• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.533-535
• /
• 2018

As the use frequency of electronic communication equipment increases due to the influence of the 4th industrial revolution, the importance of image and signal processing is increasing. However, due to noise caused by various causes, the reliability of the equipment is degraded and malfunctions are caused. In this paper, we propose an algorithm to remove AWGN in most environments. The existing methods show relatively poor performance due to the smoothing phenomenon at the boundary of the image. To overcome this problem, we proposed a filter algorithm that adapts to the boundary region using the Sobel edge detection to remove the noise. And using the PSNR compared with traditional methods, such as to demonstrate the performance of the proposed algorithm.

• Korean Journal of Remote Sensing
• /
• v.21 no.3
• /
• pp.213-219
• /
• 2005

In the Korean seas, Sea Surface Temperature (SST) and Thermal ronts (TF) were analyzed temporally and spatially during 8 years from 1993 to 2000 using NOAA/AVHRR MCSST. In the application of EOF analysis for SST, the variance of the 1st mode was 97.6%. Temporal components showed annual variations, and spatial components showed that where it is closer to continents, the SST variations are higher. Temporal components of the 2nd mode presented higher values of 1993, 94 and 95 than those of other years. Although these phenomena were not remarkable, they could be considered ELNI . NO effects to the Korean seas as the time was when ELNI . NO occurred. The Sobel Edge Detection Method (SEDM) delineated four fronts: the Subpolar Front (SPF) separating the northern and southern parts of the East Sea; the Kuroshio Front (KF) in the East China Sea, the South Sea Coastal Front (SSCF) in the South Sea, and the Tidal Front (TDF) in the West Sea. TF generally occurred over steep bathymetry slopes, and spatial components of the 1st mode in SST were bounded within these frontal areas. EOF analysis of SST gradient values revealed the temporal and spatial variations of the TF. The SPF and SSCF were most intense in March and October; the KF was most significant in March and May.

• Journal of the Korean Society of Radiology
• /
• v.2 no.2
• /
• pp.17-21
• /
• 2008

Image quality is improved if the high frequency domains of boundary surface are made distinct. We suggested a method of correcting indistinct defects in ultrasonic images resulting from dynamic imaging. According to the results of the experiment, boundaries in input ultrasonic images became distinct. However, we need to solve the problem that information on pixels of low signal intensity adjacent to boundaries is lost because high-frequency components in the boundaries are strong.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.836-841
• /
• 2016

An indoor positioning system using Wi-Fi is essential to produce a radio map that combines the indoor space of two or more dimensions, the information of node positions, and etc. in processing for constructing the radio map, the measurement of the received signal strength indicator(RSSI) and the confirmation of node placement information counsume substantial time. Especially, when the installed wireless environment is changed or a new space is created, easy installation of the node and fast indoor radio mapping are needed to provide indoor location-based services. In this paper, to reduce the time consumption, we propose an algorithm to distinguish the straight and curve lines of a corridor section by RSSI visualization and Sobel filter-based edge detection that enable accurate node deployment and space analysis using cable-type Wi-Fi node installed at a 3 m interval. Because the cable type Wi-Fi is connected by a same power line, it has an advantage that the installation order of nodes at regular intervals could be confirmed accurately. To be able to analyze specific sections in space based on this advantage, the distribution of the signal was confirmed and analyzed by Sobel filter based edge detection and total RSSI distribution(TRD) computation through a visualization process based on the measured RSSI. As a result to compare the raw data with the performance of the proposed algorithm, the signal intensity of proposed algorithm is improved by 13.73 % in the curve section. Besides, the characteristics of the straight and the curve line were enhanced as the signal intensity of the straight line decreased by an average of 34.16 %.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1051-1058
• /
• 2018

