• Korean Journal of Medicinal Crop Science
• /
• v.3 no.3
• /
• pp.240-245
• /
• 1995

This study was conducted to find out environment conditions in order to increase of growth and yield of tuberlets in pinellia ternata (Thunb.) Breit. The optimal temperature conditions for the growth of tuberlets were good rather temperature fluctuations than constant one and the optimal photoperiod was a 6hr-photoperiod. The growth of tuberlets to the kinds and concentration of growth regulators was good for 0. lppm 2.4- D, 10ppm kinetin and 50ppm gibberellin treatment. In colchicine soaking treatment, the growth of tuberlets was bad, but bulblets formation was good for 0. 05% colchicine treatment for 48hr. -soaking. In colchicine dropping treatment, dry tuber yield was good for 0. 1% colchicine treatment with once dropping for one day.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.7-13
• /
• 1975

In other to determine the optimum condition for the alkali digestibility test, the milling degree of samples,the concentrations of potassium hydroxide,the temperature and the length of time for soaking were discussed.The results obtained from these experiment are summarized as follows; 1.Over 90 minute-milled samples in a new test tube miller showes the stable alkali digestibility values. 2.The optimum conditions for the alkali digestibility test were shown as 1.8 percent for the simultaneous treatment of Indica and Japonica varieties,1.4 percent or below for only Japonica and/or soft group varieties,and 2.2 percent of KOH for only Indoca and/ot hard group varieties provided the temperature and soaking time were fixed at \;30^{\circ} and 18 hours respectively.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.2
• /
• pp.272-277
• /
• 2018

This research was conducted to elucidate the optimum conditions for the antibacterial activity of konjak jelly using the evolutionary operation-factorial design technique. In the first set of experiments, concentration of a coagulation agent, soaking liquid, and temperature of water were set to 0.4%, $0.6{\times}10^{-2}N$, and $65^{\circ}C$ as a central point, respectively. The highest antibacterial activity was acquired at E21, in which the number of bacteria was 1.25 log cfu/g. Because the code of changes in the main effect was (-), it could be decided that the central point of the first set was not the optimum point. Although antibacterial activity in the second set was improved, the values of the main effect were higher than that of changes in the mean effect. The central point of third set was concentration of coagulation agent 0.8%, concentration of soaking liquid $1.0{\times}10^{-2}N$, and temperature of water $65^{\circ}C$. It was found that the antibacterial activity of central point in the third set was highest among all the tested set. Further, all the necessary conditions were appropriate to reach the optimum condition. The antibacterial activity of the central point in third set was more than 1,000 times higher than that of E11, in first set.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.6
• /
• pp.545-553
• /
• 1993

The metalaxyl seed-soaking treatment markedly increased the root-mat formation of the young rice seedling(8- to l0-day-old) for machine transplanting. This experiment was conducted to find out a possible rooting mechanism of the young rice seedling in relation to the exogenous metalaxyl seed-soaking treatment. The rice seeds of Hwaseongbyeo variety were soaked in the solution of metalaxyl for 24 hours at room temperature. Metalaxyl(25% wettable powder), a fungicide, was used at the concentration of 200ppm as a promoting substance on the root-mat formation of the young rice seedling. Seeding rate of the young rice seedling was 220g per seed tray(30${\times}$60${\times}$depth 3cm). Metalaxyl seed treatment was highly effective in root initiation and elongation of the young rice seedling in terms of root activity, the number and length of root, and amino acid content of roots. The exogenous metalaxyl application would also increase the chlorophyll content and photosynthetic rate in the young rice seedling. Those factors resulted in vigorous root-mat formation of the young rice seedling. In particular, alanine is a lead compound of metalaxyl which biochemically plays an important role in energy intermediate of the rice plant. Alanine conjugation with a glucose (N-${\beta}$-glucoside) is probably the mechanism in enhancement of initiation and elongation of rice roots of young rice seedling.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.544-549
• /
• 2014

In this study, the permeation efficiency (PE) of sea tangle (Laminaria japonica) extract (STE) into egg using the temperature change method (TCM) and pressure was investigated. STE was prepared in a volume of water equal to 10 times the weight of the sea tangle at $100^{\circ}C$ over a 3 hr period. The PE of iodine as a representative component of the STE as well as the total polyphenol content at ambient pressure were determined as follows: 1) after soaking in the STE at 30, 40, and $50^{\circ}C$ for 3 hr, and 2) after soaking in the STE at $4^{\circ}C$ immediately after soaking in distilled water at $50^{\circ}C$ for 1, 2, and 3 hr (TCM), respectively. The PE of iodine as well as the total polyphenol content improved as the temperature of the STE increased (P<0.05). The permeation of iodine was more rapid, and the total polyphenol content increased with the TCM (121 ${\mu}g/100$ mg and 1.74 mg/mL for 3 hr, respectively) compared to without the TCM (72 ${\mu}g/100$ mg and 1.48 mg/mL for 3 hr, respectively), and the highest PE was observed with the TCM after soaking at $50^{\circ}C$ for 3 hr. At a pressure of 5.0 MPa, the PE was more rapid with the TCM (139 ${\mu}g/100$ mg and 1.74 mg/mL for 90 min, respectively) than without the TCM (105 ${\mu}g/100$ mg and 1.56 mg/mL for 90 min, respectively). Consequentially, these results suggest that the preparation of seasonings and functional eggs using various components and bioactive substances is possible by the TCM.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.70-78
• /
• 2007

