• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.41-54
• /
• 2022

The purpose of this study was to propose a "user experience (UX)-centered product development process" so that the product design development process using the service design process can be systematized and used in practice. In a situation in which usability research on office phones is lacking compared to general home phones, this study expands to a product-based service design point of view rather than simple product development, intending to research ways to provide user experience value through office phone design in smart office. This study focused on extracting UX-centered user needs using the service design process and developing product design that realizes user experience value. In particular, the service design process was applied to systematically extract user needs and experience value elements in the product development process and to discover ideas that were converged with product-based services. For this purpose, the "Double Diamond Design Process Model," which is widely used in the service design field, was adopted. In addition, a product design development process was established so that usability improvement plans, user experience value elements, and product-service connected ideas could be extracted through a work-flow in which real users and people from various fields participate. Based on the double diamond design process, in the "Discover" information collection stage, design trends were identified mainly in the office phone markets. In the "Define" analysis and extraction stage, user needs were analyzed through user observation, interview, and usability survey, and design requirements and user experience issues were extracted. Persona was set through user type analysis, and user scenarios were presented. In the "Develop" development stage, ideation workshops and concept renderings were conducted to embody the design, and people from various fields within the company participated to set the design direction reflecting design preference and usability improvement plans. In the "Deliver" improvement/prototype development/evaluation stage, a working mock-up of a design prototype was produced and design and usability evaluation were conducted through consultation with external design experts. It is meaningful that it established a "UX-centered product development process" model that converged with the existing product design development process and service design process. Ultimately, service design-based product design development process was presented so that I Corp.'s products could realize user experience value through service convergence.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.229-236
• /
• 2013

This study defined that the construct of work-family is not the opposite meaning but the construct having positive synergy effects each other. For more meaningful implications to HR partitioner in the era of smart working, Data collection was done from the manufacturing companies in Kyungsangnamdo and hierarchical regression was conducted. we investigated the relationship between work-family facilitation and organizational commitment and moderating effect of perceived organizational support between work-family facilitation and organizational commitment. Based on the result, we have proposed some implications. First, we should study more detail processes between work-family facilitation and organizational commitment not only continuous commitment but also affective and normative commitment. Second, we could know that not only work-family balance but also work-family facilitation could positively impact on organizational commitment, there when we design the job of employees, we should consider the family issues of job holder.

• Spatial Information Research
• /
• v.22 no.4
• /
• pp.89-102
• /
• 2014

The establishment and operation of Region-based Teleworking Centers(RTC) in Korea is in the initial stage at the moment. Although some studies have been conducted on telecommuting at home, few studies have been performed on the effects of all-out expansion and diffusion of region-based Teleworking Centers. Therefore, this study analyzed the reduction effect of commuting distance which is possible to obtain from the establishment of Teleworking Centers, based on the network in the Seoul Metropolitan Area, Subsequently, quantitative reduction of the effects of $CO_2$ were calculated from region-based Teleworking Centers. The results of the analysis indicated that region-based Teleworking Centers could reduce a total of 911 tons of $CO_2$ per day. When applying these results to 258 working days per year (according to Statistics Korea), 235,056 tons of $CO_2$ can be reduced annually by the establishment of Teleworking Centers. With quantity on environmental utility to be obtained from the establishment of Teleworking Centers, this study can be utilized as a guideline for selecting effective locations of Teleworking Centers in the future. It can also be helpful in decisions to determine the priority of extending operations of Teleworking Centers through comparisons among administrative districts.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.68-74
• /
• 2017

This paper presents a joint demosaicking and arbitrary-ratio down sampling algorithm for color filter array (CFA) images. Color demosaiking is a necessary part of image signal processing pipeline for many types of digital image recording system using single sensor. Also, such as smart phone, obtained high resolution image from image sensor has to be down-sampled to be displayed on the screen. The conventional solution is "Demosaicking first and down sampling later". However, this scheme requires a significant amount of memory and computational cost. Also, artifacts can be introduced or details get damaged during demosaicking and down sampling process. In this paper, we propose a method in which demosaicking and down sampling are working simultaneously. We use inverse mapping of Bayer CFA and then joint demosaicking and down sampling with arbitrary-ratio scheme based on signal decomposition of high and low frequency component in input data. Experimental results show that our proposed algorithm has better image quality performance and much less computational cost than those of conventional solution.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.209-220
• /
• 2007

