• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.506-514
• /
• 2020

The current study stresses on the reuse of waste lignocellulose biomass (rice husk and sugarcane bagasse) for the synthesis of carboxymethyl cellulose (CMC) and further conversion of this CMC into a biodegradable film. Addition of commercial starch was done to form biodegradable film due to its capacity to form a continuous matrix. Plasticizers such as Glycerol and citric acid were used to provide flexibility and strength to the film. Biopolymer film obtained from sugarcane bagasse CMC showed maximum tensile strength and elongation in comparison to the film synthesized from commercial CMC and CMC obtained from rice husk. It has been observed that an increase in sodium glycolate/NaCl content in CMC imposed an adverse effect on tensile strength. Opacity, moisture content, and solubility of the film increased with a rise in the degree of substitution of CMC. Therefore, CMC obtained from sugarcane bagasse was better candidate in preparing biopolymer/biocomposite film.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.244-250
• /
• 1994

Starch phosphates were prepared by dry heating method using sodium triphosphate as a substitution reagent and their physicochemical properties were investigated with the chucheongbyeo and samkangbyeo. The solubility and swelling power of rice starches were increased by phosphorylation reaction. The solubility of the chucheongbyeo was greater than that of samkangbyeo , but the swelling power was appeared in vice versa. The transparency of raw starch was increased at the 6$0^{\circ}C$, but phosphorylated rice starch was begun to increase from 5$0^{\circ}C$. Light transmittance was higher inthe phosphorylate drice starch. The lightness of phosphyorylated rice starch decreased more than that of raw starch. Whereas the yellowness of phosphorylated rice starch increased. The temperature of initial gelatinization of the phosphorylated chucheong and samkang rice starch was shown to 5$0^{\circ}C$ and 53$^{\circ}C$, respectively. lowering 14-15$^{\circ}C$ in temperatureby the phosphorylation . The viscosity as well as by the phosphorylation reaction was raised 7.4-8.4 times, respectively. The hardness, adhesiveness, cohesiveness and texture which is rheological properties of starch gel increased by the phosphoryulation reaction. The chucheong rice starch gel was slightly higher in its rheolgocial values thanthat of the samkang rice starch gel. The rice starch particles were shown to polygonal structure, but they were deformed in the phosphorylated starch.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.3
• /
• pp.71-74
• /
• 2009

Electroplated Cu is a cost efficient metallization method in microelectronic packaging applications. Typically in 3-D chip staking technology, utilizing through silicon via (TSV), electroplated Cu metallization is inevitable for the throughput as well as reducing the cost of ownership (COO).To achieve a comparable film quality to sputtering or CVD, a pre-cleaning process as well as plating process is crucial. In this research, atmospheric plasma is employed to reduce the usage of chemicals, such as trichloroethylene (TCE) and sodium hydroxide (NaHO), by substituting the chemical assisted organic cleaning process with plasma surface treatment for Cu electroplating. By employing atmospheric plasma treatment, marginally acceptable electroplating and cleaning results are achieved without the use of hazardous chemicals. The experimental results show that the substitution of the chemical process with plasma treatment is plausible from an environmentally friendly aspect. In addition, plasma treatment on immersion Sn/Cu was also performed to find out the solderability of plasma treated Sn/Cu for practical industrial applications.

• Korean Journal of Food Science and Technology
• /
• v.21 no.3
• /
• pp.435-440
• /
• 1989

The present study was attempted to investigate the mutagenicities of carbonyl compounds(methyl glyoxal, glyoxal, diacetyl, dihydroxyacetone, glycolaldehyde, glyceraldehyde and furfural) derived from Maillard reaction toward Salmonella typhimurium TA 100(base-substitution mutant) without metabolic activation . And for further Investigation of mutagenicity mechanism including desmutagenicity, active oxygen scavengers (cysteine, ${\alpha}-tocopherol$, tris (hydroxymethyl) aminomethane, catalase, ascorbic acid) and reducing agents (glutathione, sodium bisulfite) were also used. Among carbonyl compounds tested, methyl glyoxal, glyoxal, dihydroxyacetone, glycolaldehyde and glyceraldehyde exhibited mutagenicities, and methyl glyoxal showed the strongest mutagenic activity. On the other hand , the mutagenicities of carbonyl compounds were significantly suppressed by cysteine, tris (hydroxymethyl) aminomethane, glutathione and sodium bisulfite. Also, these active oxygen scavengers and reducing agents alone did not show mutagenicity in the present study.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.440-444
• /
• 1998

Poly(phenylene sulfide-co-phenylene sulfide sulfone), PPS/PPSS copolymers were synthesized from p-dichlobenzene(DCB), p-dibromobenzene(DBB), p-diiodobenzene(DIB), 4-chlorophenyl sulfone(CPS) and sodium sulfide as comonomers under high temperature and pressure utilizing N-methyl-2-pyrrolidinone(NMP) as solvent. The yield of PPS/PPSS copolymer shoed maximum at $190^{\circ}C$ with [DBB]/[CPS] and [DIB]/[CPS] comonomer pair, while [DCB]/[CPS] pair exhibited maximum yield at $230^{\circ}C$. The change of yield is in the order of I>Br>Cl as leaving groups were in accordance with nucleophilic aromatic substitution reaction mechanism suggested for the synthesis of PPS type polymers. The molecular weight of PPS/PPSS copolymer was the highest($M_w=8,330g/mol$) with [DBB]/[CPS] comonomers in which [CPS] was 10 mole%. The PPS/PPSS copolymer made with 10 mole% of [CPS] showed about $15^{\circ}C$ higher $T_g$ and $15^{\circ}C$ lower $T_m$ than those of PPS homopolymer, which may be useful from the processing and thermal property point of view. The PPS/PPSS copolymer with 30 mole% of CPS or above did not exhibit Tm. The PPS/PPSS copolymer obtained with comonomer feed ratio of [DBB]/[CPS] = 95/5 mole% under $240^{\circ}C$ showed even higher molecular weight($M_w=10,300g/mole$) than PPS homopolymer made under similar reaction condition, retaining high crystallinity and thermal stability.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.380-385
• /
• 1990

