• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.751-756
• /
• 2017

A molding-type power inductor is an inductor that uses a hybrid material that is prepared by mixing a ferrite metal powder coated with an insulating layer and an epoxy resin, which is injected into a coil-embedded mold and heated and cured. The fabrication of molding-type inductors requires various techniques such as for coil formation and insertion, improving the magnetic properties of soft magnetic metal powder, coating an insulating film on the magnetic powder surface, and increasing the packing density by well dispersing the powder in the epoxy resin. Among these aspects, researches on additives that can disperse the metal soft magnetic powder having the greatest performance in the epoxy resin with high charge have not been reported yet. In this study, we investigated the effect of silanes, KBM-303 and KBM-403, and a commercial dispersant on the dispersion of metal soft magnetic powders in epoxy resin. The sedimentation height and viscosity were measured, and it was confirmed that the silane KBM-303 was suitable for dispersion. For this silane, the packing density was as high as about 72.49%. Moreover, when 1.2 wt% of dispersant BYK-103 was added, the packing density was about 80.5%.

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.111-120
• /
• 2011

A bacterial artificial chromosome library of Pectobacterium carotovorum 35 was constructed to characterize the genome and to sequence its hrp region. The hrp cluster of P. carotovorum 35 consisted of 26 open reading frames in five operons. A promoter-based green fluorescent protein technology was used to identify the genes regulated by the alternative sigma factor, HrpL, in P. carotovorum 35. The majority of the selected clones contained the hrpJ operon promoter sequence, which harbors a hrp box, but no putative hrp boxes were detected within the promoter sequences of two other hrpL-regulated genes encoding for pectate lyase and large repetitive protein. Although the promoters of five other hrp operons also contained hrp boxes, their expression was not HrpL-dependent in the promoter-based selection in E. coli. However, transcriptional analysis showed that expression from all operons harboring hrp boxes, except for the hrpN operon, was reduced significantly in the hrpL mutant. The severity of soft-rot symptoms when the hrpL mutant was applied to the surface of tobacco leaves, mimicking natural infection, was greatly attenuated. These results indicate that the hrpL gene of P. carotovorum 35 may be involved in the development of soft-rot symptoms.

• Research in Plant Disease
• /
• v.11 no.2
• /
• pp.204-207
• /
• 2005

A Rhizopus soft rot caused by Rhizopus stolonifer occurred on Momordica charantia at Daesan-myon, Chang-won city, Gyeongnam province from 2003 to 2005. The disease usually started from wound on fruit with water-soaking lesions. The lesion rapidly expanded and softened. The fungal mycelia grew vigorously and sporangia, sporangiophores, and stolons were formed on surface of the fruit. Spoyangiophores were $15\~30{\mu}m$ in width. Sporangia were globose or hemispheric and $90\~180{\mu}m$ in size. The color of sporangia was white and cottony at first and turned to brownish black with many spores at maturity. Columella were hemispheric and $80\~150{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black streaked and $7\~18{\times}6\~12{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus on PDA was $25^{\circ}C$. On the basis of mycological characteristics and pathogenicity to host plants, the causal fungus was identified as Rhizopus stolonifer (Ehrenberg ex. Fr,) Lind. This is the first report of Rhizopus soft rot on M. charantia caused by R. stolonifer in Korea.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.519-535
• /
• 1997

The responses of human pulp fibroblastic cells to Ga-As Semi-Conductor-Dens-Bio Laser (Frequency: 5 Hz~10,000 Hz Model: SD-101A RCA, U.SA)) were examined in vitro using pulp fibroblastic cells obtained from the pulp tissue of human tooth. The mitogenic effect of soft laser was assessed by measuring the MTT assay. The morphologic effect for soft laser showed under the scanning and transmission electron microscopy. The results as follows; 1. The mitogenic response of the soft laser was not observed until 4th time of radiation, while the mitogenic response at 4th time increased mitogenic effect by as much as 1.7 fold compared to the control value. 2. The mitogenic response of the soft laser on pulp fibroblast differ from the mitogenic response on other fibroblasts. 3. In scanning electron microscopic study, The microvilli of cell surface increased gradually with width and length after laser radiation, it demonstrate that development of microvilli have close connection with differentiation of cells. 4. Under the transmission electron microscope, The laser-treated cells maintained their elongated shape and a high degree of cellular polarization. The large cell body containing a well developed Golgi complex, a large number of profiles of rough endoplasmic reticulum, and great numbers of mitochondria. 5. The laser-treated cells maintained the long straight bundles of closely apposed microfilaments or individual filaments forming a cross-linked network. These findings suggest that the laser may have important roles in promotion of pulp healing and consequently may be useful for clinical application in pulp regenerative procedures.

