• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1011-1012
• /
• 2006

In this paper, implementation process of standard platform for T-DMB Receiver in low-cost and small-size are following: First, implement SoC for 32 bit RISC CPU and 16 bit DSP, Hardware H.264 CODEC, Post Processor or Video Display, Audio Processor, I/O Device. Second, implement Real Time OS for flexible application. Third, propose simple architecture for interface with peripheral devices using one-chip processor.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.27-36
• /
• 2002

VoiceXML is a standard dialog mark-up language for the neat generation voice applications. The current VoiceXML 1.0 specification is silent on who place outbound calls for push-based voice applications. The push-barred voice applications become very important in modern information systems such as CRM. In this paper, we design and implement an extended VoiceXML platform that supports both inbound and outbound voice information services. We also extend the VoiceXML DTD so as to be able to inbound/outbound fax based on Call Control Requirements of W3C.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.1-14
• /
• 2003

E-commerce requires many different types of communications and an unprecedented amount of data changes hands. The many different Platforms and systems interacting require a platform neutral standard for data exchange. One of the technologies that can fill this niche is XML, the extensible markup language established as a standard by the W3C. By being standardized and platform neutral, XML to be factor in e-commerce application and using many systems In this paper, we designed XML document that is used in transaction between corporations, and implement the B2B integration system based on XML database system. Also we use XSLT that make efficient transformation XML documents for exchanging heterogeneous XML data between corporations. So, he or she can more easily and efficiently exchange XML documents between corporations using this system.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.13-20
• /
• 2006

A platform diving with categorizing 624C motion was video taped and 3D kinematic variables were analyzed. This motion is consist of 3 parts from the headstand position to the act of turning after take-off. The results indicated that it took a very short time from the moment of take-off to the act of 1/2 turning because the turning motion has already started from preparing motion even before the fingertips have parted from the ground. Also, there was barely any jumping height due to the use of upper limbs segment and there was little difference in the moving distance compared to the standing events judging from horizontal movement of 1.1m. The horizontal velocity of the center of human body was increased before take-off while the vertical velocity was decreased right after take-off and the velocity of lower limbs segment was faster than the upper limbs segment showing contrary results to the standing events. In the aspects of angular velocity, the upper limbs segment starts the turning motion when take-off by rapidly extending its angular velocity while lower limbs segment make large angular velocity even before take-off.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.208-210
• /
• 2019

Creating a virtual reality ecosystem is more important than anything else for virtual reality, which has recently been drawing attention as a sector of the fourth industrial revolution. Virtual reality ecosystem consists of content (C), device (D), platform (P), and network (N). While content is key among these, virtual reality depends on input and output devices, so device utilization is very important. Recently, hands-on devices are being developed for realistic experiences. This study presents examples of contents development using VirZOOM, an experienced device, to reduce immersion and motion sickness of VR contents. We look forward to further promoting the development of virtual reality content in the future through this study.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.129-136
• /
• 2002

JNI is a linkage method to other languages such as C/C++ which enables the Java to do the platform-dependent specific tasks and also, it can be used to reuse the existing libraries and programs. However, the complex and difficult steps are required to use JNI and it is Inconvenient to manipulate Java source and C/C++ source separately. We design and implement the JPP (Java Preprocessor) that enables the Java source and C/C++ source to handle in a same source file and reduces the required steps so as to use JNI easily.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1707-1712
• /
• 2013

In this paper, we implement a hardware for motor control based on FPGA + embedded processor using Zynq EPP which is All Programmable SoC in order to improve a structural problem of motion control based on such as DSP, MCU and FPGA previously. The implemented motor controller that is fused controller with advantage of FPGA and embedded processor. The signal processing part of high velocity motor control is performed by motor controller based on FPGA. A motion profile and kinematic calculation that are required algorithm process such as operation of a complicate decimal point has processed in an embedded processor based on dual core. As a result of a hardware implementation, it has an advantage that has can be realized an effect of distribution process in one chip. It has also an advantage that is able to organize as a multi-axis motor controller through adding the IP core of motor control implemented on FPGA.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.30-35
• /
• 2001

To get higher efficiency of gas turbine, The designer should have more higher turbine inlet temperature (TIT). Today, modem gas turbine having sophisticated cooling scheme has TIT above $1,700^{\circ}C$. In the korea, many gas turbine having TIT above $1,300^{\circ}C$ was imported and being operated, but the gas with high TIT above $1,300^{\circ}C$ in the turbine will give damage to liner of combustor, and blade of turbine and etc. So frequently maintenance for parts enduring high temperature was performed. In this study, the heat transfer analysis of cooling air in the internal cooling channel (network analysis) and temperature analysis of the blade (Finite Element Analysis) in the first stage rotor was conducted for development of the optimal cooling passage design procedure. The results of network analysis and FEM analysis of blade show that the high temperature spot are occured at the leading edge, trailing edge near tip, and platform. so to get more reliable performance of gas turbine, the more efficient cooling method should be applied at the leading edge and tip section. and the thermal barrier coating on the blade surface has important role in cooling blade.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.473-480
• /
• 2018

In 2012, a new energy capturing method called TENG was suggested for energy harvesting applications. The TENG which captures electric energy in forms of friction or vibration has been researched as a new energy harvesting generation device. However, TENG works on rather high voltage and yields relatively low current, and this requires additional energy conversion and saving methods with either in semiconductive elements or circuitry for its application. Irregular generation from vibration sources rattle under 5Hz especially requires empirical studies. In this article, we suggest a electricity generation platform with energy storage methods. The platform is mounted on large sized animals, and the generation is actively monitored and controlled via Bluetooth-Low Energy to verify the platform.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.67-73
• /
• 2018

There are many types of power facilities such as transformers, switches, and energy storage devices in the micro grid environment. However, with the development of IoT technology, opportunities to acquire sensor information such as temperature, pressure, and humidity are provided. In the existing micro grid environment, the communication protocols such as MMS transport protocol in IEC 61850 standard is applied in accordance with the integrated operation between the power facilities and the platform. Therefore, to accommodate IoT data, a gateway technology that can link IoT data to a data collection device (FEP) based on IEC 61850 is required. In this paper, we propose IEC 61850 based IoT gateway platform prototype for microgrid operating system linkage. The gateway platform consists of an IoT protocol interface module (MQTT, CoAP, AMQP) and database, IEC 61850 server. For databases, We used open source based NoSQL databases, Hbase and MongoDB, to store JSON data. We verified the interoperability between the IoT protocol and the IEC 61850 protocol using Sisco's MMS EASY Lite.