This paper propose image processing algorithm to prevent safety accidents near by subway platform screen door(PSD). First, edges of the subway PSD images are detected and the boundary line between PSD and subway platform is detected to decide people's approach to the PSD using Hough transform. To do this, we draw the boundary line between the PSD and platform, to detect the boundary line and to decide the people's approach to the detected line is completely connected or not. Generally, edge is the basic characteristic of image; thus, edge detection is very important in image processing applications and computer vision area. The conventional edge detection methods such as Roberts, Sobel, Prewitt, and Laplacian etc, which are using a fixed value of mask, and morphological gradient from the structuring element of view and Canny edge detector are widely used. In this paper, we propose the detection algorithm about the people's approach to the subway PSD to prevent the safety accidents by using Canny edge detector and Hough transform and the computer simulation shows the results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.97-101
• /
• 1987

The edge, a discontinuity or abrupt change in the gray-level or color, is a fundamentally important primitive feature of an image necessary for the image analysis and classification. Two-dimensional 3x3 compass gradient operators (ex. Sobel, Prewitt, and Kirsch operators)are commonly used in the edge detection and usually detect 8 compass directional components. In this paper, we present a new interpretation of the relationships between the resulting 8 gradient magnitudes and the 8 intensity values of neighboring pixels which are covered by the two-dimensional 3x3 mask. It is expected that a new gradient edge operator may be designed by changing the eigenvalues in the transform domain and the fast optical edge operator may be implemented by using the optical system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.2
• /
• pp.96-102
• /
• 2011

In this study, we performed algorithm development of automatic symptom degree for patient with hallux valgus one of the representative foot disease of morden. And this study proposes an efficient automated technique that is different from the original analog diagnosis for treatment and surgery of hallux valgus using digital image process. And we used X-Ray images of both a normal and a patient with hallux valgus in the procedure. First, we marked the standard angle on the X-Ray image of normal through Overlap & Add technique. Then we created a standard image through thinning filter and roberts filter(edge detection algorithm). Second, we used sobel filter of edge detection algorithm on the X-Ray image of patient. Moreover, we went another overlap & add technique procedure with both normal and patient image that we made. With the output, we projected the display detection image onto the screen. Finally, with the display detection image, we could measure and project the diagnosis angle of hallux valgus. And this confirms that this method is much more practical and applicable for another orthopedics disease than the prior one.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.901-908
• /
• 2016

Edge is the basic characteristic of image, edge detection is very important in image processing applications and computer vision area. Many studies are being performed to detect these edges by domestic and foreign researchers. The conventional edge detection methods such as Roberts, Sobel, Prewitt, and Laplacian etc, which are using a fixed value of mask are widely used and morphological gradient which uses dilation and erosion among morphology process techniques is also widely used. But these methods does not detect edges well in the diagonal direction or gradually changing image parts. Accordingly, in this paper, the modified top-hat and bottom-hat transform algorithms which are detecting edges well in the parts of diagonal direction or gradually changing image are proposed. The proposed algorithms present the detected edge images compared with the conventional methods and are evaluated performance by using cosine similarity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.934-938
• /
• 2000

This paper presents a laser cutting of 2D image. 2D image in pixel graphic format is converted into vector graphic image by image processing. Bitmap graphics are made easily, but can not being used in application works for geometry transition. The Sobel's Edge detection method is used to find boundary points on 2D image. The points are fitted into curves with sampling and filtering. Sampling can provide efficient computation and filtering reconstuct features in image. The NC code is generated on MURBS curve of the points. Also, the offset of contour and cutting conditions are considered.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.168-172
• /
• 2014

In this paper, we propose an algorithm that can efficiently detect and monitor multiple ships in real-time. The proposed algorithm uses morphological operations and edge information for detecting and tracking ships. We used smoothing filter with a $3{\times}3$ Gaussian window and luminance component instead of RGB components in the captured image. Additionally, we applied Sobel operator for edge detection and a threshold for binary images. Finally, object labeling with connectivity and morphological operation with open and erosion were used for ship detection. Compared with conventional methods, the proposed method is meant to be used mainly in coastal surveillance systems and monitoring systems of harbors. A system based on this method was tested for both stationary and non-stationary backgrounds, and the results of the detection and tracking rates were more than 97% on average. Thousands of image frames and 20 different video sequences in both online and offline modes were tested, and an overall detection rate of 97.6% was achieved.