• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.98-102
• /
• 2004

단일이온교환 프로세스를 도입하여 soda-lime-silicate 유리에 있어서의 이온교환 거동 및 물성변화를 관찰하였다. 온도 및 시간 변화에 따라 K/sup +/ 이온의 침투깊이, 이온교환량은 증가하였으며, 이에 비례하여 밀도, 굴절률도 증가하는 경향을 보였다 이온교환 과정에서 생성된 비가교 산소로 인하여 400nm에서 흡수 현상이 관찰되었으며, 열팽창계수는 구조의 치밀화와 이력현상에 영향을 받았다.

• 자원리싸이클링
• /
• 제32권2호
• /
• pp.52-58
• /
• 2023

본 연구에서는 석회석 활용분야 확대를 위해 소석회를 이용한 소다라임 제조 기초 실험을 실시하였다. 소다라임 제조를 위해 압출식 방식과 디스크 방식의 펠렛타이져를 이용하였으며, 첨가제로 벤토나이트를 투입하여 제조한 소다라임의 이산화탄소 흡수 특성을 평가하였다. 실험결과, 제조 방식에 관계없이 이산화탄소와의 반응에 따라 소다라임에서 CaCO₃의 peak가 확인되었으며, 방해석과 아라고나이트가 함께 생성된 것을 확인하였다. 디스크 방식으로 제조한 소다라임이 압출방식에 비해 더 큰 비표면적을 나타내었고, 벤토나이트를 첨가한 조건에서도 비표면적이 향상되었다. 비표면적이 향상된 시료 조건에서 이산화탄소 흡수율이 증가되는 것으로 확인되었다.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.18-25
• /
• 1997

The various deformation and fracture behaviors under light loads in soda-lime glass under sliding Vickers indentation have been studied. In soda-lime glass, deformation and fracture behaviors can be classified into four different patterns by applied load. At very light load (<0.1N), plastic deformation only occurred. At low loads (0.1~0.8N), median crack, appear. At intermediate loads (0.8~3.0N), median and lateral cracking occurred leading to a large chipping. At high loads (3.0~6.0N), a crushed zone was observed with median crack. The friction experiment finds that the increasing in the friction coefficients coincides with the onset of crushing in soda-lime glass.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2002년도 추계학술발표대회 논문개요집
• /
• pp.37-40
• /
• 2002

• Carbon letters
• /
• 제2권2호
• /
• pp.113-119
• /
• 2001

The advanced method for $CO_2$capture is currently one of the most important environmental issues in worldwide and it is therefore necessary to have available technologies, which minimize the discharge of $CO_2$ including Carbon-14 from nuclear facilities into the atmosphere. A key aspect of this work is to provide the technically principal data required to improve a $CO_2$ removal system for the utilization of regenerative sorbent use, specifically include suggestions regarding its modified column design (parallel dual-bed assembly), stop-restart operation and the economic feasibility of sorbent use. The removal performance of soda lime and the effects of relative humidity (RH) and packing bed-depth (BD) on $CO_2$ removal were investigated. In a single-bed, it revealed that the utilization of soda lime for $CO_2$ removal at line velocity of 13 cm/sec and bed depth of 12 cm increased with the increased relative humidity up to 85%. However, in the parallel dual-bed assembly applied with the stop-restart operation, a maximum utilization rate of soda lime for $CO_2$ removal was obtained even at 55% of RH and 8 cm of BD, specifically the utilization rate of soda lime by using this $CO_2$ removal assembly was about two-fold superior to that in a single-bed.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4173-4179
• /
• 2012

From Neungsalli Temple located in Buyeo, ancient glass vessel fragments were discovered along with hundreds of glass beads. In this research, we used SEM-EDS to analyze glass vessel fragments and beads excavated from Neungsalli Temple. Then, we analyzed their chemical composition and examined their characteristics. In particular, we investigated a relationship between glass vessels from Neungsalli temple and Hwangnamdaechong (South tomb). The result of our experiment showed that the glass artifacts from Neungsalli temple were all soda glass. To be specific, the vessel fragments were soda-lime glass and spherical beads were high-alumina soda glass. Then, we compared glass vessel fragments from Neungsalli temple to glass vessels excavated from Hwangnamdaechong. Glass vessels from both sites turned out to be soda lime glass. We classified them further based on raw material used for soda - natron and marine plant ash.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.373-376
• /
• 2008

