• Journal of the Korean Society of Food Culture
• /
• v.24 no.3
• /
• pp.295-307
• /
• 2009

The principal objective of this study was to develop and standardize a preparation method for low-sodium tomato jangachi (traditional Korean pickle) via short-term fermentation with immature green cherry tomatoes. In order to determine the preferred concentrations of soy sauce and soaking temperatures of immature cherry tomato pickles in different stages of storage, we conducted an analysis of physico-chemical characteristics and microbiological properties, and also performed a preference test on samples of immature green cherry tomato pickles. Immature cherry tomatoes were prepared in three different soy sauce concentrations --20, 40, and 60%-- and three different soaking temperatures --60, 80, and 100$^{\circ}C$-- and then stored for 28 days at 5$^{\circ}C$. As a result, the pH increased significantly with increases in the amount of soy in the dipping solution (p<0.05). The saltiness was maintained at levels of approximately $0.17{\sim}0.28%$ (20% group), $0.32{\sim}0.67%$% (40%group), $0.48{\sim}1.00%$ (60% group) during storage periods. These results show that the saltiness of immature cherry tomato pickles was substantially lower than that of commercial pickles. The contents of reducing sugar and lightness decreased significantly with increasing concentrations of soy dipping solution. The redness and yellowness values of the tomatoes decreased significantly with increasing concentrations of soy sauce. Additionally, the lower the concentration of soy sauce used, the more rapidly the hardness of the immature cherry tomato pickles was reduced at 100$^{\circ}C$. PME activity moved within a narrow range, and then stabilized during the storage period. With regard to the results of the consumer preference test, 20%-100$^{\circ}C$ was the most preferred condition overall, 40%-80$^{\circ}C$ was the condition in which the texture was most preferred, and 40%-80$^{\circ}C$ was the condition that yielded the highest color scores.

• Journal of the Korean Ceramic Society
• /
• v.13 no.3
• /
• pp.21-27
• /
• 1976

Foam formation of Slag-Quartz-$\textrm{Na}_2\textrm{CO}_3$ system was investigated. The foaming agent used was sulphide and sulphate compounds which are present in the slag. The microstructures and x-ray analysis of foam slag, the effect of composition and particle size of slag on the formation temperature, and foam size and distribution of slag foam were studied. The Increment of $\textrm{Na}_2\textrm{O}$ in the slag batch composition decrease the initial foam formation temperature and enhance the foam growth. The formation of temperature and soaking time had pronounced effect on the foam growth and increasing the glass phase in the slag foam.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1350-1357
• /
• 2003

This research was aimed to establish the standard extraction and analytical procedures for examining the chromophoric substance in madder root with the ultimate goal of identifying the dyes in badly faded textiles of archaeological origin. The separation temperature of gas chromatography, pH and other extraction conditions were tested. The results were as follows: The suitable separation temperature for the GC cappillary column was 50∼305$^{\circ}C$, and methanol was a good GC solvent for both standard alizarin and madder extraction. The best extraction of madder was achieved by 90 min soaking in room temperature followed by filtration and the actual heat extraction procedure. The best pH for extracting alizarin was pH 3 and above pH 5 alizarin was not detectible. Only alizarin and no purpurin was found in the extraction of the currently used madder plant.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.65-66
• /
• 2023

This study is aimed to understand the effect of pyrolysis temperature on the biochar synthesis for shape stabilizing the Lauric acid (LA). Three different temperatures (350, 500, and 650 ℃) have been chosen with a soaking time of 1h for synthesizing biochars form sesame plants (SP). The structural characterizations indicate the formation of amorphous biochar at 350 ℃ whereas, a stain of graphene formation has been observed for the biochar synthesized at 500 ℃. Formation of a substantial amount of graphene has been found for the sample, synthesized at 650 ℃. Energy storage performances of the PCMs which are shape stabilized by these three biochars have been discussed in this paper.

• Journal of Forest and Environmental Science
• /
• v.35 no.4
• /
• pp.223-231
• /
• 2019

Castanopsis indica (Sil Batna) is an ecologically valuable multipurpose indigenous tree species of Bangladesh. Considering its high value but poor natural regeneration due to seed dormancy, the authors conducted an experiment at the Institute of Forestry and Environmental Sciences Chittagong University (IFESCU) during 2012-2013 to find out effective pre-sowing treatments. Ten pre-sowing seed treatments were applied on mature, even-sized seeds namely-control; sandpaper rubbing; nail clipping; immersion in normal water (at room temperature: 24℃) for 24 hrs., 48 hrs. and 72 hrs.; immersion in hot water (80℃) for 1 minute; soaking in 10% dilute H₂SO₄; soaking in 10% HCl for 5 minutes; and sowing in propagator house. Seeds sown after sandpaper rubbing at the distal end revealed best performances by providing highest germination percent (66.7%), germination energy (30%), germination index (0.17), germination rate (0.0145), germination value (30%) and plant percent (66.7%) within shortest period (38 days). The treatment also produced most vigor seedlings with 20.9 cm shoot height, 15 node number, and largest leaves (11.1 cm×2.9 cm). Hence, it is recommended to adopt sandpaper rubbing method for maximum germination and quality seedlings.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.707-713
• /
• 1996