• Mycobiology
• /
• v.29 no.3
• /
• pp.176-178
• /
• 2001

A soft rot of fruits caused by Rhizopus stolonifer occurred on cherry tomato in Jinju City Agricultural Products Wholesale Market, Korea. The disease infection usually started from wounding after cracking of fruits. At first, the lesions started with water soaked and were rapidly softened and diseased lesion gradually expanded. The mycelia grew vigorously on the surface of fruits and formed stolons. Colonies on potato dextrose agar at $25^{\circ}C$ were white cottony at first, becoming heavily speckled by the presence of sporangia and the browinish black, and spreading rapidly by means of stolons fired at various points to the substrate by rhizoids. Sporangia were $82.7{\times}196.7{\mu}m$ in size and globose or sub-globose with somewhat flattened base. The color of sporangia was white at first and then turned black with many spores, and never overhanging. Sporangiophores were $2.6{\sim}5.8{\times}12.3{\sim}24.2{\mu}m$ in width, smooth-walled, non-septate, tight brown, simple, long, arising in groups of $3{\sim}5$ from stolons opposite rhizoids. Sporangiospores were $8.2{\sim}18.8{\mu}m$ long, irregular, round, oval, elongate, angular, and browinish-black streaked. Columella was $64.1{\times}136.3{\mu}m$. brownish gray, and umberella-shaped when dehisced. The causal organism was identified to be R. stolonifer. This is the first report of Rhizopus soft rot on cherry tomato caused by R. stolonifer in Korea.

• Korean journal of food and cookery science
• /
• v.27 no.5
• /
• pp.507-522
• /
• 2011

In this study, samples of wheat flour and dough were prepared by adding of 1, 3, or 5% branched dextrin, which is produced from the amylopectin of waxy corn starch using a cyclization reaction with a branching enzyme. The samples were then evaluated qualitatively in terms of farinogram, viscogram, and extensogram characteristics. The fermentation power of dough expansion, extensogram characteristics, specific volume, baking loss, external/internal surface appearance, and sensory qualities were also examined after 4 weeks of storage at -20$^{\circ}C$ to determine the effect on freeze-thaw stability and quality improvement of branched dextrins in the soft roll bread formulation. Furthermore, the samples along with a control were compared regarding their quality characteristics, including changes in moisture content, water activity, color, and textural characteristics during a storage period of 4 days at 20$^{\circ}C$ to determine the effect on preventing retrogradation of the branched dextrin. As the branched dextrin content increased, area and extensibility increased, whereas water absorption, fermentation power of dough expansion, resistance/extensibility ratio, baking loss, and brownness of the crust decreased. However, the control group presented significantly higher peak viscosity, resistance, specific volume, taste, overall acceptability, moisture content, water activity, springiness, cohesiveness, and resilience values than those of the branched dextrin samples, whereas lightness, hardness, and chewiness showed the reverse effect. As the storage period increased, lightness, hardness, and chewiness increased, whereas cohesiveness decreased. In conclusion, the results indicate that adding 1~3% branched dextrin into a soft roll bread formulation from frozen dough had no positive effect on freeze-thaw stability or preventing retrogradation but may provide good nutritional properties.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2011

The problems like a deterioration of loading bearing capacity, an exaggeration of settlement and lateral deformation are able to be generated, meanwhile structures are built in soft ground. Top-Base method is belonged to a rigidity mat foundation method which is used to surface treatment of soft ground. This method makes an effect to increase the bearing capacity of foundation using friction force, and prevent the differential settlement. Further more, the In-Situ Top-Base method has advantages in the phase of economic effect by reduction of the construction cost and offers an expediency on construction comparing with precast products. This paper presents the way of the estimation of bearing capacity for In-Situ Top-Base method through field plate load test in soft ground. It utilizes the results to a future design by analyzing the properties in the existing study and designs through these analysis and calculating the top-base method's reasonable range.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.655-662
• /
• 2011

