• 한국지반공학회논문집
• /
• 제28권8호
• /
• pp.89-99
• /
• 2012

연약지반 구간의 도로 확장공사는 연약지반의 특성으로 인해 우선 시행되는 확장 부 성토 시 발생되는 침하로 기존고속도로에 연동침하가 발생된다. 이 경우 지반침하 및 변형에 의한 포장 평탄성 불량, 차량 주행 안전성 저하, 구조물 안정성 감소 등 시공 및 기존도로 유지관리에서 많은 어려움을 유발한다. 특히 대심도 연약지반에서는 이와 같은 문제가 발생될 수 있는 여지가 대단히 높다. 따라서 이러한 문제점이 고려된 설계가 이루어져야 할 것이다. 본 연구에서는 연약지반 분포심도 최대 약 50m가 존재하는 남해고속도로 제2지선 확장공사를 대상으로 기존 설계안의 현황을 파악한 후 그 개선안을 제시하였다.

• The Journal of Korean Physical Therapy
• /
• 제15권3호
• /
• pp.1-15
• /
• 2003

The purpose of this study was to evaluate the change of lower extremity alignment according to plantar surface compliance in standing status. The thirty normal adults (15 men and 15 women) aged between 20 and 29 were assigned to 3 groups: control group, experimental groups (AHPS group, ASPH group). The lower extremity alignment was examined before and after adaptation with corresponding foam types. The results of this study were as follows : 1. As the result of comparing lower extremity alignment before and after test of the control group which any change did not exist in plantar surface compliance, there were not significant differences in the angle A, B, C, D, E of right and left(p>0.05). 2. As the result of comparing lower extremity alignment before and after test of the AHPS group which forefoot part of plantar surface is hard and rear foot part is soft, there were not significant differences in the angle A of right and left(p>0.05). But, there were significantly decreased in the angle B, C, D, E of right and left(p<0.05). 3. As the result of comparing lower extremity alignment before and after test of the ASPH group which forefoot part of plantar surface is soft and rear foot part is hard, there were not significant differences in the angle A of right and left(p>0.05). But, there were significantly increased in the angle B, C, D, E of right and left(p<0.05). 4. As the result of comparing lower extremity alignment of the control group, AHPS group and ASPH group, there were not significant differences in the angle A, B, C, D, E of right and left before test(p>0.05). But, there were significant differences in the angle C, D of right and left after test(p<0.05).

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2013-2018
• /
• 2014

The adsorption and decomposition of trimethylene oxide ($C_3H_6O$) molecule on the Al(111) surface were investigated by the generalized gradient approximation (GGA) of density functional theory (DFT). The calculations employed a supercell ($6{\times}6{\times}3$) slab model and three-dimensional periodic boundary conditions. The strong attractive forces between $C_3H_6O$ molecule and Al atoms induce the C-O bond breaking of the ring $C_3H_6O$ molecule. Subsequently, the dissociated radical fragments of $C_3H_6O$ molecule oxidize the Al surface. The largest adsorption energy is about -260.0 kJ/mol in V3, V4 and P2, resulting a ring break at the C-O bond. We also investigated the decomposition mechanism of $C_3H_6O$ molecules on the Al(111) surface. The activation energies ($E_a$) for the dissociations V3, V4 and P2 are 133.3, 166.8 and 174.0 kJ/mol, respectively. The hcp site is the most reactive position for $C_3H_6O$ decomposing.

• 공업화학
• /
• 제23권5호
• /
• pp.501-504
• /
• 2012

본 연구에서는 균일하고 높은 비율의 에치 피트를 갖는 알루미늄 전극을 제작하기 위해 소프트 리소그래피를 이용하여 알루미늄 표면에 보호층을 형성하였다. 알루미늄 표면 위에 잘 정돈된 보호층을 형성하기 위해 다양한 방법을 시도하였으며, 보호층을 이용한 알루미늄 에칭과 보호층이 존재하지 않는 알루미늄 에칭을 비교 관찰하였다. 보호층을 이용하여 알루미늄 에칭을 진행하였을 때, 알루미늄 표면에 균일한 에칭 표면이 확인되었으나, 보호층이 존재하지 않았을 때는 불균일한 표면 에칭이 관찰되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.335-335
• /
• 2011

