• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.10-19
• /
• 1992

Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.1
• /
• pp.32-38
• /
• 1997

PURPOSE : For the reconstruction of large bone defect after tumor resection, it is possible to reuse the bone involved by tumor with some treatment to it. Several bone-reusing methods have been reported such as autoclaving, low-heat treatment(pasteurization) and intraoperative radiotherapy. We have used extracorporeally radiated autogenous bone graft for reconstruction after tumor resection, and analyzed the periods for junctional union, functional results and complications to know the indications of this method. METHODS : From Dec. 1993 to Sept. 1995, nine patients had taken autogenous bone graft with extracorporeal irradiation. Eight cases were osteosarcoma and 1 giant cell tumor. The graft sites were 5 in femur, 3 proximal tibia and 1 femur and tibia. Stage 3 was 1 case(GCT), Stage IIB 3 and Stage IIIB 5. After wide resection, surrounding soft tissue and intramedullary and extramedullary portion of the tumor were removed. Radiation was done in 5000cGy to the resected bone. Ender nails and bone cement were inserted and filled into the medulla to prevent fracture. RESULTS : Average follow-up period was 12.3(4 to 21) months. Average junctional union period in simple X-ray was 6.5 months in 4 cases. Average functional score following Enneking's criteria was 19(12-27). Complications were as follows ; condylar fractures and femur neck fracture in 4 cases, subluxation of the knee joint 3 and infection 1. Although local recurrence was detected in 1 case, the site of recurrence was not in the radiated bone but surrounding soft tissue. At final follow-up, no recurrence was found in one case(GCT), CDF 2, AWD 2, DOD 3, and died of chemotherapy related sepsis 1. CONCLUSIONS : Extracorporeally radiated bone autograft is considered to be a method for reconstruction of the large bone defect made by tumor resection, especially in the reconstruction around the joint.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.237-243
• /
• 2007

Phantoms are very necessary for quality assurance of radio nuclides imaging systems to maintain standards and to ensure reproducibility of test. General quality assurance and instrument quality control are essential in every hospital. The human tissue equivalent materials are aluminum, areryl, water and epoxy..etc. It is very important to select optimum equivalant materials for a phantoms in QC. Especially, paraffin is very similar with human soft tissue in X or Gamma-ray physical characteristics and easy to buy with economically. We made a paraffin thyroid phantom and compare with thyroid areryl phantom, also used commercially in practice. Two small size cold spots(3 and 6 mm diameter) and a hot spot(3 mm diameter) embeded in paraffin phantom. And imaged with $^{99m}TcO_4$ by camera for analysis about spatial resolution and noise at the hot and cold spots. We got some results as below : 1. No difference in counting rate and noise between both arcryl and paraffin thyroid phantoms. 2. The best spatial resolution can be seen 6 cm distance between pinhole collimator and thyroid phantoms(arcryl and paraffin). 3. More optimal spatial resolution could acquired in paraffin thyroid phantom. Paraffin is very similar with human soft tissue in atomic number, density and relative absorbtion function, and can be shaped easily what we wanted. So we can recommendation paraffin as quality assurance phantom because its usefulness, economical benefit and purchasability.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.1
• /
• pp.56-65
• /
• 2002

A pulmonary epithelioid hemangioendothelioma (PEH) is a rare tumor with a vascular origin. A PEH can arise in many organ systems, such as the lung, liver, bone and soft tissues. It is a borderline malignancy but the clinical course is usually benign. In this report, we describe three cases of PEH. Case 1, a 61-year-old man, had nonspecific chest discomfort and the chest X-ray showed a solitary lung nodule. This nodule was diagnosed by an open lung biopsy. The pathologic findings including abundant necrosis, mitosis and hyperchromatic and pleomorphic nuclei, indicated a malignancy. The electron microscopic study showed Weibel-Palade bodies and the immunohistochemical stain for CD31 showed a positive reaction in the tumor cells, and linear staining along the vascular lumina. Case 2, a 34-year-old man, was admitted for an evaluation of multiple small nodules, incidentally detected a screening chest X-ray. The nodules were diagnosed by a immunohistochemical stain for the factor VIII-related antigen. Case 3, a 34-year-old woman, complained of left pleuritic chest pain. A simple chest film and the chest CT scan revealed multiple bilateral nodules and a left pleural effusion. An immunohistochemical stain for the factor VIII-related antigen was used to diagnose the nodules. Forth-one months after the diagnosis, she died of pulmonary insufficiency.

