• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.814-817
• /
• 2003

As additive Pt of a little to $SnO_2$ that gas sensing property is superior oxide-semiconductor material to fabricate gas sensor that operation is possible at room temperature and fabricated ceramic gas sensing devices. And, the change amount and sintering temperature of addition material investigated gas sensitivity by change of operation temperature, humidity relativity, Long-term stability and hysteresis. And achieved SEM and XRD analysis for characteristics searching examination of devices.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.1
• /
• pp.51-53
• /
• 2008

A new nano-particle deposition system (NPDS) was developed for a ceramic and metal coating process. Nano- and micro-sized powders were sprayed through a supersonic nozzle at room temperature and low vacuum conditions to create ceramic and metal thin films on metal and polymer substrates without thermal damage. Ceramic titanium dioxide ($TiO_2$) powder was deposited on polyethylene terephthalate substrates and metal tin (Sn) powder was deposited on SUS substrates. Deposition images were obtained and the resulting chemical composition was measured using X-ray photoelectron spectroscopy. The test results demonstrated that the new NPDS provides a noble coating method for ceramic and metal materials.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.925-928
• /
• 1999

A multi-channel gas leakage monitoring system was designed and fabricated by using CPLD(complex Programmable Logic .Device) for monitoring and controlling the leakage of natural gas from supplying-pipes under the ground. Fabricated SnO$_2$thick film gas sensor elements were attached on safeguard steel plate of natural gas supplying pipes, and the local monitoring system in this study received the signal from the gas sensors. The monitoring system was implemented by using CPLD chip to reduce the development time and implement simple one chip system. The time division multi-channel system received the input signal from individual gas sensor at one of divided times by multiplexor and signal processed sequentially. The system reduced the size of peripheral circuit resulted in implementation of creditable simple system.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.117-118
• /
• 2008

The main objectives of this study are develop an Electro-Chemical process for dyeing wastewater treatment. In this work, We are investigated to optimization of electro-chemical process condition such as pH, additives(NaCl), reaction time, current density. As a result, About 89% of color(influent 452.5 ptco. unit) was removed by Electro-Chemical process using type C $SnO_2$ electrode. This results are promising potential for dyeing wastewater treatment.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.191-193
• /
• 2005

This study has investigated the effects of the etching method of a Ti substrate for a metal oxide electrode on the electrochemical characteristics of the electrode. The HCl etching develops a fine and homogeneous roughness on the Ti substrate. Fabrication and material properties of the catalytic oxide electrode, which is known to be so effective to destruct refractory organics in aqueous waste, were studied. A method to enhance the fabrication reproducibility of the oxide electrode was tested for Ru, Zr, Sn oxide on the Ti substrate using SEM, XRD, Cyclic voltammetry.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.239-240
• /
• 2014

$In_2O_3$에 Sn이 도핑된 Indium Tin Oxdie (ITO)는 높은 전기전도성 및 광투과율을 가지므로 터치센서, 태양전지, 스마트 윈도우, 플렉시블 디스플레이등의 수많은 광전자 소자에 필수적이다. 특히 스마트산업이 발전함에 따라 Touch Screen Panel (TSP) 에 적용되는 터치용 고품질 초박막 ITO의 수요가 증가하고 있다. 그러나 초박막 ITO 필름은 얇은 두께로 인해 낮은 결정성을 가지기 때문에 높은 전기전도성을 확보하기 힘들다. 따라서 본 연구에서는 결정성을 향상시키기 위하여 초기 박막 성장 메커니즘에 영향을 주는 인자를 제어하는데 목표를 두었으며 이러한 박막 초기의 성장에 영향을 미치는 인자들 중 자장강도를 변화시킴으로써 플라즈마 임피던스를 조절하였다. 그 결과 전기적 특성 및 광학적 특성은 자장강도에 매우 의존함을 확인할 수 있었다.

• Korean Journal of Materials Research
• /
• v.7 no.7
• /
• pp.564-570
• /
• 1997

용융산화에 의한 AI$_{2}$O$_{3}$복합재료의 형성에 미치는 합금원소의 영향을 연구하였다. AI-Mg-3Si 합금이 가장 우수한 산화거동을 보였다. 우수한 3원계로 선정된 AI-1Mg-3Si합금에 제 4원소 Sn, Cu, Ni, Zn을 양을 달리하여 각각 첨가하여 산화거동을 살펴보았다. 1273K, 1373K, 1473K, 에서 20시간 각각 산화실험을 한 결과, 1473K에서는 모든 합금계가 우수했으나 1373K, 1273K에서는 산화가 거의 일어나지 않았다.

• Journal of the Korean Home Economics Association
• /
• v.40 no.12
• /
• pp.109-118
• /
• 2002

The Purpose of this study was to investigate dyeing properties and color fastness of Ainus firma sieb. et Zucc. Fruit, according to dyeing temperature, dyeing time, dyeing concentrations and various mordants. The results were as follows ; 1. The dyeabilities of the natural colorants extracted from Alnus firma fruit were investigated under various dyeing temperature, dyeing time and dyeing concentration. As a result, the optimum dyeing temperature, time and concentration of silk fabric with Alnus firma fruit were $60^{\circ}C$, 60min and 100％(o.w.f.) respectively. 2. Alnus firma fruit extract dyed reddish purple (RP hue) on the Fe-mordanted silk fabric. In the case of other mordants, silk fabrics dyed yellow (Y hue). 3. Generally, the light color fastness was relatively fair in the silk fabric dyed with the Alnus firma fruit and Fe mordant. The washing color fastness of color change of silk dyeings mordanted with Al, Sn showed 4 grade. However, the dry cleaning color fastness of the silk fabric was fastness was excellent. The rubbing color fastness showed 4 grade at the most of mordants except Cu.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.383-384
• /
• 2008

$SnO_2$ oxides are considerable interest for the development of transparent electrode, thin film resistor and gas sensors. Electrospinning is a class of nanofiber forming processes by which electrostatic forces are employed to control the production of nanofibers. In this study, antimony doped tin oxide thin films were prepared by electrospinning process. Effects of ATO doping concentration and applied voltage on electrical and light transmission properties were investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.510-514
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn 10wt%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature 15$0^{\circ}C$ and 8% $O_2$. Partial pressure showed about 3.6 Ω/$\square$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.