Changes of sodium chloride content in Chinese cabbage were investigated at different conditions. The diffusion rate of sodium chloride into the cabbage increased with increasing the temperature of brine solution. Sodium chloride content of Chinese cabbage at the lower portion of tank was higher than that at the upper position. The more washing and dewatering, the lower sodium chloride content of the cabbage was found. Microstructure pattern of salted cabbage tissue depended upon height of tank. The changed epidermis cell was recovered after several times of washing.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.107-112
• /
• 2017

Purpose: Both silica gel and activated carbon black particles were adopted for use as PCM absorbed porous media applicable as construction materials. To investigate usable methods for absorbing PCM into the media, they were soaked into PCM and also tested for enhancement of PCM absorption into them. Method: To test PCM absorption into some porous media such as both ${\varphi}1{\sim}2mm$ and $10{\mu}m$ silica gels, and $50{\mu}m$ activated carbon black, $43^{\circ}C$ PCM was used as a laten heat material. The method, soaking into PCM was applied to this study, and the media were moderately rotated by centrifuge to have the extra PCM flow out. DSC analysis was conducted to investigate the melting and solidifying of the PCM absorbed into the porous media. Result: It was found that PCM was absorbed into the porous media by over 85 wt% of all particles. In addition, it was noted that the ultrasonic vibrator was accelerating the PCM absorption into the particles to three times higher speed than simple soaking. Centrifuge was adopted to remove extra PCM sticking on the particle surfaces and extra PCM was moderately removed from the surfaces of the particles. DSC analysis indicated that the latent heat of the absorbed PCM particles was 160 J/g, and the melting temperature was approximately $40^{\circ}C{\sim}50^{\circ}C$.

• The Plant Pathology Journal
• /
• v.18 no.4
• /
• pp.199-203
• /
• 2002

Soft rot occurred severely in onion bulbs stored under low temperature ($5^{\circ}C$) in storage houses at Changyoung, Kyungnam province, Korea in early 2000. Water-soaking and yellowish-brown lesions initially appeared on the outside scales of diseased onion bulbs, gradually progressing into the inside scales. Among the bacterial isolates obtained from the lesions, K-2 isolate was found to be responsible for the disease, which grew at a temperature range of from $0^{\circ}C$ to $36^{\circ}C$ with optimum temperature of $00^{\circ}$-$33^{\circ}C$. However, it showed strong pathogenicity to onion bulbs at $25^{\circ}C$ and $5^{\circ}C$ at 3 days and 2 months, respectively. The bacterium also caused soft rot on potato and showed hypersensitive reactions to tobacco and potato. The causal bacterium of onion soft rot was identified as Pseudomonas marginalis based on morphological, biochemical, and physiological characteristics including LOPAT, Soft rot in onion under low temperature storage caused by P. marginalis has not been previously reported.

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.95-99
• /
• 1988

The changes of texture, composition of cell wall polysaccharides, polygalacturonase (PG) activity and soaking effect during preserving of persimmon at various tempoeratures were estimated for the purpose of investigating the softening characteristics of persimmon fruit. The softening of persimmon was most promoted at $25^{\circ}C$, where in the higher temperature, at $45^{\circ}C$ it was inhibited. During softening adhesiveness increased, cohesiveness and gumminess decreased. This phenomenon was obvious at $25^{\circ}C$. By soaking in water at $50^{\circ}C,\;70^{\circ}C$ for 30 minutes PG activity and softening was inhibited. Ionically associated pectin (IAP) and covalently bounded pectin (CBP) fractionated from crude cell wall of fresh persimmon were respectively degraded about 60% by PG curde enzyme of softened persimmon. And the degraded ratio of polysaccharides composed of pentose and hexose was very similar to that of polyuronide.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.682-689
• /
• 2015

A two-step process was investigated for pretreatment and fractionation of rice straw. The two-step fractionation process involves first, soaking rice straw in aqueous ammonia (SAA) in a batch reactor to recover lignin-rich hydrolysate. This is followed by a second-step treatment in a fixed-bed flow-through column reactor to recover xylo-oligomer-rich hydrolysate. The remaining glucan-rich solid cake is then subjected to an enzymatic process. In the first variant, SAA treatment in the first step dissolves lignin at moderate temperature (60 and $80^{\circ}C$), while in the second step, hot-water treatment is used for xylan removal at higher temperatures ($150{\sim}210^{\circ}C$). Under optimal conditions ($190^{\circ}C$ reaction temperature, 30 min reaction time, 5.0 ml/min flow rate, and 2.3 MPa reaction pressure), the SAA-hot-water fractionation removed 79.2% of the lignin and 63.4% of the xylan. In the second variant, SAA was followed by treatment with dilute sulfuric acid. With this process, optimal treatment conditions for effective fractionation of xylo-oligomer were found to be $80^{\circ}C$, 12 h reaction time, solid-to-liquid ratio of 1:12 in the first step; and 5.0 ml $H_2SO_4/min$, $170^{\circ}C$, and 2.3 MPa in the second step. After this two-step fractionation process, 85.4% lignin removal and 78.9% xylan removal (26.8% xylan recovery) were achieved. Use of the optimized second variant of the two-step fractionation process (SAA and $H_2SO_4$) resulted in enhanced enzymatic digestibility of the treated solid (99% glucan digestibility) with 15 FPU (filter paper unit) of CTec2 (cellulase)/g-glucan of enzyme loading, which was higher than 92% in the two-step fractionation process (SAA and hot-water).