• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1042-1050
• /
• 2008

In this study, SCP method was used by purpose to improve loose sand and soft clay that is drilled Sand Compaction Pile in underground. Settlement behavior of field analyzed through SCP method. When sand Compaction Pile drilled in clay, forming composite ground that foundation and Sand Compaction Pile behavior. According to SCP method can expect bearing capacity improvement, Settlement reduction, lateral flow protection. SCP increase the consolidation settlement of ground and it reduce settlement for that purpose increase liquefaction resistance, lateral Resistance. Because SCP had been widely used for sand. Area of Inchon-A by sand compose clay and silt to upper Ground and compose soft clay to under ground. After pre-loading, it measured settlement by extensometer and settlement extensometer that purpose of ground improvement with 13% in replacement ratio. The result analyzed settlement behavior is similar to Multi-layered Ground that it happened to elastic settlement at upper ground and to consolidation settlement at under ground.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.232-239
• /
• 2005

Recently geosynthetics that can be constructed on soft ground have been used for reinforcement and separation in various ways. Through laboratory model tests and numerical analysis, in this study, estimated the suitability of cable elements and appropriate input factors considering loading effect in modeling of geosynthetics. First, in laboratory model tests, geosynthetics were constructed on the clay, and covered with the thickness, 7.5cm of sand mat. And then static and dynamic model tests were performed measuring loading, settlement, ground lateral displacement, and displacements of geosynthetics, but, for cyclic loading, bearing capacity increased linearly with stiff slop because cyclic loading with constant cyclic pressure compacted the ground. Numerical analysis were performed with FLAC 4.0 2D using Mohr-Coulomb and Modified Cam-Clay models, and they compared with the results of model tests. Cable elements of FLAC in modeling geosynthetics couldn't consider the characteristics of geosynthetics that increase shear strength between geosynthetics and clay according to the loading increase. Therefore, in this study, appropriate equation that can consider loading effects in Cable elements was proposed by Case Study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.701-708
• /
• 2003

Recently, piezocone penetration test is frequently conformed in order to estimate the characteristics of soft ground with standard penetration test, generally used in the past. The soil characteristics, such as cone penetration resistance, friction resistence and excessive pore water pressure, can be evaluated continuously through the piezocone penetration test. In Incheon International Airport 2nd phase site preparation, standard penetration test and piezocone penetration test were used in order to increase the confidence for determination of soft ground depth. And the compressible layer was determined by the comparison between the preconsolidation pressure and the designed increase pressure. As the results, the relation between standard penetration test and piezocone penetration test shows q$_{c}$=(1.09~l.63)N at the soft ground, determined by 5/30 N value. And q$_{c}$=(1.21~l.98)N was shown at the point of compressible layer, evaluated by the preconsolidation pressure. These results were applied to determination for the depth of soft ground and to design the improvement for the soft clay.lay.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.586-597
• /
• 2022

본 연구에서는 국내 주요 연약지반으로 알려진 낙동강 조간대 지역의 압밀침하 취약성 평가에 활용할 상부 점성토층의 위치별 두께 정보를 추정할 수 있는 모델을 개발하였다. 두께정보 추정을 위하여 기계학습 알고리즘인 RF (Random Forest), SVR (Support Vector Regression), GPR (Gaussian Process Regression)과 지구통계기법인 정규크리깅(Ordinary Kriging)을 이용한 4가지 공간추정 모델을 개발하고 상호 비교하였다. 모델 개발을 위하여 수집한 연구지역의 시추공 자료 4,712개 중 상부점성토층이 존재하는 2,948개의 시추공 자료를 사용하였으며, 개발된 모델들의 성능을 정량적으로 평가하기 위하여 피어슨(Pearson) 상관계수와 오차제곱평균(mean squared error)을 사용하였다. 또한, 정성적 평가를 위하여 연구지역 전역에 상부점성토층의 두께를 추정하여 점성토층의 지역별 분포 특성을 상호 비교하였다.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.195-205
• /
• 2013

