• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.125-133
• /
• 2012

This paper deals with the passenger transfer trips counted from smart bus-card data from Seoul transit network to understand the current operational condition of the system. Objective of this study is to relocate the location of the transit transfer centers. It delivers a bi-level programing model. The upper model is a linear 0-1 binary integer program having the objective of total travel cost minimization constrained by the number of transfer centers and the total construction budget. The lower model is an user equilibrium assignment model determining the passengers' route choice according to the transfer center locations. The proposed bi-level programming model was tested in an example network. The result showed that the proposed was able to find the optimal solution.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.457-465
• /
• 2014

This study proposes a policy for urban railway travel demand management system in order to decrease the load factor of the Seoul metro Circle line, particularly for the segment between Sadang and Samsung stations, through analyzing the transit smart card data. We propose mixed train operations of the existing Circle line and a line that goes toward Samsung station in order to transport passengers that have two distinct groups: those with the destination of Samsung station and those with destinations after Samsung station. The introduction of a mixed train operation that encourages passengers passing through Samsung station to take a Circle line train will decrease the congested load factor by 11.3% during the morning peak hours using the mixed train operation of the Circle and Samsung lines. This policy could be an effective method to decrease the load factor and improve the comfort of rail passengers without extra investment in the railway facilities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.23-30
• /
• 2019

Automobiles are largely divided into passenger cars with less than five passengers and commercial vehicles such as construction machines, trucks, mixers, special lorries, and large buses. Automobile maintenance companies are also divided into passenger cars and commercial vehicles. Because commercial vehicles are the livelihood vehicles of individual carriers engaged in cargo transportation, passenger transportation, and construction, fast and accurate maintenance is important. Access to the expressway is also important because the car is large and uses highways. In addition, the time required for troubleshooting is long, so sufficient space must be secured for parking the vehicle, and ease of entry and exit of the vehicle in the maintenance shop should be fully considered. For this reason, commercial vehicle maintenance companies have higher initial investment costs than car maintenance companies, and it is difficult to supply and maintain maintenance personnel. Therefore, it is necessary to carefully examine and analyze various related factors for successful commercial vehicle maintenance company selection. However, most existing commercial vehicle maintenance companies often choose their location based on the empirical judgment of the founder, the customs and the case, without a clear analysis. In this study, we show how to derive the location selection factors to be considered when establishing professional maintenance company for commercial vehicles and to select the optimal location by using AHP (Analytic Hierarchy Process) method.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.529-534
• /
• 2020

The development of civilization is in line with evolution of cities and transportation technology caused by industrialization. Up to now, a city has been developed owing to transportation cost reduction and needs for land utilization as a limited core business district. Continuous increase of urban population density has accompanied by lots of problems socioeconomically such as rise of land value, traffic congestion, gap between the rich and poor, air pollution, etc. Those issues are difficult to be solved in existing city ecosystem. However, a clue for solving the problems could be found in there. The design of Seoul mid-night bus route was from analysis of movement of people in the rural area by using ICT so that a city ecosystem should be firstly analyzed for solving rural issues. If the cause of those is found, big data platform construction is required to raise the life quality of citizen and the problems could be solved. Big data should be located in the middle of the platform connected with every element of city based on ICT for real-time collection, analysis and application. This paper addresses construction of big data platform and its application for sustainable smart city.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.415-426
• /
• 2013

Condition assessment and monitoring of bridges is critical for safe passenger travel, public transportation, and efficient freight. In monitoring, displacement measurement capability is important to keep track of performance of bridge, in part or as whole. One of the most important parts of a bridge is the expansion joint, which accommodates continuous cyclic thermal expansion of the whole bridge. Though expansion joint is critical for bridge performance, its inspection and monitoring has not been considered significantly because the monitoring requires long-term data using cost intensive equipment. Recently, a wireless smart sensor network (WSSN) has drawn significant attention for transportation infrastructure monitoring because of its merits in low cost, easy installation, and versatile on-board computation capability. In this paper, a rapid wireless displacement monitoring system, wireless hybrid sensor (WHS), has been developed to monitor displacement of expansion joints of bridges. The WHS has been calibrated for both static and dynamic displacement measurement in laboratory environment, and deployed on an in-service highway bridge to demonstrate rapid expansion joint monitoring. The test-bed is a continuous steel girder bridge, the Founders Bridge, in East Hartford, Connecticut. Using the WHS system, the static and dynamic displacement of the expansion joint has been measured. The short-term displacement trend in terms of temperature is calculated. With the WHS system, approximately 6% of the time has been spent for installation, and 94% of time for the measurement showing strong potential of the developed system for rapid displacement monitoring.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.653-667
• /
• 2019

