• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.179-180
• /
• 2011

This paper focuses on the Current-Voltage concurrent control method devoted to the multiple LED (light-emitting diode) string driver. Isolated DC to DC converter with cascaded chopping switch is proposed for smart lighting system such as light with sensor or back light unit of display, which need to control the current of parallel connected multiple LED stings and regulate DC voltage for micro controller for brightness control. The proposed circuit regulates the current of parallel connected multiple LED strings and additional DC voltage output simultaneously. To verify the performance, experimental results are presented based on the prototype board. 5V, 1A voltage mode electric load and two LED strings with different forward voltages are used for output loads. 23W output power is achieved and measured efficiency is in the range of 85%-87%

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.165-172
• /
• 2024

In this paper, we designed a smart home system that can be used intuitively and easily in everyday life, such as sending text messages to users, providing various information and scheduling using smart AI, and providing lighting and atmosphere suitable for the atmosphere in situations such as listening to music using neopixels, as well as using ESP32, RFID, and Google Cloude Console using raspberry pie. As a result of the experiment, it was confirmed that security characters were normally sent to users when RFID was recognized on ESP32 connected to Wi-Fi even if the power was reconnected, and smart AI using Neopixel lighting, Raspberry Pie, and voice recognition, which calculated frequency, also changed the recognition rate over distance, but it worked.

• Journal of Information Technology Services
• /
• v.17 no.3
• /
• pp.53-61
• /
• 2018

In this paper, we propose a car sealing monitoring system combined with ICT Technology. The automobile sealer is an adhesive used to bond inner and outer panels of doors, hoods and trunks of an automobile body. The proposed car sealer monitoring system is a system that can accurately and automatically inspect the condition of the automobile sealer coating process in the general often factory production line where the lighting change is very severe. The sealer inspection module checks the state of the applied sealer using an area scan camera. The vision inspection algorithm is adaptive to various lighting environments to determine whether the sealer is defective or not. The captured images and test results are configured to send the task results to the task manager in real-time as a smartphone app. Vision inspection algorithms in the plant outdoors are very vulnerable to time-varying external light sources and by configuring a monitoring system based on smart mobile equipment, it is possible to perform production monitoring regardless of time and place. The applicability of this method was verified by applying it to an actual automotive sealer application process.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.95-102
• /
• 2014

In this paper, we propose the high speed PLC-based automatic control system for a smart LED streetlight. The proposed the automatic control system were constructed of a power line modem part and monitoring part, streetlight controller part for the high speed communication frequency band and streetlight ballasts characterization and real-time remote control using a high-speed PLC network, and it was designed to meet to lighting grades conditions of KS road lighting standards. The proposed automatic control system were easy monitoring of the power consumption using PC through to the comparison result of the existing streetlight system. As a result, it was confirmed to the possibility of efficient operation for the real-time monitoring and maintenance by induction of reasonable power consumption through to the LED streetlight state checking and remote-control. In addition, we proved to improvement of expected effects for the power cost savings, the energy efficiency, and streetlight differentiation and advanced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.730-739
• /
• 2013

More than 30% of energy in Korea was spent in lighting part and then the consumption level and $CO_2$ emission will be increase from now. In this like situation, control-system construction for street-lamp of a smart grid-based that it has important meaning. Nowadays as a result, as an trying to utilize using Power-line-network communication modem and application a terminal in industrial fields, in this paper, we are want to implement the Power-line-network communication control system of PC-based. Therefore it will be use varied communication test-equipment and tools through the system. For experimentation, using the MODEM was able to use Planet production of based on the ZIC protocol and then the application program use the LabView. The result is primarily focused on equipments control by the PLC, and that we are able to perform each test with PLC equipment for experiment it.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1382-1387
• /
• 2018

There is a high demand for energy efficiency improvement of factories that make up a large part of national electric energy. Therefore, research on smart FEMS technology for monitoring, analyzing and controlling energy consumption patterns is under way, but there is still a lack of research on detailed element technology for communication and control inside the factory. In this paper, we proposed OFDM VLC system based on MODBUS protocol for communication between gateways, sensors, and devices to implement smart FEMS in indoor factory environment. Assuming a conveyor belt load control, we validated the proposed system by simulating the inverter motor control and checking the performance.

• Journal of Platform Technology
• /
• v.6 no.3
• /
• pp.17-22
• /
• 2018

Smart home is a technology for monitoring and controlling all the information about a house by integrating various home applications like cooling, heating, lighting, kitchen and security systems into a network. Although home appliances have become more convenient to use due to the development of smart home technology, they are also more vulnerable to information security hazards. Unauthorized visitors may have access to any of home appliance to arbitrarily control it or acquire information. This causes serious privacy and security problems, which should be solved to further smart home technology. This present paper proposed a dynamic user access control system for privacy protection in smart homes. The proposed system defines the role of a user of smart home services by automatically identifying the status information of the user and dynamically controls the access range for the service. In this way, the privacy of a user can be protected and the inter-smart device service is effectively provided. Consequently, the proposed dynamic user access control for smart home will improve the security service for protecting privacy in smart home devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.505-509
• /
• 2011

Home network system makes it available for controlling inside home and for controlling from outside as well with personal computer, cellular phone or smart phone, by connecting diverse information equipments within home such as lighting, gas, and heating equipments with network. Integrated server and wall-pad, which form home network system, have demerits as saying of being high-priced and of needing to implement network infrastructure. This study suggested the intelligent home network system, which uses smart phone of supplementing these merits of home network system. It substituted high-specification input & output equipment in the currently and widely supplied smart phone for display and touch screen, which are user interface part of the existing wall-pad, and implemented the common wall-pad with low cost by concentrating management and control function of home network on smart phone.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.417-418
• /
• 2023

최근 사용되는 스마트 홈 시스템은 다양한 환경의 효율성, 편안함, 기능성을 추구한다. 하지만 기존 스마트 홈 시스템에는 실내 채광 조절이 블라인드나 커튼과 같이 사람의 관리가 필요로 한 부분이 적용된다. 본 논문은 이를 보완하고자 현재 자동차 및 항공기에 사용되는 스마트 윈도우처럼 주변 조명 조건에 따라 투명도를 조절할 수 있는 스마트 글라스나 필름 사용을 제안한다. 기존 별도의 관리가 필요한 블라인드, 커튼 등과 달리 창문 자체적으로 외부 채광을 조절하고 실내 조명과 연동하여 자동적으로 실내의 환경을 변화시킨다면 사용자의 경제성과 편의성을 증가시키는 효과를 얻을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.66-72
• /
• 2016

An LED lighting control system was developed to combine information technology and LED lights for efficient management and energy savings. The system can monitor and control the status of an LED luminaire using Bluetooth wireless communication, sensor technology, and smart phones. An LED lighting control circuit was designed using a temperature sensor, illumination sensor, and Bluetooth module with a fuzzy constant-current control circuit. We extended the lifetime and prevented damage to the LED by optimizing the supply current of the LED luminaire based on the heat-generation temperature of $70^{\circ}C$ of an LED heat sink. We also automatically adjusted the ON/OFF time depending on the ambient illumination of the LED luminaire. By allowing easy control of the LED luminaires on a smartphone, we improved the efficiency and achieved energy savings. The control system was validated through experiments for normal operation.