power supply, it is proposed that the high frequency inverter of the half bridge topology, be done the circuit analysis to extract the optimal circuit parameter. It is making sure of the soft switching operating by the inductor to reverse parallel connected on the inverter main switch, decreasing the surge voltage when the switch is turn-off by compulsion, and repressing the switch current and bringing the high current amplitude operation by the multi resonance.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.34-39
• /
• 2010

We developed a path algorithm for ultrafast/wide area laser processing. Demands for high precision laser processing with a wide area has been increasing for a number of applications such as in solar cell battery, display parts, electronic component and automobile industry. Expansion of the area in which laser processing is an important factor to handle the ultrafast/wide area processing, it will require a processing path. Processing path is path of 2- axis stage and stage of change in velocity can be smooth as possible. In this paper, we proposed a smoothingnurbs method of improved speed profile. This method creates soft path from edge part, it is main purpose that scan area ($50mm{\times}50mm$) inside processing path makes path of topology of possible straight line. We developed a simulation tool using Visual C++.

• 인터넷정보학회논문지
• /
• 제9권1호
• /
• pp.9-19
• /
• 2008

이 논문은 인터넷으로 중첩 NEMO 네트워크가 연결될 때 최적화가 요구되는 두 가지 연결성을 고려하고 있다. 하나는 인터넷과 중첩 NEMO 네트워크 사이의 연결이고, 다른 하나는 중첩 NEMO 네트워크 내부의 MR간의 연결성이다. 이러한 연결성은 IPv6에 기반하고 있으며, 중첩 NEMO 네트워크는 NEMO를 인식하는 AR(Access Router)에 의해 구성될 수 있다. 특히 이 논문은 중첩 NEMO의 토폴로지 특성을 나타내는 트리 기반한 토폴로지 정보를 포함하고, 트리 구조를 가지는 주소 체계를 제안한다. 이 제안은 기존에 대표적인 RO(Route Optimization) 제안들과 비교할 때, MR 홈 네트워크로의 BU(Binding Update) 성능은 가장 효율적인 접근과 비슷하였고, 내부라우팅 효율은 가장 효율적으로 나타났다.

• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.14-20
• /
• 2012

This paper presents a design and topology selection of bi-direcional buck converter based on PV PCS for managing the electric power. Futhermore, Current Ringing on DCM bi-directional buck converter for soft switching is analyzed in detail. PSIM Simulation and Experiments at the various operating points show the propriety of this paper. Building on the result of simulation and experiment, a comparative analysis is performed with the approximate estimate. By use of a study, the selecion of switch and diode which improve efficiency of the overall system is appiled to DCM bi-directional buck converter based on PV PCS.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.532-538
• /
• 2000

A double rectangular spiral inductor is fabricated using FeTaN films. The inductor is composed of internal coils sandwiched by magnetic layers. Characteristics of inductor performance are investigated with an emphasis on planarization of magnetic films. In the absence of the planarization process, the grating topology of upper magnetic films over coil arrays degrades the soft magnetic properties and the inductor performance. It also induces a longitudinal magnetic anisotropy with the easy axis aligned to the magnetic flux direction. This alignment prevents the upper magnetic films from contributing to the total induction. Glass bonding is a viable method for achieving a completely planar inductor structure. The planar inductor with glass bonding shows excellent performance : inductance of 1.1 H, Q factor of 7 (at 5 MHz), and the dc current capability up to 100 mA.