• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1138-1140
• /
• 2003

To investigate the relation between the sintering degree and the elastic modulus of sintered glass, ball-milled commercial soda-lime-silica glass were used. It was heat-treated at various temperatures and for various times, and then the density and elastic modulus of sintered glass frit were measured. The experimental results showed a strong correlation between them.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1052-1055
• /
• 2001

In micro-drilling of brittle materials including glass, cracks occur at the exit surface. In drilling glass, the main type of crack is cone crack. Cone crack is generated by thrust force acting at the bottom surface of the workpiece. Cone crack size could be reduced by changing cutting conditions, but cone crack still existed. Two methods were proposed to prevent crack formation and perfect hole shapes were obtained. One method is attaching two glass plates with water and the other method is constraining two glass plates. The proposed methods eliminated tensile stress acting on the exit surface of glass and prevented crack propagation.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.382-390
• /
• 2013

Foaming process of waste soda lime glasses by just chemical composition control of vitreous feed materials was investigated to find a novel and efficient recycling process. For the chemical composition control of feed materials, 10 wt. parts of $SiO_2$, 0.5 wt. parts of $Na_2SO_4$, 3.0 wt. parts of $B_2O_3$, and 0.3 wt. parts of carbon black as the foaming agent were mixed with 100 wt. parts of soda-lime vitreous feed powder. Proper conditions for foaming process in tunnel kiln are the foaming temperature of $830{\sim}850^{\circ}C$, the foaming time of 30~35 min, and the vitreous feed powder particle size of -325 mesh. Properties of foamed glass blocks obtained under these foaming conditions showed the density of $0.17{\sim}0.21g/cm^3$, thermal conductivity of $0.06{\pm}0.005kcal/h{\cdot}m{\cdot}^{\circ}C$, moisture absorption of 1.1~1.5%, and compressive strength of $20{\sim}30kgf/mm^2$.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.137-139
• /
• 2015

In this study, we examined the influence of molten $KNO_3$ flow on mechanical properties and their deviation when a chemical toughening process was applied to soda lime silicate glass ($Na_2O-CaO-SiO_2$). $KNO_3$ melt flow was controlled using three methods: (1) glass tray rotation, (2) impeller stirring, and (3) natural convection. DOL and hardness were found to be enhanced by tray rotation because this rotation was able to maintain the concentration around the glass surface, in contrast to other methods. However, there did not appear to be a statistically significant difference in the 3-point bending strength for the three flow conditions due to the ground edge condition.

• Journal of the Korean Ceramic Society
• /
• v.18 no.2
• /
• pp.112-118
• /
• 1981

A study was made on the processing of domestic blast furnace slag by flotation and chemical purification for the use of slag as a raw material in making soda lime glasses. Feasibility study has been made for the use of reprocessing slag as a source material for both coloring and chemical components (such as CaO, $Al_2O_3$, MgO and etc.) in the glass making process. Chemical composition of chemically purified slags ranges; $SiO_2$ 34.5~37.5, $Al_2O_3$, 16.2~14.1, $Fe_2O_3$ 0.33~0.14, CaO 34.5~38.8, MgO 4.0~5.2, NmO 0.16~0.39, $TiO_2$ 0.23~0.35, S 0.08~0.42, ignition loss 3.3~8.4 and others 0.48~0.51%. It was found that either amber or greenish color could be easily obtained with the addition of salg up to 24%, however the slag addition to glass batches much impaired the transmitancy of glass products, thus a glass made with 7% slag addition showed 82% in transmitancy value at 510 nm.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.519-526
• /
• 2005

Hydrolysis of soda-lime waste glass was investigated to test the feasibility for use of waste glass as feed material in the production of foamed glass. The soda-lime glass, such as plate glass and various bottle glasses, was effectively hydrolyzed by steam and water under high pressure. The proper condition for the hydrolysis was found to be reaction temperature of $250^{\circ}C$ and reaction time of 2 h. Under this condition, the water content of hydrated glass through hydrolysis was 7.85~10.04%, allowing successful foaming process for production of foamed glass. Using Na as the modifying agent of glass was effective in the hydrolysis by water. The highest water content of hydrated glass was obtained when weight ratio of NaOH to the glass was 0.04.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.15-27
• /
• 2004

The first aim of mass product of glass in Automatic bottle glass industry is to decrease the cost and to increase the quality. Second, the cullet is how widely used to save the energy and reducing of ecomaterials. However the physical and chemical properties of Soda-lime glass would be come true at the lower than 2% $Al_2 O_3$. Unfortunately the $Al_2 O_3$ contents of domestic silica is greater than 4% Since small glass class than 200ml bottle is made in domestic silica the producting efficiency would be decreased due to the defect such as cord, knot, devitrite, pore etc. There are many problems such as devitrifiacation and deteriorated effect on production in glass industry became of increasing of plate glass cullet. It is tried to solve these kinds of problems using various analysing methods in this experiments.

• Composites Research
• /
• v.13 no.4
• /
• pp.75-82
• /
• 2000

A small diameter steel-ball impact experiment was performed to study the impact resistance of the surface of glass plates bonded with glass fabric/epoxy lamina. Five kinds of materials were used in this study: soda-lime glass plates, glass/epoxy lamina(one layer)-bonded and unbonded glass plates, glass/epoxy lamina(three layers)-bonded and unbonded glass plates. The range of impact velocity was 40 120m/s. The maximum stress and absorbed fracture energy were measured on the back surface of glass plates. With increasing impact velocity, various types of surface cracks such as ring, cone, radial and lateral cracks took place in the interior near the impacted site of glass plates. The cracks drastically decreased with glass/epoxy lamina coating. The surface fracture behavior could be evaluated using the maximum stress and the absorbed fracture energy.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.141-141
• /
• 2001

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.481-486
• /
• 2008

The different degrees of blackening were observed at the inner surface of borosilicate, soda-lime, and aluminosilicate glass tubes having different sodium (Na) contents. The sodium contents ($Na_2O$) within the borosilicate, soda-lime, and aluminosilicate glass tubes were found to be 4%, 14%, and 0.06%, respectively. The degree of blackening was shown to increase as the sodium content within the glass of the fluorescent lamp containing Ne+Ar+Hg gas mixture. Higher degree of blackening was observed from the inner surface of the glass tube coated with $Y_2O_3$. The blackening was found to be originated from the amalgam of $NaHg_2$ generated by the chemical reaction between the mercury ions within the discharge gas and sodium within the glass tube during operation.