• 방송공학회논문지
• /
• 제20권6호
• /
• pp.880-887
• /
• 2015

본 논문은 EBME(Extended Bilateral Motion Estimation) 알고리듬에서 동일한 움직임 벡터들의 방향과 크기를 고려한 알고리듬을 제안하였다. EBME는 BME(Bilateral Motion Estimation)보다 높은 연산량을 요구하기 때문에 프레임 내의 x, y방향 각각의 평균 움직임 벡터크기를 이용하여 동적프레임과 정적프레임을 판단하고, EBME 수행여부를 판단하여 연산량을 줄인다. 또한 동일한 움직임 벡터들의 방향과 크기를 비교하여 MVS(Motion Vector Smoothing)단계 수행여부를 판단함으로써 연산량을 줄인다. 제안하는 알고리듬을 적용한 실험 결과 기존의 EBME 알고리듬에 비해 수행시간은 단축되고 PSNR(Peak Signal to Noise Ratio)은 향상 되었다.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.1-7
• /
• 2005

본 연구에서는 삼각격자 균질화를 위하여, 확장된 위상학적 개선과정과 국소 최적화 기반 평활화를 결합한 국소 개선기법을 제안하였다. 먼저 격자의 연결 구조를 확장된 위상학적 개선과정을 적용하여 최적의 연결구조로 개선한다. 다음으로 격자의 질을 나타내는 비틀림척도를 최대화하기 위해 국소 최적화 기반 평활화를 수행한다. 이 국소 개선기법을 이용하여, 두 가지 격자 예제에 대하여 삼각격자 균질화를 수행하였다. 이 예들을 통하여, 본 연구에서 제안한 국소 개선알고리듬이 삼각격자의 질을 크게 향상시켜주는 경제적이며 효과적인 방법임을 보여준다. 또한, 이 기법은 적응격자 세분화의 격자 재생성과정에도 용이하게 적용될 수 있다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.55-57
• /
• 2015

The tracking system plays a key role in accurate estimation and prediction of maneuvering vessel's position and velocity in a bid to enhance safety by taking avoiding action against collision. Therefore, in order to achieve this, many ocean- going vessels are equipped with radar and the ARPA system. However, the accuracy of prediction highly depends on the choice of the gain parameters, ${\alpha}$, ${\beta}$ and ${\gamma}$ employed in the tracking filter. P revious research of this paper was based on theoretically developing an algorithm for a tracking module. This research paper is hence a continuation by the authors to determine the optimal values of the gain parameters used in the tracking module. A tracking algorithm is developed using the ${\alpha}-{\beta}-{\gamma}$ filter to carry out prediction and smoothing of the positions and velocities. Numerical simulations are then performed to evaluate the optimal values of the smoothing parameters that will improve the performance of the tracking module and reduce measurement noise. The twice distance root mean square (2drms) is then calculated to determine error variation.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.691-702
• /
• 2013

본 연구에서는 요일별 교통량 변동 패턴 기반 평활화법을 활용하여 정량적 이상치 판정 알고리즘을 개발하였다. 또한 개발된 알고리즘을 활용하여 2010년 일반국도 상시조사 지점 중 14개 지점의 교통량 자료에 대한 이상치 필터링을 수행하여 알고리즘의 적합성 여부를 평가하였다. 그 결과 정상일 필터링율은 98.2%, 이상일 중 오필터링율은 8.0%로 평가되었다. 따라서 본 연구에서 개발된 알고리즘은 수집된 교통량 자료의 1차적인 이상치 필터링에 충분히 적용 가능할 것이다.

• 한국통신학회논문지
• /
• 제23권8호
• /
• pp.2042-2051
• /
• 1998

압축 저장된 비디오 스트림들은 사용된 압축 알고리즘의 구조와 화면의 복잡도 등에 따라 다양한 형태의 트래픽 발생 특성으로 인하여, 송신측과 수신측 사이의 자원할당을 어렵게 한다. 본 논문에서는 VoD서비스를 제공하기 위한 단일 서버와 복수개의 클라이언트들이 단일 미디어의 공동망에 연결된 환경에 효과적으로 적용될 수 있는 적응적 대역 평활화 기법을 제안한다. 이를위해 우선, 본 논문은 한 개의 비디오 스트립에 효과적인 대역 평활화 기법으로 기존에 제안된 MVBA알고리즘을 분석한다. 이를 바탕으로 복수개의 클라이언트들이 임의로 서버에게 압축 저장된 비디오 스트립을 요구할 때, 각 클라이언트의 연속적인 복호와 재생을 유지하면서 동시에 다중화된 전송률을 적응적으로 평활화하는 알고리즘올 제안한다. 모의 실험을 통하여 제안된 방식은 기존의 단일 비디오 스트립을 독립적으로 제어하는 기법에 비해, 전송률의 첨두치율, 표준편차, 전송율의 변화 횟수 등의 척도에서 뛰어난 성능 개선을 보인다.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.146-155
• /
• 2012

The filtered-x LMS(FX-LMS) algorithm has been applied to the active noise control(ANC) system in an acoustic duct. This algorithm is designed based on the FIR(finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm(FU-LMS) based on infinite impulse response(IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.33.2-33
• /
• 2002

1. Introduction 2. The Feature of GPS Data 3. The Correction by Dead Reckoning (DR) Method 4. The Modified Simple DR Algorithm 5. The Smoothing 6. The Modification of Dilution of Precision (DOP) 7. Conclusion

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.231-239
• /
• 2009

The filtered-x LMS (FX-LMS) algorithm has been applied to the active noise control (ANC) system in an acoustic duct. This algorithm is designed based on the FIR (finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filteredu LMS algorithm (FU-LMS) based on infinite impulse response (IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2593-2596
• /
• 2003

The deadbeat properties have been well known in designing digital control systems. But recently several researchers proposed a CDBC(Continuout-time DeadBeat Controller) in continuous time. They used delay or smoothing elements from the finite Laplace Transform. A delay element is made by the exponential terms. A smoothing element is used to smooth the digital control input. And eventually the process is argumentd with smoothing elements and then well-known digital deadbeat controller is designed Sometimes samplings are done in continuous time systems and some hold devices are used to relate to digital systems. So multirate sampling may enhance the efficiency of the CDBC. A DC servo motor is chosen for implementing CDBC algorithm. Especially Outputs according to the variable input and disturbance are simulated. by use of Matlab Simulink.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.403-406
• /
• 2005

The purpose of this paper is to propose ways to remove false color noise (FCN) generated during de-mosaicing on RGB Bayer pattern images. In case of images sensors adapting Bayer pattern color filters array (CFA), de-mosaicing is conducted to recover the RGB color data in single pixels. Here, FCN phenomena would occur where there is clearer silhouette or contrast of colors. The FCN phenomena found during de-mosaicking process appears locally in the edges inside the image and the proposed method of eliminating this is to convert RGB color space to YCbCr space to conduct smoothing process. Moreover, for edges where different colors come together, censoring based smoothing technique is proposed as a way to minimize color blurring effect.