IPS(Intrusion Prevention Systems), which is installed in inline mode in a network, protects network from outside attacks by inspecting the incoming/outgoing packets and sessions, and dropping the packet or closing the sessions if an attack is detected in the packet. In the signature based filtering, the payload of a packet passing through IPS is matched with some attack patterns called signatures and dropped if matched. As the number of signatures increases, the time required for the pattern matching for a packet increases accordingly so that it becomes difficult to develop a high performance US working without packet delay. In this paper, we propose a high performance IPS based on signature hashing to make the pattern matching time independent of the number of signatures. We implemented the proposed scheme in a Linux kernel module in a PC and tested it using worm generator, packet generator and network performance measure instrument called smart bit. Experimental results show that the performance of existing method is degraded as the number of signatures increases whereas the performance of the proposed scheme is not degraded.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.5
• /
• pp.141-150
• /
• 2014

In recent years, because of the development of ubiquitous technology in healthcare research is actively progress. Especially, healthcare service area is change to home for the elderly or patients from hospital. The technology to identify residents in a home is crucial for smart home application services. However, existing researches for resident identification have several problems. In this case, residents are needed to attach of various sensors on their body. Also relating private life, it is difficult to apply to resident's environment. In this paper, we used constraint-free sensor and unconscious sensor to solve these problems and we limited using of sensor and indoor environment in the way of working economical price systems. The way of multi-resident identification using only these limited sensors, we selected elements of personal identifications and suggested the methods in giving the weight to apply these elements to systems. And we designed the SABA mechanism to tract their location and identify the residents. It mechanism can distinguish residents through the sensors located each space and can finally identify them by using the records of their behaviors occurred before. And we applied the mechanism designed for applications to approve this location tracking system. We verified to the location tracking system performance according to the scenario.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.261-270
• /
• 2015

In information security devices, such as Smart Cards, vulnerabilities of the RSA algorithm which is used to protect the data were found in the Side Channel Analysis. The RSA is especially vulnerable to Power Analysis which uses power consumption when the algorithm is working. Typically Power Analysis is divided into SPA(Simple Power Analysis) and DPA(Differential Power Analysis). On top of this, there is a CA(Collision Analysis) which is a very powerful attack. CA makes it possible to attack using a single waveform, even if the algorithm is designed to secure against SPA and DPA. So Message blinding, which applies the window method, was considered as a countermeasure. But, this method does not provide sufficient safety when the window size is small. Therefore, in this paper, we propose a new countermeasure that provides higher safety against CA. Our countermeasure is a combination of message and exponent blinding which is applied to the window method. In addition, through experiments, we have shown that our countermeasure provides approximately 124% higher attack complexity when the window size is small. Thus it can provide higher safety against CA.

• Journal of Food Hygiene and Safety
• /
• v.31 no.3
• /
• pp.216-221
• /
• 2016

This study was performed to evaluate the bactericidal efficacy of a fumigation disinfectant containing 35% paraformaldehyde against Salmonella Typhimurium (S. Typhimurium). In this study, the efficacy test of a fumigant against S. Typhimurium was carried out according to French standard NF T 72-281. The S. Typhimurium working culture suspension number (N value), all bacteria numbers on the carriers exposed to the fumigant (n1, n2, and n3), the number of bacterial suspensions by the pour plate method (N1), the number of bacterial suspensions by the filter membrane method (N2), and the mean number of bacteria recovered on the control carriers (T value), were obtained from the preliminary test. In addition, the reduction number of S. Typhimurium exposed to the fumigant (d value) was calculated using the T value, the mean number of bacteria in the recovery solution (n'1) and the mean number of bacteria on carriers plated in agar (n'2). The N value was $5.5{\times}10^8$ colony forming units (CFU)/mL, and n1, n2, and n3 were higher than 0.5N1, 0.5N2 and 0.5N1, respectively. Additionally, the T value was $3.5{\times}10^6CFU/carrier$. In terms of the bactericidal effect of the fumigant, the d value was 5.25. According to the French standard for fumigants, the d value for an effective bactericidal fumigant should be greater than 5. The results indicated that the fumigant containing 35% paraformaldehyde had an efficient bactericidal activity against S. Typhimurium, and, therefore, can be used to disinfect food materials and kitchen appliances contaminated with foodborne bacteria.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2013

With the rising popularity of smart-phones, the supply of Internet protocol television is largely increased and it causes the wireless communication network load to be increased. To overcome such an overloading problem, 3GPP is now working on the standardization of MBMS since LTE Release 6 specification. MBMS has good performance in bandwidth efficiency by sharing the same bandwidth with the mulitple MBMS users having the same content. According to the proposed algorithm, in heterogeneous networks having a dispersed Single-cell MBMS where 3GPP network and Wi-Fi network are mixed, if the number of MBMS users, who are belonging to cells supporting a dispersed Single-cell MBMS, is more than a specified threshold, the MBMS priority policy is operated. Otherwise, the Wi-Fi priority policy is executed. As the simulation results show both the increase of total available bandwidth ratio and the decrease of network usage cost, it is confirmed that the proposed scheme allows the network efficiency to be maximized.