• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.348-357
• /
• 1998

The flow characteristics inside U-bend tube of the laminated plate heat exchanger were numerically investigated. The behavior of fluid flow, and the variations of the faulty area and friction factor are examined according to the distance between the span and the wall and the diameter of the round attacked to the end of span. The results show that the diameter(d) of the round attached to the span is mainly associated with the smooth circulation of fluid flow rather than the size of faulty area and the friction factor. As the distance($\ell$) between the span and the wall decreases, the faulty area decreases, however the friction factor dramatically increases. It is also found that one can obtain a good result in the view of the flow characteristics and pressure drop at d=7.5mm and $\ell$=30.5mm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.362-366
• /
• 2001

Leiomyosarcoma(LMS) is a malignant tumor from smooth muscle origin that arises most commonly in the gastrointestinal tract and uterus, but rarely in the oral and maxillofacial area which lacks smooth muscles. 63 cases of oral LMS have been reported, especially LMS that occurred in the mandibular gingiva is only 2 cases. Major symptom of oral LMS is painful or painless swelling. Besides it, oral LMS has no specific characteristics. So it is difficult to diagnose the case as LMS of the oral cavity. Certain cases report that LMS of the oral cavity was misdiagnosed as periodontitis and the patients were treated with unnecessary procedures. Conventional treatment of LMS is the radical surgical excision. LMS that is infiltrative and very malignant has poor prognosis despite of well-circumscribed boundary. LMS of the oral cavity is often recurred, has high rate of distant metastasis and 5-year-survival rate is as low as 23%. This article reports LMS of the mandibular gingiva that treated with surgical intervention, had local recurrence and metastasis to the lymph node after 16-month's follow-up examination.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2008

In this paper, we present a novel method for creating a hand-painted painterly animation, starting from a video input. One of the most important aspects in painterly animation is to maintain the temporal coherence of brush strokes between frames, which plays a vital role to warrant a smooth transition between frames. Our unique utilization of motion areas enables users to produce a smooth movement of brush strokes. The motion areas are the parts where objects move between frames and they are categorized in two main types. A strong motion area is the part where the movement of real edges and hidden edges is determined by the motion vector between frames. The real edge is the outline of an object and the hidden edge is the boundary to represent the direction of a grain of intensity in the areas with gradations. A weak motion area is the remainder after subtracting the strong motion area from the entire motion area. Temporally coherent painterly animation is achieved by re-painting the brush strokes on the canvas using two motion areas, resulting in a natural and hand-painted appearance.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.733-743
• /
• 2017

This paper develops a coordinated control strategy of the doubly fed induction generator (DFIG) system based on repetitive control (RC) under generalized harmonic grid voltage conditions. The proposed RC strategy in the rotor side converter (RSC) is capable of ensuring smooth DFIG electromagnetic torque that will enable the possible safe functioning of the mechanical components, such as gear box and bearing. Moreover, the proposed RC strategy in the grid side converter (GSC) aims to achieve sinusoidal overall currents of the DFIG system injected into the network to guarantee satisfactory power quality. The dc-link voltage fluctuation under the proposed control target is theoretically analyzed. Influence of limited converter capacity on the controllable area has also been studied. A laboratory test platform has been constructed, and the experimental results validate the availability of the proposed RC strategy for the DFIG system under generalized harmonic grid voltage conditions.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.83-94
• /
• 1999

The ultrastructure of small arterioles and capillaries in the lumbrical muscles of rat digits were studied by electron microscopy and following results were obtained. 1. The diameter of small arterioles of rat digits were $12\sim20{\mu}m$, and it was relatively smaller than human $(30\sim35{\mu}m)$. 2. All the endothelial cells of small arterioles and capillaries in the lumbrical muscles of rat digits were continuous type, and they had typical morphological characteristics of continuous endothelial cells : numerous cytoplasmic pinocytic vesicles and many tight junctions between the endothelial cells. 3. In the small arterioles subendothelial layers were irregularly spaced beneath the basal lamina, and membrane to membrane contacts were found between the endothelial cells and smooth muscle cells. 4. Pericytes were often found nearby capillary endothelium, and their cytoplasmic processes surrounded part of endothelial cells. They were enclosed by basal lamina. 5. Smooth muscle cells in tunica media of small arterioles were only one layered, that is, they were terminal arterioles. Sarcoplasm of smooth muscle cell was divided to 2 areas; homogeneous or filamentous area and non-homogeneous perinuclear area. 6. The tunica adventitia contained fibroblasts with extremely attenuated cytoplasmic processes and collagen fibirls.