This study explored the efficient dyeing method of aged chestnut wood using the natural dyes extracted from Gardenia jasminoides for, grandiflora, Carthamus tinctorius L., Rhus javanica L., Lithospermum erythrorhizon S. et Z., Caesalpinia sappan L. and Castanea crenata S. et Z.. The color variation of the dyed chestnut woods was also quantitatively evaluated. The wood specimens revealed abundant colors through different dyeing conditions such as dyeing temperature, dye pH, soaking time, and brushing frequency. The chroma and stain concentration of colored woods were calculated with $L^*$, $a^*$ and $b^*$ in order to make color tone measurement. Brushing treatment for colored wood was confirmed as a more economical dyeing method than soaking treatment requiring more time when natural dyeing was done. Furthermore, the desirable tone and shade of color was easily obtained by repetitive brushing treatment using low color tone. During natural dyeing, good color expression was made with high temperature and acidic condition of a dyeing liquor.

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.19-28
• /
• 1987

These experiments were conducted to recognize the germination change in relation to storage period, using 25 kinds of field-collected weed seeds stored under the dry and low temperature ($4{\pm}1^{\circ}C$), and to establish a simple germination induction methods in some kinds of them. No or weak dormancy was observed in Lepidium virginicum, Rumex japonicus, Cirsium japonicum var. ussuriense, Aeschnomene indica and Ludwigia prostrate. The germination of Digltaria sanguinalis, Portulaca oleracea, Amaranthus spp., Echinochloa crux-galli, Polygonum persicaria, Cyperus iria, and Aeschynnmene indica was enhanced by $H_2SO_4$ treatment for 20, 2, 2, 50, 40, 3 or 5 minutes, respectively. Favorable germination in Polygonum persicaria and Echinochloa crus-galli was obtained by soaking in water for 25 days and 50 days, respectively. Moisture treatment for 21 days and 14 days caused the enhancement of germination in Cyperus difformis and Aneilema keisak, respectively. Combination of various treatments in Cyperus iria was most effective when the seeds treated with $H_2SO_4$ for 3 minutes incubated in alternating temp. after soaking in 0.2% $KNO_3$, but their effect on Digitaria sanguinnlis was little.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.817-826
• /
• 2022

This study was conducted to determinean optimal soaking solution for inhibiting the texture softening of shrimp Litopenaeus vannamei pressured at high temperature (S-P/HT) in a retort, and also to optimize concentrations of 0.5% calcium chloride (CC) and 5.0% potato starch (PS) for preparation of a mixed solution (MS) and soaking time (ST) in the MS. On the basis of the results of expressible drip (4.6%), water holding capacity (95.1%), hardness (18.4 N/cm²) and sensory texture (7.2 score), the MS was found to be the optimal soaking solution for inhibition of texture softening under S-P/HT conditions, The concentrations of CC (X₁, %), PS (X₂, %), and ST (X₃, min) were selected as independent variables, and hardness (Y₁), springiness (Y₂) and sensory texture (Y₃) were selected as dependent variables. The optimal conditions of X₁, X₂, and X₃ were 0.51%, 6.34%, and 364 min, respectively. Under the optimal conditions, the experimental values of Y₁, Y₂ and Y₃ were 18.3±0.8 N/cm², 4.4±0.3 mm and 7.7±0.2, respectively, which did not diffr significantly from the predicted values (P>0.05). In conclusion, the optimized models of X₁, X₂, and X₃ for the preparation of S-P/HT using CC-PS were suitably fitted.

• Journal of Technologic Dentistry
• /
• v.8 no.1
• /
• pp.51-55
• /
• 1986

The castability of base metal alloys for dental casting in influenced by burn-out temperature and recent percentage. Burn-out temperatures for casting are set at 200$^{\circ}F$ interval from 1000$^{\circ}F$ to 1800$^{\circ}F$. According to recast metal percent in new cast alloy metal alloys are tested. The results are as followings: 1. In the new alloy(100%), the castability is the most. 2. The burn-out temperature in 1600$\sim$1800$^{\circ}F$, castability of 100% new alloy was more four times than of 50% new alloy plus 50% recast alloy. The using of 50% new alloy and 50% recast alloy, therefore, was unlike in castability. 3. The burn-out temperature in 1600$^{\circ}F$, castability of 100% new alloy was more than four times in soaking 20 minutes, but there was no any difference at 18700$^{\circ}F$. 4. It is investigated that the optimal burn-out temperature is 1600$^{\circ}F$ for the C & B alloy.