• 대한임베디드공학회논문지
• /
• 제10권1호
• /
• pp.7-12
• /
• 2015

As smart phone became popular, its excessive uses cause adverse effects called smart-phone syndrome such as Turtle-neck syndrome in physical side and smart-phone addiction in mental aspects. Turtle-neck syndrome incurred by incorrect posture when you watch smart-phone, which causes a serious health problems. However, these syndromes can be detected by gyro-sensor and timer, and prevented by correcting the posture and halting the function with smart-phone application (App). Thus, this paper proposes App that helps user to realize bad posture and addiction to smart-phone, and to acquire the correct habit by inducing user to stretch neck or to stop operation with warning message. If we tried to adjust bad posture and addiction in using smart-phone through this application, the social losses from smart-phone syndrome would be minimized as a result.

• 한국전문물리치료학회지
• /
• 제20권3호
• /
• pp.19-26
• /
• 2013

The smart-phone has become a necessity for most people. In this study, we determined that using a smart-phone for 20 minutes can cause increased neck and shoulder muscle activities and fatigue. Seventeen healthy male smart-phone users who attended Yonsei University played a smart-phone game for 20 minutes and changes in their bilateral cervical erector spinae and upper trapezius muscle activities and fatigue were measured. To assess muscle activities and fatigue, we used the following variables: the median frequency, the 50th percentile Amplitude probability distribution function (APDF) value (median load), and the discrepancy in the 90th percentile APDF value and the 10th percentile APDF value (APDF range). A paired t-test was used to compare pre-smart-phone-use status with post-smart-phone-use-status. The median frequency of the bilateral cervical erector spinae and the upper trapezius decreased significantly after 20 minutes of smart-phone use (p<.05). In addition, the 50th percentile APDF value of the bilateral cervical erector spinae and the right upper trapezius increased significantly (p<.05). The APDF range of the bilateral cervical erector spinae and the upper trapezius also increased significantly (p<.05). However, the 50th percentile APDF range of the left upper trapezius was not significantly different (p>.05). These findings suggest that using smart-phones for 20 minutes can induce muscle fatigue and increased neck and shoulder muscle activities.

• BMB Reports
• /
• 제54권11호
• /
• pp.575-580
• /
• 2021

Cisplatin is widely known as an anti-cancer drug. However, the effects of cisplatin on mitochondrial function and autophagy-related proteins levels in the skeletal muscle are unclear. The purpose of this study was to investigate the effect of different doses of cisplatin on mitochondrial function and autophagy-related protein levels in the skeletal muscle of rats. Eight-week-old male Wistar rats (n = 24) were assigned to one of three groups; the first group was administered a saline placebo (CON, n = 10), and the second and third groups were given 0.1 mg/kg body weight (BW) (n = 6), and 0.5 mg/kg BW (n = 8) of cisplatin, respectively. The group that had been administered 0.5 mg cisplatin exhibited a reduced BW, skeletal muscle tissue weight, and mitochondrial function and upregulated levels of autophagy-related proteins, including LC3II, Beclin 1, and BNIP3. Moreover, this group had a high LC3 II/I ratio in the skeletal muscle; i.e., the administration of a high dose of cisplatin decreased the muscle mass and mitochondrial function and increased the levels of autophagy-related proteins. These results, thus, suggest that reducing mitochondrial dysfunction and autophagy pathways may be important for preventing skeletal muscle atrophy following cisplatin administration.

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.67-73
• /
• 2018

In this paper, we propose an electronic attendance management system using the bluetooth function of the beacon and BLE advertising function of the smart phone. In the beacon-only bluetooth attendance confirmation system, it is needed more than one beacons according to the class room sizes. A BLE advertising function based attendance confirmation system can not provide the information about the location of the attendances. In the proposed system, we can identify the location of the instructor using the beacon of the class room, and confirm the attendances by checking the position of the attendances's smart phone. In this system, we can achieves the goals of electronic attendance management system using only one beacon per a class room.

• Smart Structures and Systems
• /
• 제7권3호
• /
• pp.223-228
• /
• 2011

An understanding of biomaterials' smart properties and how biocomposite materials are manufactured by cells provides not only bio-inspiration for new classes of smart actuators and sensors but also foundational technology for smart materials and their manufacture. In this case study, I examine the unique smart properties of bone, which are evident at multiple length scales and how they provide inspiration for novel classes of mechanoactive materials. I then review potential approaches to engineer and manufacture bioinspired smart materials that can be applied to solve currently intractable problems such as the need for "smart" body armor or decor cum personal safety devices.

