• 제목/요약/키워드: Smart bus

검색결과 150건 처리시간 0.028초

대중교통 card data를 이용한 통행행태 분석(지하철역 하차후 환승 버스 이용자 중심으로) (Analysis of Public Transport Travel Behavior by using Transport Card Data)

  • 김대성;엄진기;문대섭;최명훈;송지영
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.443-452
    • /
    • 2011
  • 본 연구는 대중교통 카드 자료를 이용하여 대중교통 이용자의 통행행태를 분석한다. 통행행태 분석을 위해 토지 이용방식에 따라 공간적 범위를 주거지역, 업무지역, 쇼핑지역 등 세 종류로 분류하였다. 각 역별 환승 비율 분석 결과 주거지역이 쇼핑지구와 업무지구에 비해 환승 비율이 높게 분석되었으며 주거지역의 경우 마을버스 보다 지선버스 및 간선버스의 통행 비율이 더 높게 나타났다. 또한, 쇼핑지구와 업무지구의 간선 버스 및 기타 버스의 통행 비율이 마을버스 및 지선 버스 보다 더 높게 나타나 토지이용별로 버스 수단 이용에 있어 다소 차이가 있는 것으로 분석되었다. 보행거리는 일반적으로 사용 되어온 400m와 유사한 300m ~ 400m가 최대 보행거리로 분석 되었으며, 일반인보다 청소년의 최대 보행거리가 더 짧은 것으로 나타났다.

  • PDF

네트워크 기반 Steer-by-wire 시스템을 위한 지능형 엑츄에이터 제어 (Control of smart actuators for networked steer-by-wire system)

  • 이동익
    • 센서학회지
    • /
    • 제15권6호
    • /
    • pp.425-432
    • /
    • 2006
  • This paper presents a control algorithm for smart actuators that can be used in a 'steer-by-wire' system for next-generation intelligent automobiles. 'Steer-by-wire' is a network-based mechatronic steering system in which mechanical linkages and hydraulics are replaced by electric motors and a digital communication network. The algorithm is designed not only to achieve the capabilities of following the desired steering angles while minimizing the discrepancy between two steering wheels, but also to tolerate an actuator with faults. The proposed algorithm is based on a simple proportional control so that it can be implemented in real-time with a low-cost embedded microcontroller. The effectiveness of the control algorithm is examined using a hardware-in-the-loop simulator consisting of two DC motors and a CAN bus network.

IoT Connectivity Application for Smart Building based on Analysis and Prediction System

  • COROTINSCHI, Ghenadie;FRANCU, Catalin;ZAGAN, Ionel;GAITAN, Vasile Gheorghita
    • International Journal of Computer Science & Network Security
    • /
    • 제21권9호
    • /
    • pp.103-108
    • /
    • 2021
  • The emergence of new technologies and their implementation by different manufacturers of electronic devices are experiencing an ascending trend. Most of the time, these protocols are expected to reach a certain degree of maturity, and electronic equipment manufacturers use simplified communication standards and interfaces that have already reached maturity in terms of their development such as ModBUS, KNX or CAN. This paper proposes an IoT solution of the Smart Home type based on an Analysis and Prediction System. A data acquisition component was implemented and there was defined an algorithm for the analysis and prediction of actions based on the values collected from the data update component and the data logger records.

A Fabrication and Testing of New RC CMOS Oscillator Insensitive Supply Voltage Variation