• Applied Microscopy
• /
• v.34 no.4
• /
• pp.277-283
• /
• 2004

This paper reports that the ultrastructural nature of the interface process between the implants and surrounding bone has been studied after in vivo 1, 4, 8, 12 weeks of implantation of smooth machined implants into rabbit tibias. There was no indication of the fibrous connective tissue formation around the implant that imply intolerance of the bone tissue towards the implant after 1 week of implantation. The regions showing direct bone tissue bonding to the smooth machined implant contained osteoblast activating across the interface in the direction after 4 weeks of implantation. The reaction of a smooth machined implant caused in the first instance formation of an amorphous woven bone, which transformed into a mineralized bone containing collagen fibers. After 8 weeks of implantation, the activities of osteoblast initiated osseointegration forming bone matrix at the interface. During this period, the osteoblast surrounded with a matrix consisting of collagen bundles running in various directions. In the interface area between newly formed bone tissue and implants which has been inserted in rabbit tibias for 12 weeks, the implant and mineralized bone was separated by an amorphous electron dense material layer about $1{\sim}1.5{\mu}m$ in thickness.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.10
• /
• pp.670-677
• /
• 2011

Direct numerical simulation are performed in order to investigate the effect of the circular cylinder shape on the forced convection around a circular cylinder at the Reynolds number of 300 and Prandtl number of 0.71. Three-dimensional characteristics of fluid flow and heat transfer around the smooth, wavy and torsional cylinders are investigated. A wavy cylinder has the sinusoidal variation in the cross sectional area along the spanwise direction with the wave length of ${\pi}/3$ and wavy amplitude of 0.1. A torsional cylinder has the twisted elliptic cross section with a torsional period of ${\pi}/2$ and an axis ratio of 1.35 corresponding to the major axis of 1.15 and the minor axis of 0.85. The value of time-and surface-averaged drag coefficient for the smooth cylinder is similar to that for the wavy cylinder, but larger than that for the torsional cylinder. The time and surface-averaged lift coefficient for the smooth cylinder is larger than that for the wavy and torsional cylinders. The time-averaged local heat transfer rate for the wavy and torsional cylinders shows different distribution along the circumferential direction, compared to that for the smooth cylinder because of the shape change in the spanwise direction for the cases of the wavy and torsional cylinders.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.4
• /
• pp.423-430
• /
• 1998

Single phase heat transfer coefficients were measured for turbulent water flow in a micro-fin tube by using Wilson plot technique. An experiment for counterflow heat exchange between the micro-fin tube and its outer annulus passage was performed. The annulus side heat transfer resistance was varied and the overall heat transfer coefficients were measured. The single-phase heat transfer coefficients in a micro-fin tube were obtained by Wilson plot technique. Nusselt numbers based on the real heat transfer area and the nominal area were about 35% and 50% larger than those for smooth tube respectively Also, single-phase heat transfer correlations based on real heat transfer area and nominal area have been proposed for a micro-fin tube.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.350-357
• /
• 2023

Marine accidents frequently occur due to the unreasonable operation of ships excluded from ship departure control during marine special weather warnings within smooth water areas. Coastal wave buoys installed in smooth water areas are major reference indicators for ship departure control and can be seen as being directly connected to the safety of ships navigating smooth water areas and the coast. In this study, the location appropriateness of currently operating coastal wave buoys and additional installation in the smooth water areas were assessed by analyzing coastal marine accidents over the past 30 years (1991-2020), the main wind direction and wind speed of each major trading port, and the GICOMS ship track data in 2018. The study results showed that an additional coastal wave buoy should be installed at each of the major trading ports(Inchon Port, Pohang Port, Ulsan Port, and Busan Port) and that the location of the coastal wave buoy needs to be moved in the case of Busan Port. Based on various data analysis in this study, the suggestion for an additional installation and movement of the coastal wave buoy presented in this study is expected to contribute to improving the reliability of ship departure control and resolving safety blind spots.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.640-647
• /
• 2012

Current electronic products are dominated by the laser processing and the application will be extended this time. Especially, demands for high precision laser processing with a large area has been increasing for a number of applications such as in solar cell battery, display parts, electronic component and automobile industry. In this paper we designed an on-the-fly system for ultrafast/high precision/large area laser processing. In addition, we have developed the path algorithm for large area. Expansion of the area in which laser processing is an important factor to handle the ultrafast/wide area processing, it will require a processing path. Processing path is path of 2- axis stage and stage of change in velocity can be smooth as possible. We proposed a path of the user concept using NURBS(Non-Uniform Rational B-Spline)method. Through our experiment with the chopper, was to prove the continuity of edge parts. Through basic shape experiments, we proved that large area can be processed using laser. We developed a simulation tool using Visual C++.