• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.251-255
• /
• 2005

This paper proposes a new soft switching technique for a phase-shift controlled bi-directional DC-DC converter. The described converter employs a low profile high frequency transformer and two active full-bridge converters for bidirectional power flow capability. A new soft switching technique is proposed, which guarantees soft switching over wide range (no load to full load) without any additional circuit components. In the proposed switching scheme, the switch pairs in the diagonal position of the converter each are turned on/off simultaneously by the switching signals with a variable duty ratio depending on the phase shift amount, and the converter is operated without freewheeling interval.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.133-136
• /
• 2008

This paper presents a novel soft switching topology with resonant DC-DC converter and inverter. The resonant DC-DC converter consists of the auxiliary switch, resonant capacitor and inductor. All switches in the proposed topology is turn on at ZCS and turn off at ZVS operation. The proposed soft switching technology can be obtained the reduced switching losses and voltage and current stress of the power devices. Therefore, the resonant converter efficiency is higher than conventional boost converter. Simulation results on a 1kW soft switching converter are presented.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.121-123
• /
• 2008

A high efficiency soft switching boost converter is proposed in this paper. The conventional boost converter generates switching losses at turn on and off. Because of those, the whole system efficiency is reduced. The proposed converter utilizes soft switching method using resonant circuit with an auxiliary switch. Therefore, the proposed converter reduces switching losses lower than the hard switching. The proposed soft switching boost converter can be applied to photovoltaic system, power factor correction circuit and etc.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.919-927
• /
• 2013

This paper proposes a Boundary Current Mode (BCM) control scheme to realize soft switching on a conventional single phase full bridge DC/AC inverter. This technique with the advantages of no auxiliary components, low cost, high efficiency, and simple in control, is attractive for micro-inverter applications. The operation principle and characteristic waveforms of the proposed soft switching technique are analyzed in theory. A digital controller is provided based on that theory. To balance the requirements of efficiency, switching frequency, and inductor size, the design considerations are discussed in detail to guide in BCM inverter construction. A 150W prototype is built under these guidelines to implement the BCM control scheme. Simulation and experiment results demonstrate the feasibilities of the proposed soft switching technique.

• Journal of Public Diplomacy
• /
• v.1 no.2
• /
• pp.75-116
• /
• 2021

This study argues that scholars lack an adequate conceptualization of the strategic use of social media framing by Ministries of Foreign Affairs (MFAs) during crises. As a theoretical starting point, this article employs the concept of soft disempowerment to suggest that MFAs may use online framing to limit an adversary's range of possible actions during a crisis by depicting that adversary as violating norms and values deemed desirable by the international community. Next, the article introduces the concept of mutually assured delegitimization (MAD), which suggests that actors may call into question one another's adherence with certain norms and values during crises, which results in the mutual depletion of soft power resources. Importantly, this article proposes a novel, methodological approach for the analysis of individual tweets during crises. To illustrate its methodological and conceptual innovations, the study analyzes tweets published by the MFAs of the United States (US) and Russia during the Crimea crisis and demonstrates that both MFAs used Twitter to negatively frame each other by calling their morals into question, which resulted in MAD.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.179-185
• /
• 2005

This paper presents a novel circuit topology of a high efficiency single-phase power conditioner. This power conditioner is composed of time-sharing sinewave absolute pulse width modulated boost chopper with a bypass diode in the first power processing stage and time-sharing sinewave pulse width modulated full-bridge inverter in the second power processing stage operated by time-sharing dual mode pulse pattern control scheme. The unique operating principle of the two power processing stage with time-sharing dual mode sinewave modulation scheme is described with a design example. This paper proposes also a sinewave tracking voltage controlled soft switching PWM boost chopper with a passive auxiliary edge-resonant snubber. The new conceptual operating principle of this novel power conditioner related to new energy utilization system is presented and discussed through the experimental results.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1393-1402
• /
• 2019

This paper proposes a new power flow control method for soft-switched, four channel, five level resonant buck dc-dc converters. These converters have two input channels, which can be supplied from sources with identical or different voltages, and four output channels with arbitrary output voltages. They are specially designed to supply multilevel inverters. The design methodology for their power flow control has been developed considering a general case when the input voltages, output voltages and loads can be asymmetrical. A special emphasize is paid to the limitations and restrictions of operation. The theoretical studies are confirmed by numerical simulations and laboratory tests carried out at various operation points. Exploiting the advantages of the newly proposed power control strategy, the converter can supply five level inverters in dc microgrids, active filters, power factor correctors and electric drives. They can also play an interfacing role in renewable energy systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.76-81
• /
• 2002

In high power motor drive system, the hard-switching topology produces severs switching losses and EMI noises. Also the inverter switching frequency is thus limited because of excessive loss and thermal handling problem. The primary purpose of the proposed works on the induction motor drive system is to develop an advanced soft-switching inverter topology that is most suitable for high power induction motor drive applications. To make the optimal selection EMI comparison of the switching losses presented. To verify the proposed design procedure, detailed simulation analysis with theoretical and experimental approaches have been done using laboratory prototype.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.304-308
• /
• 2001

This paper presents a novel prototype of ZCS-PFM high frequency series resonant inverter using IGBT power module for electromagnetic induction eddy current-heated roller in copy and printing machines. The operating principle and unique features of this voltage source half bridge inverter with two additional soft commutation inductor snubber are presented including the transformer modeling of induction heated rolling drum. This soft switching inverter can achieve stable zero current soft commutation under a discontinuous and continuous resonant load current for a widely specified power regulation processing. The experimental results and computer-aided analysis of this inverter are discussed from a practical point of view.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.45-48
• /
• 2003

Recently the PDP is the most remarkable media for a next generation display device. In this paper, we proposed the PDP dedicated DC-DC converter using a new soft switching method because the PDP has a lot of power dissipation so we need to develope. The proposed converter using one transformer has soft switching and a advantage to lower voltage stress in switch and also is predicted to have high power efficiency. we proposed the principles and theory using the zero voltage switching and verified the validity through a simulation.