• Korean Journal of Materials Research
• /
• v.13 no.10
• /
• pp.663-667
• /
• 2003

The effects of paste materials on field emission properties in a carbon nanotube(CNT) cathode were investigated for high-efficient field emission displays. The major components in CNT paste for screen printing were a metallic Ag-paste, a dielectric glass-frit and CNT ink. The emission current from the cathode by an electron tunneling effect increased with an increase in the dielectric material fraction in the CNT paste, which is related to an increase of field enhancement factor in Fowler-Nordheim equation. The surface treatment used, after soft baking of the screen-printed CNT films, greatly affected the decrease in the turn-on field in CNT cathode and the uniformity of emission sites over the entire CNT film area.

• Fisheries and Aquatic Sciences
• /
• v.19 no.1
• /
• pp.7.1-7.6
• /
• 2016

In nature, marine mussels (Mytilus edulis) suffer less fouling colonization on the newly formed sides of their shells. Using settlement assays with algal spores of Porphyra suborbiculata, we determined that spore attachment and germination on the periostracum decreased to 36.8 and 3.3 %, respectively. Additionally, the spore settlement was considerably diminished by periostracum dichloromethane extracts containing 19 % oleamide, a major antifouling compound. A scanning electron micrograph of the surface revealed a regular ripple structure with approximately $1.4{\mu}m$ between ripples. Based on these results, mussel periostraca or their associated biomimetic materials may become environmentally friendly, antifouling agents for preventing the settlement of soft foulants.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.5
• /
• pp.10-21
• /
• 2006

For analyze of the bearing capacity, skin friction and settlements of pile on axial compressive loading, both Load transfer tests of pile and pile loading test in field have application to commonly before pile installing. A bearing capacity of pile was affected by the characteristics of surrounding ground of pile. Especially, that is very different because of evaluation of settlement due to each soil conditions of ground depths. The ground characteristics using evaluation of bearing capacity of pile through load transfer analysis depends on N values of SPT, and then a bearing capacity of pile installed soft ground and refilled area may be difficult to rational evaluation. An evaluation of bearing capacity on pile applied axial compressive loading was effected by strength of ground installed pile, unconfined compressive strength at pile tip, pile diameter, rough of excavated surface, confining pressure and deformation modules of rock etc and these are commonly including the unreliability due to slime occurred excavation works. Load transfer characteristics considered ground conditions take charge of load transfer of large diameter pile was investigated through case study applied load transfer tests. To these, matrix analytical technique of load transfer using finite differential equation developed and compared with the results of pile load test.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.72-77
• /
• 2007

Abrasive wear between piston ring face and cylinder liner is an extremely unpredictable and hard-to-reproduce phenomenon that significantly decreases engine performance. Wear by abrasion are forms of wear caused by contact between a particle and solid material. Abrasive wear is the loss of material by the passage of hard particles over a surface. From the pin-on-disk test, particle dent test and scuffing test, abrasive wear characteristics of diesel engine cylinder liner-piston ring have been investigated. Pin-on-disk test results indicate that abrasive wear resistance is not simply related to the hardness of materials, but is influenced also by the microstructure, temperature, lubricity and micro- fracture properties. In particle dent test, dent resistance stress decreases with increasing temperature. From the scuffing test by using pin-on-disk tester, scuffing mechanisms for the soft coating and hard coating were proposed and experimentally confirmed.

• Archives of Reconstructive Microsurgery
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2016

Urethral reconstruction is a problematic issue, thus its management can be challenging. Different methods using various materials were introduced for urethral reconstruction. The authors have made some changes in the groin flap surgery, affording more successful urethral reconstruction for defects of long urethra and penile soft tissue. A 45-year-old male requested both functional and cosmetic reconstruction of his defected penis, caused by an iatrogenic urethral injury and chronic infection following removal of paraffin self-injected on the penile shaft. The defect affected the full length of the penile urethra, corpus spongiosum, and prepuce. A groin flap was designed, measuring $28{\times}10cm$. The most distal flap was utilized for the construction of the luminal surface of the neourethra; relaxed length measuring 8 cm, and the lumen wide enough. Competent external meatus and neourethra was confirmed by retrograde cystogram and the patient voided with sufficient urine caliber up to 2 years follow-up. This operative technique has advantages. Donor sites have non-hair bearing skin for the neourethra and minimal or almost notrecognizable donor site morbidity. After surgery, the patient was relieved from voiding difficulties combined with psychological stress. The author would like to introduce a unique approach for the urethral and ventral phalloplasty using the groin flap.

• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.584-588
• /
• 2013

Background The ability to achieve a long-term, stricture-free urethral repair is one of the ongoing challenges of reconstructive urologic surgery. A successful initial repair is critical, as repeat procedures are difficult, owing to distortion, scarring, and short urethral stumps. Methods We describe a technique in which the gracilis muscle flap is laid on or wrapped around the urethral repair site to provide a well-vascularised soft tissue reinforcement for urethral repair. This technique promotes vascular induction, whereby a new blood supply is introduced to the repair site to improve the outcome of urethral repair or anastomotic urethroplasty. The surface contact between the muscle flap and the repair site is enhanced by the use of fibrin glue to improve adherence and promote inosculation and healing. We employed this technique in 4 patients with different urethral defects. Results After a follow-up period of 32 to 108 months, all of the urethral repairs were successful without complications. Conclusions Our results suggest that the use of a gracilis muscle flap to vascularise urethral repairs can improve the outcome of challenging urethral repairs.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.102-108
• /
• 2003

The purpose of this study was to determine the changes of skin temperature and subjective fatigue of the thoracic vertebrae by the chiropractic adjustments. Stimulation of the sympathetic nervous system will cause the changes in the skin blood flow which can be detected by measuring the skin surface temperature. This study was to see whether chiropractic adjustments could affect the activity of the sympathetic nervous system as reflected by changes in skin temperature of the thoracic. Skin temperature and subjective fatigue on 16 subjects was measured before, within 10 sec, 10min, 20min and 30 min after a thoracic adjustment with Digital Infrared Thermal Imaging(DITI) and Visual Analogue Scale(VAS). The adjustments consisted of a straight posterior-to-anterior high-speed, low-amplitude thrust to the transverse process of T3-T10 using a reinforced hypothenar contact. The average temperature and fatigue changed when the spine was considered as an entire unit. These results illustrate that the blood flow through the soft tissue can be affected by specific adjustments to the spine. This study might be served as an useful baseline data for the changes of the circulation and fatigue after the chiropractic adjustments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.1
• /
• pp.134-142
• /
• 2003

Performances of Taekwondo fabrics were evaluated in respect of fiber component. yarn count, weave structure and wearing comfort. As a beginning step, we investigated the present situation of Taekwondo wears by questionnaire from pro and amateur Taekwondo players. Samples employed in this study were cotton/nylon blend fabric that was newly woven for this study as well as fabrics of current Taekwondo wears for sale in the market. Their fundamental properties measured were such as air permeability, water vapor transport. wickability, absorption rate, Qmax values, thermal conductivity, durability, hand value, and etc. In addition, subjective wearing sensations were evaluated using Taekwondo wears made of those fabrics. From the results of the objective measurement and the subjective wearing test, we estimated the total fitness of fabrics as a Taekwondo wear. From the questionnaire we could see that pro players and amateurs wanted highly absorbing, quick drying, and soft-tough and complained abrasive surfaces and static elasticity of current fabrics. In view of the results so far achieved, nylon blended fabrics newly woven in this study, showed better comfort-related properties from both of the objective and subjective tests. It was also represented that finer yams enhanced water absorption and touch, and fabrics with rough surface such as honeycomb weave was superior in wearing comfort as well as aesthetic appearance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.1
• /
• pp.40-47
• /
• 2003

This paper discussed the assessment of hand of Tencel denim fabrics finished by enzymatic hydrolysis. The subjective hand and the preference of Tencel denim fabrics were evaluated using the developed scale. The factors affecting consumers taste for Tencel denim fabrics were analyzed by statistics using SAS program. Also, the effects of cellulase treatment on the properties of Tencel denim fabrics were evaluated by the subjective hand measurements. The results are as follows: As the weight loss increased. fabrics were evaluated as finer, smoother, softer, warmer, more refined (surface properties), more compact and weaker (durability), more flexible, flossier, lighter, softer, thinner (sense of weight), more elastic, and less wrinkly (shape recovery). Fabrics were evaluated to have the dry touch regardless to the rate of weight loss (moisture properties). Overall hand preference of Tencel denim fabrics was in the side of not preferred. Hand of Tencel fabrics seems not to appeal to Korean people. Color preferences were not significantly different among five groups. The correlations between subjective hand and preference showed that fine, smooth, flexible, warm, refined, loose, soft, dry touches were preferred in Tencel denim fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1323-1332
• /
• 2006

Lyocell is a regenerated cellulose fiber manufactured by an environmentally-friendly process. Since the fiber has more crystalline region compared to rayon, lyocell shows higher wet-strength than rayon. Although fibril generation of lyocell is lower than that of rayon because of the reason, the fibril generated during the wet process deteriorates the smooth look and soft touch of the fabric. The efficient way to remove the fibril yet retain the strength property was investigated in this work. In order to scour and remove the fibril from the fabric, cellulase enzymes were introduced and the traditional scouring was carried to be compared. Weight loss, dye-ability, and strength of treated fabric were measured after the treatments. Scanning electron microscopy was used to observe the surface of the fiber. Among the cellulases used in this work, Denimax 992L showed the best results for removal of fibril with low weight loss and tensile strength loss. The optimal conditions for the enzymatic treatment could be chosen depending on a characteristic for final purpose of the lyocell product.