• Archives of Reconstructive Microsurgery
• /
• v.9 no.2
• /
• pp.120-126
• /
• 2000

Microsurgical reconstruction of the hand demands recovery of the sensation of the reconstructed free flap as well as microsurgeon's intelligence, technique and experience. Even with adequate soft tissue coverage and skeletal mobility, an insensate hand is prone to further injury and is unlikely to be useful to the patients. Authors have performed 8 cases of neurosensory free flaps in the hand, 4 cases of wrap around, 3 dorsalis pedis and 1 lateral arm flap, from July 1992 through June 1999 and followed up average 4 years and 4 months. Wrap around flap was performed for reconstruction of 4 cases of thumb, repairing deep peroneal nerve and superficial radial nerve by epineurial neurorrhaphy, and followed up for average 3 years and 10 months and calculated 9mm in the static 2 point discrimination test. Dorsalis pedis flap were 3 cases for reconstruction of the ray amputation, extensor tendon exposure and wrist exposure. Deep peroneal nerve and branch of the ulnar nerve was repaired by epineurial neurorrhaphy calculating 6mm and superficial peroneal nerve and superficial radial nerve averaging 18mm in the static 2 point discrimination test for follow up average 2 years and 9 months. Lateral arm flap was 1 case for reconstruction of the ray amputation in the hand repairing posterior cutaneous nerve to the arm to the superficial radial nerve calculating 20mm for follow up 6 years and 8 months.

• Journal of Chest Surgery
• /
• v.12 no.4
• /
• pp.324-335
• /
• 1979

During the period of 4 years from August 1975 to August 1979 one hundred and forty seven cases of lung cancer were seen at Paik Foundation Hospital in Seoul, Korea. Among these 147 cases, 104 patients had primary carcinoma of the lung and the remainder was metastatic carcinoma to the lung. Among these 104 primary carcinoma patients, 73 cases were proven histologically as primary carcinoma of the lung. There were three cases of alveolar cell carcinoma [Table 1 ]. This clinical observation is based on those 73 cases including three case reports of the alveolar cell carcinoma. 1. Peak incidence was observed in the 5th decade of life. Male to female ratio was 2 to 1 [Fig. 1]. 2. Pathological classifications were as follows: epidermoid carcinoma, 24 cases [32.9%]; undifferentiated carcinoma, 20 cases [27.4%]; adenocarcinoma, 15 cases [20.5%]; bronchioloalveolar carcinoma [5.5%] and positive cytology, 10 cases [13.7%] [Fig. 2]. 3. Evidence of inoperability was observed in 55 patients [75% of the 73 cases] [Table 3]. 4. Among those 73 cases, operability was evaluated in 18 patients or 25%. One patient refused operation and 17 patients [23.6%] were explored. In 11 [15%] out of 17 patients, thoracotomies were performed. Six cases were pneumonectomies and 5 cases were lobectomies or bilobectomies [Fig. 3]. 5. First case of alveolar cell carcinoma was a 46 year-old housewife complaining of cough and hemoptysis for one year. The plain chest X-ray and bronchogram showed characteristic pictures as Figures 4 and 5. A pneumonectomy was carried out. Histologically, a beautiful alveolar carcinoma consisted of the characteristic tall columnar epithelial cells, which were lining the alveolar spaces as seen in Figures 6, 7, 8, and 20. 6. In the second case of 41 year old male, predominant clinical feature was single, well defined mass in the right lower lobe [Fig. 10 and 11] on chest X-ray. Bilobectomized specimen showed fragile, soft and hard tissue containing mucoid secretions and focal yellowish necrosis with pigmentation on cut surface [Fig. 12]. Slides showed tumor cells lined up along the alveolar septa with papillary projections [Fig. 13 and 14]. 7. Third case of alveolar cell carcinoma was a 50-year-old housewife with hemoptysis. An outstanding clinical picture was a round to lobulated mass in the right upper lobe [Fig. 16]. She is living now, 2 years and 1 month post-operatively, but has arrived at terminal stage with military nodular disseminations to the contralateral lung [Fig. 19].

