• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1156-1166
• /
• 2004

Antimony profiles by MeV implantation are measured by secondary ion mass spectrometry (SIMS) and spreading resistance (SR). The moments of SIMS and simulated profiles are calculated and compared for the exact range in MeV energy. SRIM, DUPEX, ICECREM, and TSUPREM4 simulation programs are used for the calculation of range 1D, 2D. SRIM is a Monte Carlo simulation program and different inter-atomic potentials can be used for the calculation of nuclear stopping power cross-section (Sn) and range moments. Nevertheless, the range parameters were not influenced from nuclear stopping power in MeV. Through the modification of electronic stopping power cross-section (Se), the results of simulation are remarkably improved and matched very well with SIMS data. The values of electronic stopping power are optimized for Sb high energy implantation. For the electrical activation, Sb implanted samples are annealed under $N_2$ and $O_2$ ambient. Finally, Oxidation retard diffusion(ORD) effect of Sb implanted sample are demonstrated by SR measurements and ICECREM simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.105-109
• /
• 1992

ITO film, 1500${\AA}$ of thickness, onto glass and p-InP wafer was prepared by e-beam evaporator. The bet ITO film had the resistivity 5.3${\times}$10$\^$-3/ $\Omega$-cm, the concentration 6.5${\times}$10$\^$20/cm$\^$-3/, the transmittance above 80%, and the optical energy gap about 3.5eV. The higher pressure of injected oxygen, the less reverse bias saturation current and the more open circuit voltage. Under the optimum evaporation conditions, the efficiency was 7.19% and the series resistance, and the shunt resistance were respectively 8.5%, 3${\alpha}$, and 26K$\Omega$. The interdependence between activation energy and pre-exponential factor was found. We found he surface of the p-InP became n-type and consquently supposed that the buried homojunction formation, that is, n+-ITO/n-InP/p-InP was caused by Sn diffusion or loss of phosphorus in the interface layer.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.2
• /
• pp.125-130
• /
• 2004

Paclitaxel is an effective antineoplastic drug for various cancers especially ovarian and breast cancer. This study is to find the optimum condition for the preparation of nanoemulsions and to improve the stability and loading amount of paclitaxel in nanoemulsions. Nanoemulsions were prepared by modified spontaneous emulsification solvent diffusion method. It was composed of phosphatidylcholine:cholesterol:1,2-Distearoyl-sn-Glycero-3-Phosphoethanolamine-N-[Metoxy (Polyethylene glycol)-2000]:paclitaxel at a weight ratio of 5:3:1:1 and the Tween 80 as a surfactant. The particle size and the shape of nanoemulsions were measured by particle analyzer and SEM, respectively. The loading amount of paclitaxel in nanoemulsion was measured by UV-visible spectroscopy at 227 nm. The particle sizes were $80{\sim}120\;nm$ and the loading efficiency of paclitaxel was $8{\sim}39%$. The optimum conditions for the preparation of nanoemulsions were 8% w/w phospholipid, 16% w/v Tween 80 and 2% w/w paclitaxel, respectively.

• Journal of Surface Science and Engineering
• /
• v.45 no.3
• /
• pp.117-122
• /
• 2012

ZTO/GZO double layered films were prepared on unheated non-alkali glass substrates. ZTO films were deposited by RF/DC hybrid magnetron co-sputtering using ZnO (RF) target and $SnO_2$ (DC) targets, and then GZO films were deposited by DC magnetron sputtering using an GZO ($Ga_2O_3$:5.57 wt%) target. These films were post-annealed at temperature of 200, $300^{\circ}C$ in air and vacuum ambient for 30 min. In the case of post-annealing in air, ZTO/GZO double layer showed relatively low resistivity change, compared to GZO single layer. Furthermore, ZTO/GZO double layer revealed low WVTR, compared to GZO single layer. Therefore, it can be confirmed that ZTO film doing a role with barrier for water or oxygen diffusion.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.9-15
• /
• 2018

This paper shows the principles and characteristics of the transient liquid phase (TLP) bonding technology for power modules packaging. The power module is semiconductor parts that change and manage power entering electronic devices, and demand is increasing due to the advent of the fourth industrial revolution. Higher operation temperatures and increasing current density are important for the performance of power modules. Conventional power modules using Si chip have reached the limit of theoretical performance development. In addition, their efficiency is reduced at high temperature because of the low properties of Si. Therefore, Si is changed to silicon carbide (SiC) and gallium nitride (GaN). Various methods of bonding have been studied, like Ag sintering and Sn-Au solder, to keep up with the development of chips, one of which is TLP bonding. TLP bonding has the advantages in price and junction temperature over other technologies. In this paper, TLP bonding using various materials and methods is introduced. In addition, new TLP technologies that are combined with other technologies such as metal powder mixing and ultrasonic technology are also reviewed.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2013