본 연구는 압밀과정을 고려하기 위해 MCC(Modified Cam-Clay) 모델을 사용하여 연약지반 상의 교대 및 기초파일의 측방이동량 및 측방이동이 영향을 미치지 않는 범위를 산정하였다. 연구를 위하여 연약점토층의 점착력과 내부마찰각, 연약점토층의 깊이, 성토높이, 압밀 정수, 교대에서 성토부까지의 이격거리를 바꾸어서 유한요소해석을 실시하였다. 교대의 수평변위는 이격거리가 멀수록 직선적으로 변화하는 양상을 보이다가 교대에 근접하여 성토가 이루어지면 지수적인 형태로 변화하였다. 연약점토층의 깊이가 10 m 깊어짐에 따라 수평변위는 1.5~3.0배로 증가하는 경향이 나타났으며, 점착력이 10 $kN/m^2$ 증가하는 경우와 내부마찰각이 $5^{\circ}$ 증가하는 경우에 있어 교대의 수평변위는 0.3~0.95 정도의 비율로 감소하였다. 측방이동량의 변화비는 교대 이격거리가 먼 경우는 교대에 가까워질수록 증가하고, 이격거리가 가까운 경우는 수평변위의 변화비는 비슷한 형태로 증가하지만 전체적으로 감소하는 경향이 나타났다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.423-428
• /
• 2005

If the load of constructing vehicles during the construction work acts on the road or the ground surface on the soft ground, due to the excess stresses in soils the trafficability of the vehicles influences the constructing efficiency, constructing period and so on. Stress distribution in soils is the very important element to design and to solve the problems of settlement, safety of foundations and trafficability of constructing vehicle in civil engineering. This research represents the comparative estimation of the actual and theoretical measurement on the underground stress of outer layer for each soil after the observation of each top soil layer for its vertical and horizontal stress in (1)homogeneous sand ground (2) weak stratum with the sand soil (3) weak stratum with gravel of the soil model, and it also investigates the effect of subsidence of ground by the repeated load. The underground stress turn out to be different in the value of theoretical and actual measurement after the trial examination of model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.365-372
• /
• 1999

The plane deformation and spatial seepage(PDSS) analysis was developed to consider 3D flow of excess pore water as well as plane deformation of ground. Here is newly developed an equivalent model for PDSS analysis, which was the purpose to reduce number of finite elements and to take the effects of smear and well resistance into consideration. As the result of PDSS analysis with applying the new model, it is showed that the settlement-tin e relationship by PDSS agrees well with those of Plane strain(PS) and axisymmetric analyses, irrespective of existence of untreated layer. And the excess pore pressure distribution by PDSS is relatively agreed with that of axisymmetric analysis, not with that of PS.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.20-25
• /
• 2004

For the structural foundation above the soft clay layer conditions, the design charts are first presented for the evaluation of both bearing capacity and total settlement in the basic raft foundation system. wad settlement relationship curves are used to evaluate the ultimate soil bearing capacity. The total settlement is evaluated by applying various traditional factors into the ultimate bearing capacity. Then, the parametric studies are carried out for the piled-raft foundation system. In the numerical analysis, the elasto-pastic finite element model(Mohr-Coulomb model) is used to present the foundation response and design charts, which enable the determination of the raft size and pile length and spacing.

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.160-168
• /
• 2001

This study aims at the development of computer program for the deformation analysis of soft ground, and using this computer program, study the constraint effect of deformation heaving, lateral displacement of the soft ground reinforced with improvement of soft ground up to hard strata, under intact state(natural). The following results are obtained. 1. Improvement of soft ground to the hard strata works well against the settlement of neighboring ground. 2. the larger the rigidity or width of improvement of layer to hard strata is, the less settlement occurs. 3. Improvement of soft ground to the hard strata is of no use.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.123-136
• /
• 2004

Terzaghi의 1차원 압밀이론은 그 유도과정에 있어 몇 가지 중요한 가정사항을 내포하고 있으며, 이로인해 이 이론을 연약 점토지반의 압밀거동에 적용하는데는 많은 모순이 발생할 수 밖에 없다. 특히, 미소변형 및 선형 물질함수에 대한 가정은 실제 현장의 압밀현상과 비교할 때 많은 오류를 발생시키는 원인으로 작용한다. 이러한 이유에서, Gibson 등은 물질함수의 비선형성을 고려할 수 있는 1차원 비선형 유한변형률 압밀이론에 대한 엄밀해를 발표하였다. 그러나, 이 이론은 연직배수공법이 적용된 일반적인 연약 점토지반의 압밀현상에는 적용시킬 수 없다는 단점을 내포하고 있다. 본 연구에서는 포화된 지반의 수직 및 수평방향 배수를 고려하며 지반의 자중 및 투수성과 압축성에 대한 물질함수의 비선형적 특성을 반영할 수 있는 압밀모델을 제안하였다. 또한 제안된 모델을 실제 압밀현상에 적용하기 위한 수치해석 기법을 개발하였다. 수치해석에 이용된 물질함수의 특성은 표준압밀 시험 및 로우셀 시험, 개량 표준압밀 시험등을 이용하여 산정되었다.