• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.408-412
• /
• 2007

It is almost impossible to secure the reproductibility and stability of a commercial Thick-Film Metal Oxide Semiconductor Gas Sensor since it is very difficult to keep the consistency of the manufacturing environment. Thus it is widely known that the general Semiconductor-Oxide Gas Sensors are not appropriate for precise measurement systems. In this paper, the output characteristic analyzer of the various Thick-Film Metal Oxide Semiconductor Gas Sensors that are used to recognize the air quality within an automobile are proposed and examined. The analyzed output characters in a normal air chamber are grouped by sensor ranks and used to fill out the characteristic table of the Thick-Film Metal Oxide Semiconductor Gas Sensors. The characteristic table is used to determine the rank of the sensor that is equipped in the current air cleaner system of an automobile. The proposed air control system can also adapt the on-demand operation that recognizes the history of the passenger's manual-control.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.1-22
• /
• 2007

The energy efficiency of a self-powered wireless sensing system for pressure monitoring in injection molding is analyzed using Bond graph models. The sensing system, located within the mold cavity, consists of an energy converter, an energy modulator, and a ultrasonic signal transmitter. Pressure variation in the mold cavity is extracted by the energy converter and transmitted through the mold steel to a signal receiver located outside of the mold, in the form of ultrasound pulse trains. Through Bond graph models, the energy efficiency of the sensing system is characterized as a function of the configuration of a piezoceramic stack within the energy converter, the pulsing cycle of the energy modulator, and the thicknesses of the various layers that make up the ultrasonic signal transmitter. The obtained energy models are subsequently utilized to identify the minimum level of signal intensity required to ensure successful detection of the ultrasound pulse trains by the signal receiver. The Bond graph models established have shown to be useful in optimizing the design of the various constituent components within the sensing system to achieve high energy conversion efficiency under a compact size, which are critical to successful embedment within the mold structure.

• Journal of the Korean Ceramic Society
• /
• 제52권1호
• /
• pp.23-27
• /
• 2015

Recently, the use of ion-exchange strengthened glass has increased sharply, as it is now used as the cover glass for smart phone devices. Therefore, many researchers are focusing on methods that can be used to strengthen ion-exchange glass. However, research on how the improved strength can be maintained under thermal environment of device manufacturing is still insufficient. We tested the degradation of the characteristics of ion-exchange soda-lime glass samples, including their surface compressive stress characteristics, the depth of the ion-exchange layer (DOL), flexural strength, hardness, and modulus of rupture (MOR) values. Degradation of the characteristics of the ion-exchange glass samples occurred when they were heat-treated at a temperature that exceeded $350^{\circ}C$.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.70-81
• /
• 2020

Plastics that we use and simply throw away have a life span of about 500 years and barely decompose. The practice of producing and using common plastics needs to be challenged. Until now, they have been useful in the industrial structure of mass production, but it can be said that there is a lack of research into new materials to introduce and apply in terms of material recycling. As a result of this, we have come to the uncomfortable realization of the fact that we cannot incinerate or reuse these precious resources indiscriminately. No matter how well-designed a product is, it has a competitive advantage if production and consumption activities, waste, collection, sorting and treatment are considered in terms of a continuous cycle, and in this respect, Extended Producer Responsibility (EPR) can help. We are implementing the EPR system, and active industrialization in the field of recycling is required, which is also a challenge for producers to participate actively in recycling and seek to save and recycle resources in design and manufacturing. Against this backdrop, We would like to examine the possibilities, through various studies and developments on product design of recyclable materials, which is being conducted mainly in Europe. In particular, we would like to examine the methods, and value of solving environmental problems and the active efforts to achieve this in the design world, and in particular the case of product design using recycled plastics.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.155-159
• /
• 1998

This paper describes a research work of developing a computer-aided design and manufacturing (CAD-CAM) of irregular shaped sheet metal product for blanking or piercing and bending operation. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated form plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLIST on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules. the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of unfolding a formed sheet metal to give flat pattern and automatically account for the adjustment of bending allowances to match tooling requirements by checking dimensions and generating NC data automatically according to drawings of die-layout module. Results carried out in each module will provide efficiencies to the designer and the manufacture of blanking or piercing and bending die in this field.

• Convergence Security Journal
• /
• 제20권3호
• /
• pp.3-11
• /
• 2020

The social networking service (SNS) is free, but the data usage fee paid to the telecommunications company and the member's information must be provided directly or indirectly. In addition, while SNS' specifications for transmitting and receiving devices such as smart-phones and PCs are increasing day by day, using universal transmission protocols in special environments such as contaminated areas or semiconductor manufacturing plants where work instructions are mainly made using short messages is not easy. It is not free and has a problem of weak security. This paper verified the practicality through the operation test by implementing IMCP, a low-power, low-cost message transmission protocol that aims to be wearable in special environments such as risk, pollution, and clean zone based on ATmega128.

