• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.284-290
• /
• 2020

Energetic thermoplastic elastomers (ETPEs) based on glycidyl azide polymer (GAP) and carboxylated GA copolymers [GAP-ETPE and poly(GA-carboxylate)-ETPEs] were synthesized using isophorone diisocyanate (IPDI), dibutyltin dilaurate (DBTDL), 1,4-butanediol (1,4-BD), and soft segment oligomers such as GAP and poly(GA-carboxylate). The synthesized GAP-ETPE and poly(GA-carboxylate)-ETPEs were characterized by Fourier transform infrared (FT-IR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), universal testing machine (UTM), calorimetry and sensitivity towards friction and impact. DSC and TGA results showed that the introduction of carboxylate group in GAP helped to have better thermal properties. Glass transition temperatures of poly(GA-carboxylate)-ETPEs decreased from -31 ℃ to -33 ℃ compared to that of GAP-ETPE (-29 ℃). The first thermal decomposition temperature in poly(GA_0.8-octanoate_0.2)-ETPE (242 ℃) increased in comparison to that of GAP-ETPE (227 ℃). Furthermore, from calorimetry data, poly(GA-carboxylate)-ETPEs exhibited negative formation enthalpies (-6.94 and -7.21 kJ/g) and higher heats of combustion (46713 and 46587 kJ/mol) compared to that of GAP-ETPE (42,262 kJ/mol). Overall, poly(GA-carboxylate)-ETPEs could be good candidates for a polymeric binder in solid propellant due to better energetic, mechanical and thermal properties in comparison to those of GAP-ETPE. Such properties are beneficial to application and processing of ETPE.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1225-1234
• /
• 2009

As the Wenchuan Earthquake was of high magnitude and shallow seismic focus, it caused great damage and serious geo-hazards. By the field investigation and remote-sensing interpretation after the earthquake and by using means of GIS, the distribution of geo-hazards triggered by the earthquake was analyzed and the conclusions are as follows: (1) the earthquake geo-hazards showed the feature of zonal distribution along the earthquake fault zone and linear distribution along the rivers; (2) the distribution of earthquake geo-hazards had a marked hanging wall effect, for the development density of geo-hazards in the hanging wall of earthquake fault was obviously higher than that in the foot wall and the width of strong development zone in the hanging wall was about 10 km; (3) the topographical slope was a main factor which controlled the development of earthquake geo-hazards and a vast majority of geo-hazards were distributed on the slopes of 20 to 50 degrees; (4) the earthquake geo-hazards had a corresponding relationship with the elevation and micro-landform, for most hazards happened in the river valleys and canyon sections below the elevation of 1500 to 2000 m, particularly in the upper segment of canyon sections (namely, the turning point from the dale to the canyon). Thin ridge, isolated or full-face space mountains were most sensitive to the seismic wave, and had a striking amplifying effect. In these areas, collapses and landslides were most likely to develop; (5) the study also showed that different lithologies determined the types of geo-hazards, and usually, landslides occurred in soft rocks, while collapses occurred in hard rocks.

• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.289-298
• /
• 2015

Objective: To evaluate and compare the effects of two appliances on the en masse retraction of the anterior teeth anchored by temporary skeletal anchorage devices (TSADs). Methods: The sample comprised 46 nongrowing hyperdivergent adult patients who planned to undergo upper first premolar extraction using lingual retractors. They were divided into three groups, based on the lingual appliance used: the C-lingual retractor (CLR) group (group 1, n = 16) and two antero-posterior lingual retractor (APLR) groups (n = 30, groups 2 and 3). The APLR group was divided by the posterior tube angulation; posterior tube parallel to the occlusal plane (group 2, n = 15) and distally tipped tube (group 3, n = 15). A retrospective clinical investigation of the skeletal, dental, and soft tissue relationships was performed using lateral cephalometric radiographs obtained pretreatment and post en masse retraction of the anterior teeth. Results: All groups achieved significant incisor and canine retraction. The upper posterior teeth did not drift significantly during the retraction period. The APLR group had less angulation change in the anterior dentition, compared to the CLR group. By changing the tube angulation in the APLR, the intrusive force significantly increased in the distally tipped tube of group 3 patients and remarkably reduced the occlusal plane angle. Conclusions: Compared to the CLR, the APLR provides better anterior torque control and canine tipping while achieving bodily translation. Furthermore, changing the tube angulation will affect the amount of incisor intrusion, even in patients with similar palatal vault depth, without the need for additional TSADs.