• Computers and Concrete
• /
• 제23권6호
• /
• pp.399-408
• /
• 2019

Structural health monitoring is important for the safety of lives and asset management. In this study, numerical models were developed for the piezoresistive behavior of smart concrete based on finite element (FE) method. Finite element models were calibrated with experimental data collected from compression test. The compression test was performed on smart concrete cube specimens with 75 mm dimensions. Smart concrete was made of cement CEM II 42.5 R, silica fume, fine and coarse crushed limestone aggregates, brass fibers and plasticizer. During the compression test, electrical resistance change and compressive strain measurements were conducted simultaneously. Smart concrete had a strong linear relationship between strain and electrical resistance change due to its piezoresistive function. The piezoresistivity of the smart concrete was modeled by FE method. Twenty-noded solid brick elements were used to model the smart concrete specimens in the finite element platform of Ansys. The numerical results were determined for strain induced resistivity change. The electrical resistivity of simulated smart concrete decreased with applied strain, as found in experimental investigation. The numerical findings are in good agreement with the experimental results.

• 소음진동
• /
• 제8권2호
• /
• pp.267-273
• /
• 1998

This study aims at performing sensitivity analysis of piezoelectric smart structure for minimizing radiated noise from the structure, The structure consists of a flat plate on which disk shaped piezoelectric actuator is mounted, and finite element modeling is used for the structure. The finite element modeling uses a combination of three dimensional piezoelectric, flat shell and transition elements so thus it can take into account the coupling effects of the piezoelectric device precisely and it can also reduce the degrees of freedom of the finite element model. Electric potential on the piezoelectric actuator is taken as a design variable and total radiated power of the structure is chosen as an objective function. The objective function can be represented as Rayleigh's integral equation and is a function of normal displacements of the structure. For the convenience of computation, all degrees of freedom of the finite element equation is condensed out except the normal displacements of the structure. To perform the design sensitivity analysis, the derivative of the objective function with respect to the normal displacements is found, and the derivative of the norma displacements with respect to the design variable is calculated from the finite element equation by using so called the adjoint variable method. The analysis results are compared with those of the finite difference method, and shows a good agreement. This sensitivity analysis is faster and more accurate than the finite difference method. Once the sensitivity analysis program is used for gradient-based optimizations, one could achieve a better convergence rate than non-derivative methods for optimal design of piezoelectric smart structures.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.547-554
• /
• 2016

Analyze the customer daily load patterns, be used to determine the optimal charging and discharging schedule which can minimize the electrical charges through the battery energy storage system(BESS) installed in consumers is an object of this paper. BESS, which analyzes the load characteristics of customer and reduce the peak load, is essential for optimal charging and discharging scheduling to save electricity charges. This thesis proposes optimal charging and discharging scheduling method, using particle swarm optimization (PSO) and penalty function method, of BESS for reducing energy charge. Since PSO is a global optimization algorithm, best charging and discharging scheduling can be found effectively. In addition, penalty function method was combined with PSO in order to handle many constraint conditions. After analysing the load patterns of target BESS, PSO based on penalty function method was applied to get optimal charging and discharging schedule.

• 디지털융복합연구
• /
• 제13권1호
• /
• pp.463-468
• /
• 2015

모바일 플랫폼시장이 확산함에 따라 홈화면의 확보는 기업의 브랜드커뮤니케이션 활동에 있어서 중요한 의미로 받아들여지고 있다. 이에 본 연구는 디바이스 브랜드별 UI차별화를 위해 기본으로 탑재했던 런처의 기본 기능을 넘어서 브랜드 커뮤니케이션 기능을 수행하는 어플리케이션의 확대된 기능으로 변화될 수 있는 특징적 요소를 도출함으로써 스마트폰 어플리케이션으로서의 런처가 브랜드커뮤니케이션으로 어떻게 활용되어지는지를 연구하였다. 런처 구성요소를 속성에 따라 홈구성요소와 개인화기능요소로 구분하여 각 상세 항목에서 나타나는 브랜드 커뮤니케이션의 항목과 특징을 분석한 결과 (1)브랜드 이미지 통합적 요소 (2)서비스마케팅 몰입적 요소로 도출 되었다.

• 한국컴퓨터정보학회논문지
• /
• 제20권6호
• /
• pp.43-50
• /
• 2015

In order to protect important information of smart phone from these security threats, this paper has studied a mechanism for protecting information from the leakage of various information and personal information stored in the smart phone. This paper has configured the basic protection scope for the information protection and applied real time encodement when new contents were created. Also, this paper has applied a security function so that the content of the protected scope can be managed and erased remotely in preparation for loss and burglary.