• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.131-155
• /
• 1983

Though it has been widely known the nitrogen effects are influenced by soils, varieties, and mineral nutrients in the rice culture, few analyses in relation to the factors increasing nitrogen effect have been studied in Korea. The effects of potassium and silica on the factors increasing nitrogen effects in paddy soils were investigated in accordance with soil improvement practices and nitrogen application methods for the cultivated varieties. The results obtained are as follows. 1. For 413 paddy fields, the yield from soils without nitrogen application ranged from 200 to 850kg/10a and that from nitrogen application did 350 to 1,051kg/10a. The yield increament by nitrogen application varied 50 to 650kg/10a depending on soils. 2. Soil chemical characteristics for high yield were different between with nitrogen and without nitrogen application. In the without nitrogen application, however, contents of organic matter, phosphorous, potassium and calcium of high yield soils were lower than those of low yield, while the available silica content was higher in the former. 3. The yield increased with nitrogen application up to 22.4kg/10a and thereafter it decreased. These phenomena were supposed to be not be decrease of nitrogen uptake but by lowered silica uptake. 4. Clay soil incorporation, deep plough, and inorganic constituents control such as Ca, Mg, and $Sio_2$ were effective as soil improvement praitices. It was appeared that increases of silica content and Ca/Mg ratio were important to increase nitrogen effects. 5. For the correlation between yield and yield components, it was high between yield and panicle in low nitrogen level and so was it between grain yield and ripening rate in high nitrogen. 6. In the urea and super granule urea application plot, recovery rate of nitrogen by plant and soil was high and yield was remarkable high. 7. Regardless of fertilizer types such as ammonium sulfate and urea, the residual nitrogen was about 4kg/10a in both plots of 5.8 and 11.6kg/10a. N applied. 8. The potassium application to soil enhanced the nitrogen efficiency. It was more effective in low potassium soil. 9. Optimum pH value for gel formation in the 4% sodium silicate solution was approximately 6.6. 10. It was suggested that silica could affect to rice plant growth as the inorganic and organic chemical components.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.9-18
• /
• 2013

The aim of this study is to provide the basic data for yacon [Samallanthus sonchifolius (Poepp. & Endl.) H. Robinson] in dietary food. The nutritional compositons, such as protein, ash, carbohydrate, dietary fiber, vitamin and fructooligosaccharide, were analyzed for 4 yacon germplasm lines. Yacon has low calories with only 46~56 kcal/100 g. The contents of water, fat, ash, protein, carbohydrate and dietary fiber were ranged 85.9~86.8%, 0.1~0.2%, 0.2~0.3%, 0.5~0.7%, 12.2~13.1% and 1.05~1.14%, respectively. The iodine-starch test did not show any color or precipitation reaction, which indicates that yacon has no starch content. However, in the absence of starch, yacon is rich in fluctooligosaccharide, which is between 9.6~11.1%. Maltose is present in the larger amount, followed by sucrose, glucose, and fructose in terms of free sugars. The analysis of minerals revealed that yacon contains potassium in the larger amount of 141~176 mg/100 g F.W., followed by magnesium at 8.2~10.6 mg, calcium, and sodium representing the least present mineral. Yacon proved to have a total of 17 types of amino acids, which are between 404.0~581.8 mg per 100 g of yacon. Glutamic acid, the main sweetening component, is present in the large amount of 94.0~182.2 mg/100 g F.W., followed by aspartic acid, arginine, and alanine. The proportion of the essential amino acid was 24.8~33.6%. Results of analysis also showed that yacon contains 0.001~0.024 mg, 0.03~0.11 mg, 0.02~0.3 mg, 0.3~0.4 mg and 14.1~20.6 mg of ${\beta}$-carotene, thiamin, riboflavin, niacin, and ascorbic acid, respectively. It is also likely to be highly used as functional food material in the future because it is abundant in both fluctooligosaccharide and antioxidants which are important functional components.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.97-106
• /
• 2000

In these respects the purpose of this research is manufacturing Co-W-P alloy thin film on the corning glass 2948 by electroless plating method using $NaH_2PO_2H_2O$ (sodium hypophosphite) as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction occurred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of 8$0^{\circ}C$. Also magnetic characteristics was found to be most excellent at the pH of 9 and the temperature of 7$0^{\circ}C$, resulting in the coercive force of 870Oe and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was 0.216$\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand, (1010), (0002), (1011) orientation of hcp for $\alpha$-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-W-P alloy thin film, coercive force was 500Oe and squareness was 0.6. For crystal orientation, (0002) orientation of $\alpha$-Co was dominatly found. Then we could confirm the formation of perpendicular magnetization. The content of P was constant at 0.8$\pm$0.2% and the content of W increased as the concentration of Na$_2$WO$_4$increased. When the concentration of Na$_2$WO$_4$was 0.1mol/L, the composition of W was 20%. We observed the changes of magnetic characteristics and microstructure of thin film depositions of Co-W-P by the heat treatment. For heat treatment, the temperature was increased step by step to 10$0^{\circ}C$, 20$0^{\circ}C$, 30$0^{\circ}C$, and 40$0^{\circ}C$ and it took 1 hour at each step in the reductive condition of hydrogen gas. By the heat treatment, flatness of surface was improved, but there were no changes on the magnetic characteristics and the microstructures.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.334-341
• /
• 2006