  • Kim, Jin-su;Sa, Yui-hwan;Kim, Hi-seok;Cha, Hyeong-woo
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제5권2호
    • /
    • pp.71-76
    • /
    • 2016
  • A controller area network (CAN) receiver measures differential voltage on a bus to determine the bus level. Since 3.3V transceivers generate the same differential voltage as 5V transceivers (usually ${\geq}1.5V$), all transceivers on the bus (regardless of supply voltage) can decipher the message. In fact, the other transceivers cannot even determine or show that there is anything different about the differential voltage levels. A new CMOS RC oscillator insensitive supply voltage for clock generation in a CAN transceiver was fabricated and tested to compensate for this drawback in CAN communication. The system consists of a symmetrical circuit for voltage and current switches, two capacitors, two comparators, and an RS flip-flop. The operational principle is similar to a bistable multivibrator but the oscillation frequency can also be controlled via a bias current and reference voltage. The chip test experimental results show that oscillation frequency and power dissipation are 500 kHz and 5.48 mW, respectively at a supply voltage of 3.3 V. The chip, chip area is $0.021mm^2$, is fabricated with $0.18{\mu}m$ CMOS technology from SK hynix.

Research on the Continuous Use Intention of Mobile Bus Payment App from the Perspective of user Quality Perception

  • Li, Shuo;Sun, Cong-Ying
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권9호
    • /
    • pp.217-224
    • /
    • 2022
  • 본 연구는 D&M 모델과 ECM모델을 기반으로 소비자가 대중교통 모바일 결제 앱을 지속적으로 사용하는 데 영향을 미치는 연구 모델을 구축하였다. 온라인 설문조사를 통해 중국 베이징지역에서 264개의 유효한 설문지를 획득하여 Smartpls3.0으로 분석하였다. 연구 결과는, 지각된 정보의 질, 지각된 시스템의 질, 그리고 지각된 인터페이스 설계의 질은 지각된 유용성과 만족을 통하여 소비자 지속적 사용의도에 유의한 긍정적 영향을 미치는 것으로 나타났다. 지각된 기능의 질은 단지 지각된 유용성만을 통해 지속적 사용의도에 긍정적인 영향을 미치는 것이다.

원전 극한 환경적용을 위한 필드버스 통신망 요건 (Fieldbus Communication Network Requirements for Application of Harsh Environments of Nuclear Power Plant)

  • 조재완;이준구;허섭;구인수;홍석붕
    • 한국IT서비스학회지
    • /
    • 제8권2호
    • /
    • pp.147-156
    • /
    • 2009
  • As the result of the rapid development of IT technology, an on-line diagnostic system using the field bus communication network coupled with a smart sensor module will be widely used at the nuclear power plant in the near future. The smart sensor system is very useful for the prompt understanding of abnormal state of the key equipments installed in the nuclear power plant. In this paper, it is assumed that a smart sensor system based on the fieldbus communication network for the surveillance and diagnostics of safety-critical equipments will be installed in the harsh-environment of the nuclear power plant. It means that the key components of fieldbus communication system including microprocessor, FPGA, and ASIC devices, are to be installed in the RPV (reactor pressure vessel) and the RCS (reactor coolant system) area, which is the area of a high dose-rate gamma irradiation fields. Gamma radiation constraints for the DBA (design basis accident) qualification of the RTD sensor installed in the harsh environment of nuclear power plant, are typically on the order of 4 kGy/h. In order to use a field bus communication network as an ad-hoc diagnostics sensor network in the vicinity of the RCS pump area of the nuclear power plant, the robust survivability of IT-based micro-electronic components in such intense gamma-radiation fields therefore should be verified. An intelligent CCD camera system, which are composed of advanced micro-electronics devices based on IT technology, have been gamma irradiated at the dose rate of about 4.2kGy/h during an hour UP to a total dose of 4kGy. The degradation performance of the gamma irradiated CCD camera system is explained.