• IEMEK Journal of Embedded Systems and Applications
• /
• 제15권2호
• /
• pp.79-85
• /
• 2020

IIoT stands for Industrial Internet of Things used in manufacturing, healthcare, and transportation in networked smart factories. Recently, IIoT's environment requires an automated control system through intelligent cognition to improve efficiency. In particular, IIoT can be applied to automatic calibration of production equipment for improved management in industrial environments. Such automation systems require a wireless network for transmitting industrial data. Self-calibration systems in laser transmission paths using wireless networks can save resources and improve production quality by real-time monitoring and remote control of laser transmission path. In this paper, we propose a wireless networked system for self-calibration of laser equipment that requires a laser transmission path, and we show the results of the prototype evaluation. The self-calibration system of laser equipment measures the coordinates of the laser points with sensors and sends them to the host using the proposed application protocol. We propose a wireless network service for the wired motor controller to align the laser coordinates. Using this wireless network, the host controls the motor by sending a control command of the motor controller in an HTTP message based on the received coordinate values. Finally, we build a prototype system of the proposed design to verify the detection performance and analyze the network performance.

• Journal of the Korean Society for Precision Engineering
• /
• 제31권5호
• /
• pp.389-394
• /
• 2014

In this paper, we report a new manufacturing method for friction reduction using micro-AAJ (abrasive air-jet) machining. AAJ machining employs compressed air to accelerate a jet of high-speed particles to mechanically machine features, including micro-channels and micro-holes, into glass, metal, or polymer substrates for use in microfluidics, MEMS (micro electromechanical systems). And we introduce the micro-AAJ machining system, which consists of a micro-AAJ nozzle and a five-axis positioning system. Various micro-AAJ nozzles can be used, depending on the required surface structure, and three-dimensional machining is possible. We machined samples under six different conditions and describe machining results obtained while using it. We also measured the coefficient of friction of micro-textured surfaces. We report the coefficient of friction of micro-textured surfaces patterned using micro-AAJ machining for engine piston ring.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 한국컴퓨터정보학회 2010년도 제42차 하계학술발표논문집 18권2호
• /
• pp.43-46
• /
• 2010

전력산업분야는 스마트그리드 표준체계 및 고도화된 정보통신 인프라의 도입과 보안 그리고 분산전력 등에 대한 신기술 도입에 의해서 급격한 변화기를 맞이하고 있다. 현재 미국과 EU에서는 세계시장을 겨냥해서 스마트그리드의 국제표준화를 주도하고 있으며, 제3세계에서는 전력설비 시장의 지속적 성장이 예상되고 있다. 이에 국내에서도 국제 경쟁력 확보 및 신성장동력 창출을 목표로 연구가 진행 중이다. 전력체계의 운영망과 별개의 시험망 구성이 필요하며, 그 시험망을 통한 검증을 위해 시험망내 표준규격의 통신환경의 설계 및 기능검증은 매우 중요한 요소이다. 본 논문에서는 시험평가망 구성이후 평가를 위해 사용할 수 있는 주요 Component의 설계과정 중의 일부인 IEC 61850기반의 MMS 통신 환경구성 및 기능검증을 위한 연구결과에 대해 설명한다.

• Journal of Distribution Science
• /
• 제11권7호
• /
• pp.47-56
• /
• 2013

Purpose - In the academic literature, the researches on a comparative study on purchase behaviors of the consumers from emerging and mature markets remain limited. Therefore, this empirical study is attempted to examine the effects of country of origin (COO), brand image and corporate image on the purchase behavior of Chinese consumers (as from emerging market) and Korean consumers (as from mature market). Research Design, data, methodology - In total, 615 valid questionnaires were collected from the main cities of China and Korea respectively, and a multiple group analysis was conducted to test the hypotheses with SPSS 16.0 and AMOS18.0. Results - Chinese consumers are not influenced by country-of-origin effect, whereas Korean consumers are sensitive to it. Both Chinese and Korean consumers are sensitive to brand image, whereas corporate image does appear to influence Chinese consumers but not Korean consumers. The effects of country-of-origin are not more influential in less developed market (China) than more developed market (Korea). Conclusions - According to the results of this empirical study, the country-of-origin effect does impact Korean consumers but not Chinese consumers' purchase behavior. Therefore, multinational companies are relatively free to make the decision, if Chinese consumers are the marketing targets, when choosing manufacturing sites.