This study was to investigate the growth of planted red pine (Pinus densiflora S. et. Z.) seedling, soil properties and understory vegetation structure after fertilizer treatments [unfertilized plot (control), CF plot (Combination Fertilizer), UF plot (Urea Formaldehyde Fertilizer)] in a Pinus densiflora stand planted after the forest fires in Gosung, Gangwon province. The height growth rates of seedlings in four years were 264% in unfertilized, 404% in CF, and 388% in UF plots, respectively. The root collar diameters were increased 340% in unfertilized, 454% in CF, and 427% in UF plots, respectively. No significant changes occurred in soil total nitrogen and potassium ion ($K^+$) with the fertilization. However, available $P_2O_5$, content in the soil surface (0-15 cm) increased with the fertilizer application. Soil organic matter increased significantly with fertilizer treatments, while gradual decrease occurred in unfertilized plots. Sodium ion ($Na^-$) decreased in all sites. Soil pH, CEC, calcium ion ($Ca^{2+}$) and magnesium ion ($Mg^{2+}$) contents were not significantly different among treatments. Although Shannon's species diversity index and species richness in understory vegetation did not change with fertilizer treatments, vegetation cover rates in forest floor increased significantly with the fertilization. These results suggest that the increase of pine seedling growth and vegetation cover rates with fertilization could enhance soil stabilization in forest tire areas.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.468-474
• /
• 1993

A dehydrating sheet comprises polymeric water absorber. which are packed in a semipermeable cellophane film bag allowing selective permeation of water. This sheet dehydration is quite different from conventional drying method such as sun drying, hot-air blast drying and cold air blast drying in a sense that samples are dried without heat treatment. As a part of the studies to develope a new processing method for effective utilization of dark muscle fishes, the preparation of a good quality salted and semi-dried mackerel by the dehydrating sheet was attempted. The dehydration time for preparation of a salted and semi-dried mackerels containing approximately equal moisture content were revealed $180{\sim}510min$ in conventional drying method and $90{\sim}160min$ in this sheet dehydration, respectively. The moisture and histamine contents of those salted and semi-dried mackerels were $59.4{\sim}62.4%$ and $2.5{\sim}3.6 mg/100g$, respectively. The changes in peroxide value, fatty acid composition, brown pigment formation, myofibrillar protein solubility and Ca-ATPase activity during processing of the salted and semi-dried mackerel prepared by the sheet dehydration were more lower than those of products prepared by conventional drying methods. Therefore, these result showed that the quality of a salted and semi-dried mackerel prepared by the sheet dehydration was imperial to that of those products by conventional drying method.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.36-42
• /
• 2005

The purpose of this study was to investigate the component and quality characteristics of green tea. Four kinds of green tea powder obtained from Hwagae area were evaluated the component of carbohydrates, protein crude fat and crude ash. Also the content of ascorbic acid, minerals and polyphenols in green tea powder were evaluated. Quality characteristics of green tea powder was evaluated by Hunter's colur value and sensory evaluation. Green tea was composed of $9.2\~11.8\%$ of moisture, $4.9\~6.1\%$ of crude ash, $5.2\~6.1\%$ of crude fat, $22.5\~26.4\%$ of protein and $50.4\~55.1\%$ of cabohydrates. The content of total ascorbic acid in green tea powder was $312\~392mg/100g$ and dehydiuascorbic acid was $157\~176mg/100g$. The contents of minerals in green tea powder sodium was $340\~580mg/100g$, magnesium was $242\~320mg/100g$, potassium $223\~278mg/100g$ me calcium $145.7\~238.7mg/100g$. Polyphenol content of green tea powder was $7.8\~9.3\%$ which was the highest in A and the lowest in B. Hunters color values of green tea, lightness(L) was $52.3\~69.6$, redness(a) was $0.11\~-5.61$, yellowness(b) was $14.23\~23.34$, which were better in green tea C and D than green tea A and B. From sensory evaluation of green tea powders, green tea D obtained the significant highest scores in color, flavor and overall quality(p<0.05) and followed by green tea C, Green tea powder C and D which have high levels of protein and ascorbic acid were evaluated as good quality in color and sensory evaluation.