• Korean Journal of Cleft Lip And Palate
• /
• v.12 no.1
• /
• pp.21-32
• /
• 2009

Generally, an adult cleft lip or/and palate patient shows some amount of maxillary deficiency due to limitation of bony growth caused by heavy scars resulted from previous operations such as a cheiloplasty and/or a palatoplasty at an early child age. To solve the problem, advancement of the maxilla is usually required during orthognathic surgery. However, severe tensional force resulted from heavy scars on the palate and/or the lip, as well as the bony defect at the cleft area limited sufficient advancement of the maxillary segment and finally caused relapse of the reposed maxilla. Therefore, distraction osteogenesis of the maxilla was introduced for the successful maxillary advancement inthose kinds of patients. As both hard and soft tissues can be simultaneously and gradually extended with this technique, tensional force caused by heavy scars opposed to forward movement of the maxilla can be reduced to an extent not to develop severe relapse of the advanced maxilla. Since distraction osteogenesis of the maxilla was applied as one of standard protocols for the treatment of the patients with severe maxillary hypoplasia dueto cleft lip and/or palate, the devices for the distraction was improved to control the vectors of distraction with better and more stable. We have treated a 23-year-old male cleft patient with a severe maxillary hypoplasia using a newly developed a maxillary distraction device and a RP model for a pre-operative simulation surgery. As a result, we could successfully move the maxilla as we designed pre-operatively and also reduce much of operation time. Therefore, we report of the case to share our experience with colleagues.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.274-278
• /
• 2005

Purpose : Prediction for soft tissue change after orthognathic surgery is very important for the final esthetics. In this study, we have tried to get the amount of upper lip movement relative to bony segment movement after anterior segmental osteotomy by cephalmetric analysis to predict final upper lip position after surgery. Material and Methods : 20 patients was studied on whom anterior segmental osteotmy as performed by Cupar method during the years 2002 to 2003. Cephalometric radiograph were taken at 1month before surgery and 6 month after surgery. Change of upper lip was measured on landmark Ls and Sto relative to hard tissue (landmark Ia) setback on these X-rays and analyzed. Results : 1. Upper lip setback movement. Setback of upper lip showed proportional relation to the hard tissue setback and the ratio was about 84%(p=0.001). 2. Upper lip downward movement. Downward movement of upper lip showed no proportional relation to hard tissue setback And the amount was mean 1.38 mm and SD 1.21mm (p=0.922). Conclusion : The posterior movement of upper lip is affected by hard tissue movement and shows good proportional change whereas downward movement is not so much influenced by hard tissue movement. And we think slight downward movement shown in this study could be explained by the V-Y closure performed during surgery.

• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.297-316
• /
• 2015

The use of fragility curves in the design of bridges is becoming common these days. In this study, experimental data have been used to develop fragility curves for the potential of girder unseating of a three-segment bridge and a bridge-abutment system including the influence of spatially varying ground motions, pounding, and abutment movement. The ground excitations were simulated based on the design spectra for different soil conditions. The Newmarket Viaduct replacement bridge in Auckland was used as the prototype bridge. These fragility curves were also applied to the 2010 Darfield and 2011 Christchurch earthquakes. The study showed that for bridges with similar characteristics as the chosen prototype and with similar fundamental frequencies, pounding could increase the probability of girder unseating by up to 35% and 30% based on the AASHTO and NZTA seating length requirements, respectively. The assumption of uniform ground excitations in many design practices, such as the NZTA requirements, could potentially be disastrous as girders might have a very good chance of unseating (as much as 53% higher chances when considering spatial variation of ground motions) even when they are designed not to. In the case of superstructures with dissimilar frequencies, the assumption of fixed abutments could significantly overestimate the girder unseating potential when pounding was ignored and underestimate the chances when pounding was considered. Bridges subjected to spatially varying ground excitations simulated based on the New Zealand design spectra for soft soil conditions with weak correlation shows the highest chances of girders falling off, of up to 65% greater than for shallow soil excitations.

