• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.102-103
• /
• 2014

Due to the nature of the existing load, the criteria of assessing the intensity of the lightweight wall's impact resistance has been though of as obscure. The current study, therefore, focuses on the standardized assessment of the impact resistance to the force of the large soft body applying to the lightweight wall. The gypsum board wall showed a low level of the maximum residual displacement. It is, however, required to be careful about the selection of the finishing process since the high level of the maximum displacement is likely to cause harm to finishing materials. Unlike the gypsum board, the ALC block wall displayed a considerable rigidity while showing almost no maximum residual displacement. Even with the low level of the maximum displacement due to the stiffness, the ALC block wall is still likely to be affected by the vibration derived from any impact on the surface, which demands a need for additional study. The future experimental study, accordingly, will focus on the impact of the vibration on finishing materials, consequently leading to the accurate prediction of the possibility of potential damage to the lightweight wall caused by the large soft body.

• Mycobiology
• /
• 제34권3호
• /
• pp.151-153
• /
• 2006

Rhizopus soft rot caused by Rhizopus stolonifer occurred on pears (Pyrus serotina) in the Jinju City Agricultural Products Wholesale Market in Korea from 2004 to 2005. The infection usually started from wounds due to cracking at harvest time. The lesions started as water-soaked, rapidly softened, then gradually expanded. The mycelia grew vigorously on the surface of the fruits and formed stolons. Colonies on potato dextrose agar at $25^{\circ}C$ were white cottony to brownish black. Sporangia were globose, black and $90{\sim}120\;{\mu}m$ in size. Sporangiophores were light brown and $480{\sim}2600{\times}12{\sim}18\;{mu}m$ in size. Sporangiospores were globose to oval, brownish, streaked, and $8{\sim}14{\times}6{\sim}10\;{\mu}m$ in size. Columella were light brownish gray, hemispherical and $70{\sim}80\;{\mu}m$ in size. On the basis of these symptoms, mycological characteristics and pathogenicity tests on host plants, the fungus was identified as Rhizopus stolonifer (Ehrenb.) Vuill. This is the first report of rhizopus soft rot on pear (P. serotina) caused by R. stolonifer in Korea.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.210-221
• /
• 2009

A new foundation type which is called Top-Base method has been used frequently in engineering practices in Korea. In this study, the settlement behavior of concrete Top-Base foundation on soft ground is investigated since the consolidation settlement of the embedding depth and the effect of footing dimensions are not included in current Korean criterion (2007). To obtain detailed information, the model tests of the Top-Base foundation are performed using the PLAXIS 3D finite element analysis. It is shown that in-situ measurements and finite element analysis of the behavior of foundations indicate that consolidation settlement is reduced up and bearing capacity of the foundation increases up to 50%~100%, compared to the primary non-treated ground. Based on this study, it is found that the Top-Base foundation prevents the lateral deformation of soft ground and reduces its negative dilatancy to the surface settlement, and that the foundation creates rather uniform stress distribution under it to increase its bearing capacity. It is also found that the total settlement of Top-Base foundation was highly dependent on the consolidation settlement and footing configurations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.144.2-144.2
• /
• 2013

With the synthesis of graphene sheets as large-scale and high quality, it is essentially important to develop suitable graphene patterning process for future industrial applications. Especially, transfer or patterning method of CVD-grown graphene has been studied. We report simple soft lithographic process to develop easily applicable patterning method of large-scale graphene sheets by using chemically functionalized polymer stamp. Also important applications, the prototype capacitors with graphene electrode and commercial polymer dielectrics for the electrostatic-type touch panel are fabricated using the developed soft lithographic patterning and transfer process.

• 한국분말재료학회지
• /
• 제28권3호
• /
• pp.233-238
• /
• 2021

Iron-based amorphous powder attracts increasing attention because of its excellent soft magnetic properties and low iron loss at high frequencies. The development of an insulating layer on the surface of the amorphous soft magnetic powder is important for minimizing the eddy current loss and enhancing the energy efficiency of high-frequency devices by further increasing the electrical resistivity of the cores. In this study, a hybrid insulating coating layer is investigated to compensate for the limitations of monolithic organic or inorganic coating layers. Fe₂O₃ nanoparticles are added to the flexible silicon-based epoxy layer to prevent magnetic dilution; in addition TiO₂ nanoparticles are added to enhance the mechanical durability of the coating layer. In the hybrid coating layer with optimal composition, the decrease in magnetic permeability and saturation magnetization is suppressed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.880-887
• /
• 1998

In order to study heat transfer characteristics of spray cooling for the purpose of uniform and soft cooling of high temperature surface a series of experiments for a hot horizontal copper flat plate was performed by downflow spray water using flat spray nozzle. Cooling curves were mea-sured under the various experimental conditions of flow rates and temperatures of cooling water Surface temperature surface heat fluxes and heat transfer coefficients of horizontal upward-facing flat surface were calculated with cooling curves measured at each radial positions near the cooling surface by TDMA method. Generally heat transfer characteristics for spray cooling is simi-lar to boiling phenomenon of pool boiling. The minimum heat flux(MHF) appear at the surface temperature of about ${\Delta}Tsat=250^{\circ}C$ and the critical heat flux(CHF) appear at about ${\Delta}Tsat=250^{\circ}C$.