• Food Science and Preservation
• /
• v.21 no.5
• /
• pp.676-687
• /
• 2014

This study investigated the quality changes in cabbage brined with deep sea water salt and in a commercial brined cabbage product. The subject cabbages were separated into two groups: those manufactured in the Lab (ML) and the commercial brined cabbage product (CP). Each group had three brining treatments: with sun-dried salt (S, CS), refined salt (R, CR), and deep sea water salt (D, CD). The salinity level of the ML group was 2.1~2.3%, higher than that of the CP group (1.1~1.5%). The total plate count (TPC) was detected as 5.0 log CFU/g with the S, R, and D treatments at Day 7, but the growth rate of the TPC with the CS, CR, and CD treatments was faster than that with the S, R, and D treatments (6.9~7.7 log CFU/g). A lactic acid bacteria (LAB) level of 5.0~6.6 log CFU/g was also detected in the S, R, and D samples, but only 7.0~7.6 log CFU/g was detected in the CP groups at Day 14. The instrumental hardness levels of the cabbage brined with the deep sea water salts (D and CD) were 3,971 g and 3,932.4 g, respectively, which were significantly higher than those of the samples that were salted with sun-dried salt and refined salt (p<0.05). As for the sensory attributes, S, D, and CD maintained their marketability scores until the end of the storage period for all the properties. CD presented the highest total free amino acid (478.9 mg%), glutamic acid (107.0 mg%), citric acid (428 mg%), and sodium (189 ppm) contents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.2
• /
• pp.182-187
• /
• 1985

This study was attempted to evaluate the chemical components of Aldaegu, Gadus macrocephalus, which consumed as a salted and dried product popularly in Korea. The contents of such compounds as amino acids, nucleotides and their related compounds, fatty acids and minerals were analysed. The content of total free amino acids was 814.9 mg% on dry basis and the major amino acids were tyrosine, alanine, histidine, leucine, phenylalanine, lysine and valine in a decreasing order. These amino acids were resulted as 45% of total free amino acids in Aldaegu. In the nucleotides and their related compounds, inosine and hypoxanthine were the only compounds detected. The overall content of nucleotide and their related nitrogenous compounds, free amino acid-N., ammonia-N., creatine and creatinine-N., and betaine-N., was 78.6% of extractable nitrogen. Ammonia-N was the most abundant of other nitrogenous compounds, resulting 36.6% of extractable nitrogen from the sample. In the fatty acid composition of total lipid and phospholipid, polyenoic fatty acid was abundant holding about 48% respectively. However, higher amounts of saturated fatty acids(39.8%) were found in glycolipid, and the predominant fatty acids in quantity were palmitic $acid(C_{16:0})$, stearic acid $(C_{18:0})$, oleic $acid(C_{18:1})$, docosahexaenoic $acid(C_{22:6})$, eicosapentaenoic $acid(C_{20:5})$ and eicosatetraenoic $acid(C_{20:4})$. Aldaegu contained 27,430 ppm of sodium and the trace amount of lead and cadmium was detected, which gave a good safety in the food sanitation aspects. It was presumed that free amino acids, ammonia, hypoxanthine, betaine, creatine and creatinine, and minerals play an important role for the characteristics of taste and flavor of Aldaegu.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.4
• /
• pp.435-441
• /
• 2017

The present study was carried out to evaluate the applicability of Tenebrio molitor larvae (mealworm) as a health functional food material in order to contribute to the development of the domestic insect industry and health functional food industry. Protein hydrolysates were prepared from mealworm powder by enzymatic hydrolysis using five different proteases (alcalase, bromelain, flavourzyme, neutrase, and papain), and the hydrolysates were then tested for their antioxidant activities. Based on available amino group contents and sodium dodecyl sulphate-polyacrylamide gel electrophoresis analyses, mealworms treated with alcalase ($4,781.39{\mu}g/mL$), flavourzyme ($5,429.35{\mu}g/mL$), or neutrase ($3,155.55{\mu}g/mL$) for 24 h showed high degree of hydrolysis (HD) value, whereas HD values of bromelain ($1,800{\mu}g/mL$) and papain-treated ($1,782.61{\mu}g/mL$) mealworms were much lower. Protein hydrolysates showing high HD values were further separated into > 3 kDa and ${\leq}3kDa$ fractions by a centrifugal filter system and then lyophilized, and the production yields of the low molecular weight protein hydrolysates (${\leq}3kDa$) by alcalase, flavourzyme, and neutrase were 42.05%, 26.27%, and 30.01%, respectively. According to the RC_{50} values of the protein hydrolysates (${\leq}3kDa$) obtained from three different antioxidant analyses, all three hydrolysates showed similar antioxidant activities. Thus, alcalase hydrolysates showing the highest production yield of low molecular weight protein hydrolysates were further tested for their inhibitory effects on peroxidation of linoleic acid by measuring thiobarbituric acid values, and the results show that peroxidation of untreated linoleic acid increased dramatically during 6 days of incubation. However, pretreatment with the hydrolysates ($100{\sim}800{\mu}g/mL$) significantly inhibited linoleic acid peroxidation in a dose-dependent manner over 6 days.