Using cross-ties to connect cables together when forming a cable network is regarded as an efficient method of mitigating cable vibrations. Cross-ties have been extended and fixed on bridge decks or towers in some engineering applications. However, the dynamics of this kind of system need to be further studied, and the effects of extending cross-links to bridge decks/towers on the modal response of the system should be assessed in detail. In this paper, a system of two cables connected by an inter-supported cross-link with another lower cross-link extended to the ground is proposed and analyzed. The characteristic equation of the system is derived, and some limiting solutions in closed form of the system are derived. Roots of cable system with special configurations are also discussed, attention being given to the case when the two cables are identical. A predictable mode behavior was found when the stiffness of inter-connection cross-link and the cross-link extended to the ground were the same. The vector of mode energy distribution and the degree of mode localization index are proposed so as to distinguish global and local modes. The change of mode behaviors is further discussed in the case when the two cables are not identical. Effects of cross-link stiffness, cross-link location, mass-tension ratio, cable length ratio and frequency ratio on $1^{st}$ mode frequency and mode shape are addressed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.28-38
• /
• 2019

The smart card data stores the transit usage records of individual passengers. By using this, it is possible to analyze the traffic demand by station and time. However, since the purpose of the trip is not recorded in the smart card data, the demand for each purpose such as commuting, school, and leisure is estimated based on the survey data. Since survey data includes only some samples, it is difficult to predict public transport demand for each purpose close to the complete enumeration survey. In this study, we estimates the purposes of trip for individual passengers using the smart card data corresponding to the complete enumeration survey of public transportation. We estimated trip purposes such as commute, school(university) considering frequency of O-D, duration, and departure time of a passenger. Based on this, the passengers are classified as workers and university students. In order to verify our methodology, we compared the estimation results of our study with the patterns of the survey data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.49-63
• /
• 2019

Crowdedness management at subway platforms is essential to improve services, including the prevention of train delays and ensuring passenger safety. Establishing effective crowdedness mitigation measures for platforms requires accurate estimation of the congestion level. There are temporal and spatial constraints since crowdedness on subway platforms is assessed at certain locations every 1-2 years by hand counting. However, smart cards generate real-time big data 24 hours a day and could be used in estimating congestion. This study proposes a model based on data from transit cards to estimate crowdedness dynamically. Crowdedness was defined as demand, which can be translated into passengers dynamically moving along a subway network. The trajectory of an individual passenger can be identified through this model. Passenger flow that concentrates or disperses at a platform is also calculated every minute. Lastly, the platform congestion level is estimated based on effective waiting areas for each platform structure.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.57-69
• /
• 2022

Even though demand to charge EV(electric vehicles) is increasing, there are some problems to construct EV charging stations and problems from deficient them. Typical problem of EV charging stations is discordance for EV charging station location with its demand. This study investigates methods to determine the optimized location for fast EV charging stations considering charging demand in Seoul. Firstly, variables influencing on determination of determine the optimized location for fast EV charging stations were decided, and then evaluation of weights of the variables and data collection were conducted. Using the weights, location potential scores for each area-cell were calculated and optimized locations for fast EV charging stations were resulted.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.153-169
• /
• 2022

With the extension of the average life span and the rapid aging of the population, defining elderly population as a single group is difficult as the physical, economic and social conditions of individual have become different. Therefore, policies that take into account the characteristics of each group are required. The purpose of this study is to classify individual travel types and to analyze the characteristics of each travel type, based on individual public transportation trajectory data as known as smart card data. Among the four classified types, the long-distance low-frequency stay type and the short-range medium-frequency mobile type show external activity traffic characteristics for retirement leisure, while the long-distance high-frequency stay type and the long-distance high-frequency mobile group include regular commuting. Traffic variability and residence areas of stay were identified in terms of each classified travel type. The results of this study provide the important suggestions for establishing a transportation policy that takes into account the characteristics of each type of elderly population in Seoul.