This study was conducted to determine the relative saltiness of $MgCl_2,\;K_{2}SO_4$ and KCl and evaluate the sensory characteristics of solutions and Kakdugi (Korean seasoned pickles of cubed radish roots) prepared with reduced amount of sodium chloride by replacement with varying levels of KCI. The relative saltiness of $MgCl_2$ and $K_{2}SO_4$, were $0.11{\sim}0.12(0.115)$ and $0.08{\sim}0.09(0.085)$ respectively, at the reference level of 0.5% NaCl. The relative saltiness of KCI varied from 0.52 to 0.76 as the reference level increased from 0.5 to 2.0% NaCl. The result of sensory evaluation on the mixed solutions of NaCl and KCI indicated that bitterness, metallic flavor and astringency increased with the increased levels of KCI. The addition of KCI slightly increased the firmness of kakdugi but there was no significant difference in firmness by the amount of substitution. Bitterness and off-flavor was enhanced with the increased levels of replacement especially when the level was higher than 50%. Saltiness, sourness and overall desirability decreased as the extent of the replacement increased. There were no significant difference in pH, acidity and firmness measured with Universal Testing Machine. The result of this study indicate that the replacement of NaCl with KCI at not more than 50% does not affect greatly the characteristics of kakdugi.

• Journal of the Korean Chemical Society
• /
• v.49 no.6
• /
• pp.560-566
• /
• 2005

Sintered ceramic samples of pure and some copper doped layered sodium lithium tri-titanate ($Na_{1.9}Li_{0.1}Ti_{3-X}Cu_XO_{7-X}$) materials with different dopant molar percentages (0.0$Cu^{2+}$ at $Ti^{4+}$ sites in the lattice is proposed in this paper. Furthermore, three distinct regions have been identified in log(${\sigma}_{d.c.}T$) versus 1000/T plots. The lowest temperature region is attributed to electronic hopping conduction(polaron) for all copper doped derivatives and ionic conduction for lithium substituted $Na_2Ti_3O_7$.The mechanism of conduction in the intermediate region is associated interlayer ionic conduction and in the highest temperature region is associated modified interlayer ionic conduction.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.81-87
• /
• 2019

In this study, synthetic methods and physical properties for a new class of glycidyl azide polymer (GAP) were investigated for energetic thermoplastic elastomers (ETPE). Four kinds of GAP copolymer polyols were synthesized by introducing nucleophiles such as azide, alkoxide and alkyl amine into poly(epichlorohydrin) (PECH). The GAP copolymer synthetic reaction can be evaluated as an environmental benign and efficient synthetic method due to the simultaneous one-step reaction using two kinds of nucleophiles and the complete consumption of sodium azide. The relative stoichiometric substitution ratio analysis and the progress of reaction were checked and monitored by inverse gated decoupled $^{13}C$ NMR and Fourier transform infrared (FT-IR) spectroscopy. The glass transition temperature and molecular weight were measured by differential scanning calorimetry (DSC) and gel permeation chromatography (GPC) analysis. The synthesized poly($GA_{0.8}-butoxide_{0.2}$), poly($GA_{0.7}-n-butylamine_{0.3}$), poly($GA_{0.7}-dipropylamine_{0.3}$) and poly($GA_{0.7}-morpholine_{0.3}$) had a glass transition temperature ranged from -39 to $-26^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.142-147
• /
• 2010

Cryptand resins have been synthesized from 1-aza-18-crown-6 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene copolymer with crosslinkage of 1%, 2%, 10%, and 18% by substitution reaction. The synthesis of these resins was confirmed by the content of chlorine, element analysis, surface area (BET), and IR-spectroscopy. The effects of pH, time and crosslinkage on adsorption of metal ion from water fire extinguishing agentby synthetic resin adsorbent were investigated. Metal ions showed a great adsorption over pH 3 and adsorption equilibriumof metal ions was about two hours. The adsorption selectivity determined in water was in the increasing order of sodium ($Na^{1+}$) > zinc ($Zn^{2+}$) > chromium ($Cr^{3+}$) ion. The adsorption was in the order of 1%, 2%, 10%, and 18% crosslinkage resin.

• Journal of the Korean Ceramic Society
• /
• v.53 no.3
• /
• pp.282-287
• /
• 2016

This study involves enhancing the performance of the $Na(Li,Ti)O_2$ system as an Na-ion battery anode with the addition of Mg, which partially replaces Li ions. We perform both computational and experimental approaches to achieve a higher reversible capacity and a faster transport of Na ions for the devised system. Computational results indicate that the $Na(Li,Mg,Ti)O_2$ system can provide a lower-barrier path for Na-ion diffusion than can a system without the addition of Mg. Experimentally, we synthesize various $Na_z(Li_y,Mg_x,Ti)O_2$ systems and evaluate their electrochemical characteristics. In agreement with the theoretical study, Mg addition to such systems improves general cell performance. For example, the prepared $Na_{0.646}(Li_{0.207}Mg_{0.013}Ti_{0.78})O_2$ system displays an increase in reversible capacity of 8.5% and in rate performance of 13.5%, compared to those characteristics of a system without the addition of Mg. Computational results indicate that these improvements can be attributed to the slight widening of the Na-$O_6$ layer in the presence of Mg in the $(Li,Ti)O_6$ layer.