In this paper, the Constitutional Court's ruling through the SNS was virtually guaranteed the freedom of election campaign through, though, still a large portion of campaign restrictions on public election law provisions exist to this forward in the election is likely to cause a lot of legal problems. In this paper, the Constitutional Court's ruling through the SNS was virtually guaranteed the freedom of election campaign through, though, still a large portion of campaign restrictions on public election law provisions exist to this forward in the election is likely to cause a lot of legal problems. Moreover, in the mean time the campaign and which in the course of the election campaign through the SNS, the infinite potential of the growing point than any point spread from the SNS and freedom of election campaign through public election law with regard to the limitation of the diffusion of false facts, awards, a number of problems are likely to occur. You've been in this business and disseminate false guilt disparage precandidacy for true-false, as well. He should be able to reach a specific goal you want to defeat through the dissemination of information which is specified as a crime for this strictly for the fact that disseminate false, rather than to interpret it is the judgment of the Court in that judgment against have been made. Therefore, this strict interpretation of the law and the need to revise or delete before I would like to discuss about. The legislation would repeal the cull of Ron sang first of all point out the issue through analytics. First, the purpose of the data protection Act provides limited interpretation to fit in this world of sin. Secondly, this sin is committed for the purpose of prevention, since the purpose of the objective in this case of sin and the need to interpret strictly. Why I am the Internet space in the case of so-called tweets from followers, this means in some cases done without a lot of the stars because of this, there will be a limit to the punishment of sin, this is obvious. And, in the long-awaited Constitutional Court ensures the freedom of election campaign through SNS and free election in the country, even in the limited sense interpretation opens the chapter of communication is needed. This ensured the freedom of expression will be highly this is a mature civil society that will be imperative.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.221-225
• /
• 2006

Cucumber mosaic virus(CMV) and Broad bean wilt virus 2(BBWV2) were isolated from Gentiana scabra plants showing typical mosaic and yellowing symptoms. When the inoculum of mosaic symptom propagated in Nicotiana benthamiana was inoculated to primary leaves of Vigna sinensis, the local lesions of different types was developed. Type one produced a small necrotic spot(SNS) of pinpoint type, while the other one showed a large necrotic spot(LNS) of halo type. LNS on primary leaves of V. sinensis was also induced by inoculum from yellowing symptom on G scabra. Single lesion from SNS induced a typical mosaic symptom on N. Benthamiana. On the other hand, LNS produced a chlorotic ring symptom on inoculated leaves and mosaic plus necrotic ringspot on upper leaves of N. benthamiana. An isolate of CMV from SNS and BBWV2 from LNS were detected by using dsRNA analysis, RT-PCR and agar gel double-diffusion test. Thus, our results should provide a tool of a simple method for discrimination from mixed infected plants by CMV and BBWV2.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.269-287
• /
• 2016

This study explores of press report on the death of Beongen Yoo based on network analysis and how issue diffuses via Internet and SNS in mainstream news and conservative channels of comprehensive programming. Issue salience, word's visibility and word's connectivity are the main keyword and analysis criteria of this study. Conservative channel of comprehensive programming focused on the surrounding information rather than core information compared to Mainstream media, Conservative channels of comprehensive media was interested in Yu, Beongeon, an article left, brand, rumor of a body and Mainstream media focused on the results of DNA test. Mainstream media covers this case as the discovery of the Yu, Beongeon body, Mainstream media reported as 'the discovery of the body frame, conservative channels of comprehensive programming reports as blame of investigation at the first stage. The former focuses on the cause of death and the latter focuses on the raising of strong doubts frame at the second stage. In case of the third stage the latter covered on the emphasis of the surrounding information. They frames the issue differently based on network analysis. The view point of conservative channel of comprehensive programming is diffused via SNS. This study highlights the role of journalist of mainstream media in the process of agenda-setting

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.305-311
• /
• 2001

$PbO-B_2O_3-SiO_2-Al_2O_3$, system was investigated for optical, thermal and electrical properties of transparent dielectric. We also studied the reaction between transparent dielectric and transparent electrode(Indium Tin Oxide, ITO) during firing. For the evaluation of properties, dielectrics were prepared under the conditions fired at 520~58$0^{\circ}C$ with 12$\mu\textrm{m}$ thickness. In the reaction between dielectrics and electrode(ITO), In ions diffused into dielectric layer, while Sn ion diffusion was not observed. The coefficient of thermal expansion, the dielectric constant, the glass transition temperature and the transmittance of the dielectric were greatly dependent on PbO content. The increase of the coefficient of thermal expansion and the dielectric constant were monitored by increasing PbO, while the glass transition temperature and the transmittance were decreased. With the increased $Al_2O_3/B_2O_3$ ratio, the coefficient of thermal expansion and the transmittance were decreased, while the dielectric constant was increased. The glass transition temperature did not change significantly.