• 한국표면공학회지
• /
• 제31권5호
• /
• pp.266-277
• /
• 1998

The effects of $H_2S$ gas ratio, temperature and time on the case depth, hardness, and sulfide and nitride formation on the surface of sulfnitrided SCM440 steel have been studied by micro-pulse plasma technique. The thickness of compound layer of sulfide and nitride increased with the increase of time, temperautre and $H_2S$ gas ratio. But surface hardness decreased with the increase of soft sulfide layer because the hard nitride layer formed beneath the sulfide. The thickness of sulfide layer was about 10$\mu\textrm{m}$ abpve 0.0088% of $H_2S$ gas. The highest surface hardness of the compound layer was Hv835 at $530^{\circ}C$, 1hr and 0.06% of $H_2S$ gas. X-ray diffraction indicated that the surface products were $Fe_{1_x}S$, $Fe_{2.5}N$ and $Fe_4N$. It was confirmed by EPMA that sulfide only existed in the surface.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.65-69
• /
• 2003

본 연구는 천연보존제인 자몽씨 추출물과 합성보존제인 $H_2O_2$를 사용하여 soft contact lens 착용시 각막염의 원인중 하나인 Gram negative bacteria인 Pseudomonas aeruginosa 대한 살균효과를 알아보았다. Pseudomonas aeruginosa는 4주간 배양하여 포낭 형태를 이루게 한 다음 $7{\times}10^6CFU/m{\ell}$의 현탁액에 soft contact lens를 오염시킨 후 천연보존제와 합성보존제의 살균 효과를 비교하였다. 현탁액에 담군 120분후 균의 생존률은 천연보존제는 $1{\times}10^3CFU/m{\ell}$ 합성보존제는 $0.5{\times}10^2CFU/m{\ell}$으로 나타나 유의한 차이는 없었다. 하지만 합성보존제의 경우 눈에 자극감이나 화학적 안 외상을 줄 수 있는 점을 고려하면 자몽씨 추출액과 같은 인체에 무독한 천연 보존제의 개발이 필요한 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제10권4호
• /
• pp.1-10
• /
• 2011

측방유동의 발생이 가능한 해안연약지반에 성토를 시행하면 지표면의 하부에는 수평변위가 발생한다. 이러한 수평변위는 인접지반에 변형을 발생하여 인접 지하에 매설된 각종 기반시설에 영향을 미칠수 있다. 수평변위의 억지대책으로 성토지지말뚝과 억지말뚝을 적용하였고, 억지대책의 효과분석을 위해 무보강지반과 보강지반으로 구분하여 수치해석을 시행하였다. 수치해석 결과는 억지말뚝 보강시가 무보강시보다 1.9배의 효과가 있었다. 성토지지말뚝의 보강은 무보강시보다 2.6배의 효과가 있는 것으로 나타났다. 또한, 두 억지대책중 억지말뚝 보강보다 성토지지말뚝 보강이 1.3~1.6배의 효과가 있는 것으로 나타났다.

• 지질공학
• /
• 제21권2호
• /
• pp.117-124
• /
• 2011

해안 매립 연약지반상에 도로나 제방을 성토한 경우 연약지반 속에서는 침하, 융기, 측방유동 등의 지반변형이 빈번하게 발생한다. 연약지반의 지반변형 거동을 지상에서 원지반을 훼손하지 않고 조사하기 위하여 전기비저항탐사법을 적용하여 보았다. 본 연구에서 해안지역의 점토질 퇴적층이 주로 분포하는 서해안 시화지구의 매립지역에서 실험성토를 실시하였다. 실험성토후, 성토하중에 의한 연약지반의 변형 영향범위를 확인하기 위하여 전기비저항탐사법을 실시한 결과, 수평방향으로는 성토 지역에서 남측으로 약 5 m 범위, 수직 방향으로는 지표해 약 5~6m로서 성토 높이의 약 1.0~1.2배 심도까지 높은 전기비저항으로 성토의 영향을 받는 것으로 나타났다. 본 연구결과 성토에 의한 연약지반의 변형을 해석하는데 전기비저항탐사 방법을 적용이 가능한 것을 확인하였다.