교통카드 자료를 이용한 서울시 지역별 대중교통 수단 선택 공간상관성 분석 (The Spatial Correlation of Mode Choice Behavior based on Smart Card Transit Data in Seoul)

  • 박만식;엄진기;허태영
    • 응용통계연구
    • /
    • 제26권4호
    • /
    • pp.623-634
    • /
    • 2013
  • 본 연구에서는 교통 분석존(서울시 행정동) 단위별로 대중교통 수단(버스, 도시철도)선택에 있어서 공간 상관성이 존재하는지 여부를 대중교통카드 자료를 기반으로 제시한다. 분석결과 버스를 탑승한 비율이 높은 지역들이 서로 이웃하여 그룹을 형성하고 있으며, 이들 지역은 도시철도 역사의 수가 버스 정류장에 비해 매우 적기 때문인 것으로 분석되었다. 버스에 탑승한 비율이 비슷한 그룹 간에는 공간 상관성이 존재하는 것으로 통계분석결과 나타났으며, 이러한 공간상관성은 향후 대중교통 수단선택 모형 구축에 고려할 수 있을 것으로 판단된다. 대중교퉁 수단선택에 있어 공간상관성의 존재는 대중교통 운영기관이 향후 대중교통카드를 기반으로 대중교통 노선계획, 운영계획을 수립함에 있어 중요한 정보가 될 것으로 기대된다.

스마트카드용 고성능 자바가상기계에 대한 연구 (A study on high performance Java virtual machine for smart card)

  • 정민수
    • Journal of the Korean Data and Information Science Society
    • /
    • 제20권1호
    • /
    • pp.125-137
    • /
    • 2009
  • 스마트카드는 작은 크기의 마이크로 컴퓨터칩을 내장하고 있다. 이 칩은 프로세서, RAM, ROM, 클럭, 버스 그리고 암호전용 코프로세서 등을 포함하고 있다. 따라서 이 칩은 RFID 태그와 비교해서 가격이 비싸고, 복잡하지만 안전한 칩이다. 스마트카드의 주요 응용분야는 전자뱅킹이나 안전한 통신 관련 분야이다. 자바카드는 개방형 플랫폼 중 가장 널리 사용되는데 그 이유는 자바카드의 보안성, 플랫폼 독립성, 그리고 빠른 개발 싸이클 때문이다. 하지만 자바카드는 실행속도가 느리기 때문에 자바 카드의 성능개선은 중요한 연구 분야가 되어왔다. 본 논문에서는 효과적인 트랜잭션버퍼 관리 방법을 제안하여 자바카드의 성능을 개선시켰으며 실험을 통하여 그 성능을 입증하였다.

  • PDF

저비용 네트워크 기반 임베디드 시스템을 위한 시간동기 기술 (Fault-tolerant clock synchronization for low-cost networked embedded systems)

  • 이동익
    • 센서학회지
    • /
    • 제16권1호
    • /
    • pp.52-61
    • /
    • 2007
  • Networked embedded systems using the smart device and fieldbus technologies are now found in many industrial fields including process automation and automobiles. However the discrepancy between a node's view of current time and the rest of the system can cause many difficulties in the design and implementation of a networked system. To provide a networked system with a global reference time, the problem of clock synchronization has been intensively studied over the decades. However, many of the existing solutions, which are mainly developed for large scale distributed computer systems, cannot be directly applied to embedded systems. This paper presents a fault-tolerant clock synchronization technique that can be used for a low-cost embedded system using a CAN bus. The effectiveness of the proposed method is demonstrated with a set of microcontrollers and DC motor-based actuators.

고속분할법의 수렴특성 개선에 관한 연구 (Research on the Improvement of Convergence Characteristics of the Fast Decoupled Load Flow)

  • 이인용
    • 한국전기전자재료학회논문지
    • /
    • 제25권5호
    • /
    • pp.403-408
    • /
    • 2012
  • In this paper, we propose useful load flow algorithms called FEDL (fast enhanced decoupled load flow). The proposed load flow method can improve the convergence characteristics particularly when the P-Q coupling becomes significant and the power system operating states deviate from the conditions required for stable convergence of the FDL by reflecting in part the effects of the off-diagonal terms in the Jacobian. In our test with IEEE AEP-30 bus system and RTS-96 73-bus system, it converge even when the fast decoupled load flow (FDL) and its variations keeping load flow matrices constant experience convergence problems. Test results show promising performances of the proposed algorithms in their convergence characteristics both in number of iterations and overall convergence speeds.