Instability of a thin film attached to a compliant substrate often leads to emergence of exquisite wrinkle patterns with length scales that depend on the system geometry and applied stresses. However, the patterns that are created using the current techniques in polymer surface engineering, generally have low aspect ratio of undulation amplitude to wavelength, thus, limiting their application. Here, we present a novel and effective method that enables us to create wrinkles with a desired wavelength and high aspect ratio of amplitude over wavelength as large as to 2.5:1. First, we create buckle patterns with high aspect ratio of amplitude to wavelength by deposition of an amorphous carbon film on a surface of a soft polymer poly(dimethylsiloxane) (PDMS). Amorphous carbon films are used as a protective layer in structural systems and biomedical components, due to their low friction coefficient, strong wear resistance against, and high elastic modulus and hardness. The deposited carbon layer is generally under high residual compressive stresses (~1 GPa), making it susceptible to buckle delamination on a hard substrate (e.g. silicon or glass) and to wrinkle on a flexible or soft substrate. Then, we employ glancing angle deposition (GLAD) for deposition of a high aspect ratio patterns with amorphous carbon coating on a PDMS surface. Using this method, pattern amplitudes of several nm to submicron size can be achieved by varying the carbon deposition time, allowing us to harness patterned polymers substrates for variety of application. Specifically, we demonstrate a potential application of the high aspect wrinkles for changing the surface structures with low surface energy materials of amorphous carbon coatings, increasing the water wettability.

• 한국동물위생학회지
• /
• 제22권4호
• /
• pp.405-410
• /
• 1999

A 7 month old male shepherd was presented with anorexia, diarrhea, and salivation, and euthanized due to no clinical improvement. Grossly, ulcers were seen on ventral surface of tongue and stomach. The mineralization was obvious in the intercostal space, lung and inner surface of aorta. Kidney was pale, firm and irregular. Histopathology confirmed uremic pneumonitis, end stage kidney and hyperplasia of parathyroid. This case was the typical uremic condition of juvenile dog, which was characterized the diffuse soft tissue mineralization due to hyperparathyroidism secondary to chronic renal failure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.123-130
• /
• 1999

This paper presents a study of geotechnical treatment for artesian pressure after extensive investigation was performed on the distribution and characteristics of artesian condition which exists at Yangsan/Mulgeurn site. The result of analysis indicates that the artesian pressure seems to be up to 2.9M above the existing ground surface, originating from the higher ground water recharging sources in the surrounding hills and mountains. There is no harmful effect after the site development since the height of embankment is more than 4M above the existing ground surface.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.157.6-157
• /
• 2001

We estimated various neuron functions to construct of engineering neurons, which are the combination of sigmoid, linear, sine, quadric, double/single bended, soft max/minimum functions. These combinations are estimated by the property on the potential surface between the learning points, calculation speed, and learning convergence; because the surface depends on the inference ability of a neuron system; and speed and convergence are depend on the efficiency on the points of engineering applications. After the evaluating discussions, we can select more appropriate combination than original sigmoid function´s, which is single bended function and linear one. The combination ...

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.78-89
• /
• 1995

Phenomelocial evidences for three-dimensional crystallizing $\pi$-bondings are investigated in case of the soft layer very near the suface of the metal , the surface layer of certain crystaline thermoplastics. the increased contact area of the metalic frictional interface and the delaminated sheet-like wear particles of the metal . The wear mechanisms are the cracks at the boundaries of the grains and their propagations parallel to the surface. The cracks are made by the reorientations of the atoms in the grains and the rotations of the grains.

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2005년도 제61회 국제 유가공 심포지움
• /
• pp.21-27
• /
• 2005

Surface mould ripened soft cheeses such as Camembert are characterized by the presence of a felt-like coating of white mycelia due to the growth of Penicillium camemberti at the surface. The presence of this mould gives these cheeses a different appearance, as well as a typical aroma and taste. It also lead to a more complex ripening than in other varieties of cheese with simple flora. Theses cheeses are becoming increasingly popular with consumer and there is an increasing demand for them.