Purpose: The anterolateral thigh flap is versatile flap for soft-tissue reconstruction for defects located at various sites of the body. This useful flap offers a thick and vascular fascia lata component with large amounts that can be soft tissue coverage for different reconstructive purposes. We present our clinical experience with the use of vascular fascia lata, combined with anterolateral thigh flap for various reconstructive goals. Methods: From April 2008 to February 2011, we transferred anterolateral thigh flaps with fascia lata component to reconstruct soft-tissue defects for different purposes in 11 patients. The fascia lata component of the flap was used for tendon gliding surface in hand/forearm reconstruction in 4 patients, for reconstruction medial and lateral patellar synovial membrane and retinaculum in 2 patients, for reconstruction of plantar aponeurosis in the foot in 2 patients, for reconstruction of fascial and peritoneal defect in the abdominal wall in 2 patient, and for dural defect reconstruction in the scalp in the remaining one. Results: Complete loss of the flap was not seen in all cases. Partial flap necrosis occurred in 2 patients. These complications were treated successfully with minimal surgical debridement and dressing. Infection occurred in 1 patient. In this case, intravenous antibiotics treatment was effective. Conclusion: Anterolateral thigh flap has thick vascular fascia with large amounts. This fascial component of the flap is useful for different reconstructive aims, such as for tendon, ligament, aponeurosis defects, abdominal wall or dura reconstruction. It should be considerated as an important advantage of the flap, together with other well-known advantages.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.571-577
• /
• 2009

Purpose: The Provision of thin and pliable tissue and the adequate coverage of tendon - gliding surface is necessary for a soft tissue defect of the hand with exposure of bone, tendon and muscle. This report will discuss our experience with anterolateral thigh fascial free flap for the reconstruction of the soft tissue defect of the hand. Methods: Between February 2004 and August 2008, seven patients with full - thickness soft tissue defects of the hand were reconstructed by means of a composite anterolateral thigh fascial free flap. There were soft tissue defects associated with trauma (n=5), scar contracture (n=1) and necrosis due to ischemia (n=1). Flaps were harvested from the anterolateral thigh as adipofascial flaps with only a small sheet of fascia and fatty tissue above it. The fascia and the skin of the donor site was closed directly and delayed split - thickness skin graft was performed. Result: All flaps survived completely. The size of the transferred flap ranged from $2{\times}4cm$ to $5{\times}8cm$. Thin flap coverage was possible without secondary debulking operations. It left minimal donor site morbidity with a linear scar. In one case, the thigh muscle herniation in the donor site was developed. Conclusion: The anterolateral thigh fascial free flap provided thin and pliable tissue which can establish a tendon - gliding mechanism, minimal bulk, minimal donor site morbidity. The disadvantages of this technique were the need for a skin graft and the muscle herniation of donor site.

• Journal of Korean Society of Forest Science
• /
• v.107 no.2
• /
• pp.166-173
• /
• 2018

This study was carried out to establish the standard of sub-base facility which can strengthen road surface bearing capacity for smooth passage of logging trucks in forest road as the size of the logging truck has been increased in order to improve the efficiency of timber transportation. The results of reinforcement effect analysis of the surface bearing capacity by the thickness of sub-base prepared with the optimum aggregate mix ratio using geosynthetics for forest road on the soft ground in the Forest Technology and Management Research Center are as follows. The surface bearing capacity of CBR exceeding 15% was found to be sufficient when the sub-base was constructed over 0.2 m depth of laying gravels with installation of geosynthetics after digging out subsoil. However, there is no significant difference in reinforcement effect of surface bearing capacity by types of geosynthetics. And, it was found that the surface bearing capacity was insufficient in the installation of sub-base. Therefore, in the case of soft ground, It is possible to secure the reinforcement of the surface bearing capacity for the smooth passage of heavy logging trucks by sub-base, that was constructed over 0.2 m depth of laying gravels with installation of geosynthetics after digging out subsoil.