• Archives of Craniofacial Surgery
• /
• v.19 no.4
• /
• pp.304-308
• /
• 2018

Replantation using microvascular anastomosis is considered to be the optimal method in treating the amputated ear in terms of resulting color, texture, and shape. Only a few cases of ear replantation have been reported because it is anatomically difficult to identify suitable vessels for anastomosis. We successfully replanted the amputated helical rim of the ear using single arterial anastomosis. A 37-year-old man had his helical rim amputated by a human bite. The amputee was about $4{\times}1cm$ in dimension, composed of skin and soft tissue including auricular cartilage. Replantation was performed anastomosing a small artery of the amputee with a terminal branch of the posterior auricular artery. After replantation, intravenous heparinization was performed and prostaglandin E1 and aspirin were administered. Venous congestion was decompressed by stab incisions applied with heparin solution soaked gauze. Venous congestion of the amputee slowly began to resolve at 4 days after the operation. The amputated segment of the helical rim survived completely with good aesthetic shape and color. The authors propose that performing microvascular anastomosis should be attempted especially if it is possible to detect vessels on cut surfaces of ear amputee and stump. Proper postoperative care for venous congestion, arterial insufficiency, and infection should be followed for amputee survival.

• Journal of Veterinary Clinics
• /
• v.40 no.4
• /
• pp.283-287
• /
• 2023

A 10-year-old spayed female beagle dog presented with a 2-month history of third-eyelid elevation in the left eye (OS). Ophthalmic examination revealed slightly diminished corneal and palpebral reflexes along with exophthalmos in the OS. Schirmer's tear test and intraocular pressure values were within the normal range for the OS. Slit-lamp biomicroscopy revealed protrusion of the third eyelid and corneal opacity in the OS. Fundoscopy revealed a prominent black mass in the OS covering the optic nerve. Tapetal hyper-reflectivity was also observed around the mass. Ocular ultrasonography showed a 0.74 × 0.67 cm echogenic posterior segment mass around the optic nerve protruding into the retrobulbar space. Computed tomography revealed a contrast-enhanced soft tissue lesion in the posteromedial aspect of the left eyeball protruding into the retrobulbar region, and the optic nerve was suspected to be involved. No evidence of osteolytic changes in the adjacent bone or distant metastasis was observed. Enucleation was performed to prevent potential metastasis or local invasion of the mass and to relieve discomfort due to exposure to keratopathy resulting from lagophthalmos. Histopathological examination revealed a central choroidal melanocytoma extending into the optic nerve. No local recurrence was detected until 16 months postoperatively.

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.235-245
• /
• 2003

The goal of the present study was to evaluate the effects of PNAM appliance and cheiloplasty on alveolar molding. Samples consisted of 16 unilateral cleft lip and palate infants (10 males and 6 female, mean age=37.0 days after birth, average alveolar cleft gap=10.46m), who were treated with PNAM appliances by one orthodontist and rotation- advancement cheiloplasty by one surgeon in Seoul National University Hospital. Average duration of alveolar molding treatment was 13.10 weeks and these patients were recalled at average 8.31 weeks after cheiloplasty. These patients' models were obtained at initial visit (T0, mean age : $37.0\pm27.89$ days after birth), after successful alveolar molding (T1, mean age : $119.25\pm40.18$ days after birth), and after cheilopasty (T2, mean age : $190.81\pm42.78$ days after birth). Seven linear and five angular variables were measured using 1 : 1 photometry and soft ware program(V-ceph. Cybermed. Seoul, Korea). Paired t-test was performed to investigate statistical significance at p<0.05 level. 1 The posterior parts of alveolar segments were the stable structures during alveolar molding treatment period and after cheiloplasty in infants. 2. The closure of cleft gap during alveolar molding was usually due to backward bending of the whole part of the greater segment. 3. Although forward growth of the greater segment was hindered by alveolar molding, it resumed after cheiloplasty. 4. Increase of anterior inter-segment angle after cheiloplasty was due to the molding effect of the lip scar pressure.