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.105-108
• /
• 2011

Extra-skeletal chondroma, characterized by its lack of connection with the adjacent bone, includes synovial chondromatosis, intra-articular and para-articular chondroma, and soft tissue chondroma. Among them, the last two lesions are extremely rare. This is the case about 20-year-old soldier, who had complained of tenderness of the knee, pain and fullness during knee flexion and limitation of motion after a hard military training. We found a mass in the x-ray and MRI and resect the mass surgically, which was a $5.5{\times}4{\times}3$ cm size hard solitary mass. On microscopic finding, it was consisted of lobulated hyaline cartilage and outer fibrous capsule, and we ascertained it as para-articular chondroma. We experienced a case of para-articular chondroma in the infrapatellar fat pad of the knee joint and present its clinical, radiologic and pathologic findings with literature review.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.531-537
• /
• 2009

Purpose: Alveolar bone grafting has become an essential process in the treatmemt of alveolar cleft patient for stabilization of the maxillary arch, elimination of oronasal fistula, the reconstruction of the soft tissue nasal base support, and creation of bony support for tooth eruption for implant. The use of Autologous iliac cancellous bone is preferable because of the adequate quantity and high osteoinductive potential. However, even with iliac bone, insufficient osteoregeneration and absorption occur due to several factors such as the patient's age, cleft width, functional stress, and others. In order to increase osteoregeneration where the iliac bone is placed, the present study is associated with bone marrow aspirate (BMA). The experimental study evaluated the efficacy of osteoregeneration in normal cleft rabbits when alveolar bone grafting was performed with autologous iliac corticocancellous bone. Methods: Twenty - four New Zealand White rabbits were divided randomly into 2 groups (BMA, control). All animals underwent harvesting of corticocancellous bone graft from the right posterior iliac crest via standard surgical technique. $1m{\ell}$ of BMA were obtained by scraping the needle and aspirate with $10m{\ell}$ syringe from the contralateral iliac bone wall. The muco - periosteal flap on the palate was elevated. A mixture of Equal bone's volumes with BMA and saline as its control was inserted into the cleft. Animals were sacrificed at 2, 4, and 8 weeks and maxilla was harvested for dental peri - apical X-ray, bone matrix density (BMD),and histologic analysis. Result: BMD of regenerated bone to the cleft in the rabbits was higher than that of the control rabbits. X-ray, histologic analysis showed that increased osteoregeneration and low absorption rate were observed in the BMA group. Conclusion: Our experimental study showed BMA enhanced the osteoregeneration and survival rate of alveolar bone grafting. BMA is easy to extract & cost - time effective. So it can be an effective enhancers for bone grafting mixtures.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.350-356
• /
• 1998

$Y_{3-x}La_xFe_5O_{12}$ (x=0.0, 0.25, 0.5, 0.75, 1.0) powders and thin films were fabricated by a sol-gel method and their magnetic properties and crystal structure were investigated by using X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), and Mossbauer spectroscopy. XRD and Mossbauer spectroscopy measurements show that garnet powders annealed at 900 $^{\circ}C$ for 8 hours were single-phased and that thin films fired at 800 $^{\circ}C$ for 2 hours were crystallized without any preferred direction. X-ray diffraction patterns of $Y_{3-x}La_xFe_5O_{12}$ powders annealed at 1000 $^{\circ}C$ had only peaks of the garnet structure in case of x$\leq$0.75 but those of $Y_2LaFe_5O_{12}$ powders consisted of peaks from garnets and $LaFeO_3$. Mossbauer sepectra of garnet powders grown by the sol-gel method had a similar shape of those of powders grown by a conventional ceramic method. Grain sizes of garnet powders were 200~300 nm and the averaged surface roughness was 3.17 nm. Results of VSM measurements show the powders and thin films had soft magnetic properties and that the garnet powders had the largest saturation magnetization, 30 emu/g, and the lowest coercivity, 52 Oe.