New glass compositions for lead free, low temperature sealing glass frit was examined in $ZnO-V_2O_5-P_2O_5$ glass system which can be used sealing material for PDP to be made of soda lime glass substrates. Among many glass compositions, KFS-C glass showed low glass transition point (Tg) and good fluidity and adhesion characteristics when it was tested by flow button method at low temperature of $420^{\circ}C$. Its Tg was $317^{\circ}C$ and thermal expansion coefficient (CTE) was $70{\times}10^{-7}/K$. The glass frit was mixed with an organic vehicle to make a paste and it was dispensed and sealed with soda lime glass substrates at $420^{\circ}C$ for 10min. Sealed glass panels also showed good adhesion strength even sealed at low temperature of $420^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제8권2호
• /
• pp.69-76
• /
• 1976

핵연료 재처리 과정이나 원자력발전소에서 대량으로 발생되는 비교적 반감기가 긴 핵종들(Sr-90, Ru-106, Cb-137, Ce-144)의 화학응집제와 국산점토 광물(montmorillonite)에 의한 제거 효율을 결정하기 위해 본 실험이 수행되었다. Phosphate process는 Ce-144의 제거에 있어서 99.5% 이상의 극히 좋은 효율을 나타냈고, lime-soda process는 Sr-90에 대하여 93%의 높은 제거율을 보였으며, Cs-187에 대해서는 copper-ferrocyanide가 제거율 99%의 매우 적절한 화학 응집제임을 나타냈다. Phosphate나 lime-soda process에서 가장 좋은 제거효율은 PH 11 이상에서 얻어졌다. 그리고 NaCl로 처리된 montmorillonite가 방사성 핵종들은 제거하는데 있어서 natural montmorillonite 보다 향상된 제거 효율을 보여주었다.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.31-35
• /
• 2018

Tungsten disulfide($WS_2$) thin films were directly deposited by direct-current(DC) sputtering and annealed by rapid thermal processing(RTP) to materialize two-dimensional p-type transition metal dichalcogenide (TMDC) thin films on soda-lime glass substrates without any complicated exfoliation/transfer process. $WS_2$ thin films deposited at various DC sputtering powers from 80 W to 160W were annealed at different temperatures from $400^{\circ}C$ to $550^{\circ}C$ considering the melting temperature of soda-lime glass. The optical microscope results showed the stable surface morphologies of the $WS_2$ thin films without any defects. The X-ray photoelectron spectroscopy (XPS) results and the Hall measurement results showed stable binding energies of W and S and high carrier mobilities of $WS_2$ thin films.

• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.39-45
• /
• 2008

Titanium and its alloys are widely used as dental implants materials because of their excellent mechanical properties. However, the alumina and zirconia ceramics are preferred to use as the substitute of Ti implants because there is a problems in esthetics and biocompatibility in Ti implant. The the glass infiltrated alumina ceramics are studied to increase the toughness and biocompatibility. The 45S5 and soda-lime glass powder was mixed with ethanol at ratio of 1:1 and brushed on the surface of alumina. Then it was heat treated in the electric furnace at $1400^{\circ}C$ from 30 min. to 5 hours. The glass powder was controlled from 200 to $350{\mu}m$ using ball milling. After heat treatment, the glass infiltrated specimen was tested in universal testing machine to measure the bending strength. The surface microstructure of each specimen was observed with SEM. The biocompatibility of 45S5 and soda-lime glass coated alumina was investigated using PBS at $36.5^{\circ}C$ incubator. The specimen was immersed in PBS for 3, 5, 7, 10 days. After that, the surface morphology was investigated with SEM. As the results of experiment, the 45S5 bioglass infiltrated alumina show the increase of bending strength according to the increasing of heat treatment time from 30 min. to 5 hours at $1400^{\circ}C$ Finally the 1370N bending strength of alumina increased to 1958N at 5 hours heat treatment, which shows 1.4 times higher. In contrast to this, the soda lime glass infiltrated alumina ceramics shows the convex curve according to heat treatment time. Thus it shows maximum bending strength of 1820N at 1 hour heat treatment of $1400^{\circ}C$ It gives 1.3 times higher. However, the bending strength of soda lime glass infiltrated alumina is decreasing with increasing heat treatment time after 1 hour. The precipitation on the surface of 45S5 glass infiltrated alumina was revealed as a sodium phosphate ($Na_{6}P_{6}O_{24}6H_{2}O$) and the amount of precipitation is increasing with increasing of immersion time in PBS. In contrast to this, there is no precipitation are observed on the surface of soda lime glass infiltrated alumina. This implies that 45S5 glass infiltrated alumina brings more biocompatible when it is implanted in human body.