• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.497-502
• /
• 2010

발전회사는 설비 신뢰성과 이용율 저하없이 운영 및 정비비용을 낮추라는 요구를 받고 있다. 설비 운영자는 이러한 요구사항에 부합하기 위하여 현재의 정비기술에 대하여 다시 평가를 하고 있다. 정비비용을 낮추고 효율적인 운영 기간을 늘리기 위하여 설비의 최적 운영상태를 확인할 수 있는 비파괴기술을 이용하여 예측정비 기법을 적용할 수 있다. 예측정비 프로그램에는 내부운영 프로그램과 외부프로그램 그리고 혼용 프로그램이 있으며, 현명한 신뢰 (smart thrust)개념을 사용하면 예측정비 프로그램을 성공적으로 적용할 수 있다.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.209-215
• /
• 2011

Currently, 10% of the domestic aircraft accidents and 9% of delays and cancellations were generated due to poor maintenance. Aircraft maintenance work is divided into works in material warehouse and in hangar. In material warehouse, the problem in aircraft maintenance work is occurred when the serial number of parts are identified and entered. In hangar, work order are duplicatively written. In addition, the maintenance information is not shared and then work order is wrong delivered. In this study, we analyzed the maintenance process and the informations that occurs in the material warehouse and hangar for large airline company to solve the problems. And serial numbers are replaced by QR code. And documented work order and manual are handled using the tablet PC. In conclusion, this paper studied smart work of maintenance process about tire parts. We expect to improve the inefficiency of identification of serial number and total maintenance time is reduced by real-time information sharing.

• Structural Monitoring and Maintenance
• /
• 제5권4호
• /
• pp.489-506
• /
• 2018

This paper reported test of full-scale cables attached with four types of dampers: viscous damper, passive Magneto-Rheological (MR) damper, friction damper and High Damping Rubber (HDR) damper. The logarithmic decrements of the cable with attached dampers were calculated from free vibration time history. The efficiency ratios of the mean damping ratios of the tested four dampers to theoretical maximum damping ratio were derived, which was very important for practical damper design and parameter optimization. Non-ideal factors affecting damper performance were discussed based on the test results. The effects of concentrated mass and negative stiffness were discussed in detail and compared theoretically. Approximate formulations were derived and verified using numerical solutions. The critical values for non-dimensional concentrated mass coefficient and negative stiffness were identified. Efficiency ratios were approximately 0.6, 0.6, and 0.3 for the viscous damper, passive MR damper and HDR damper, respectively. The efficiency ratio for the friction damper was between 0-1.0. The effects of concentrated mass and negative stiffness on cable damping were positive as both could increase damping ratio; the concentrated mass was more effective than negative stiffness for higher vibration modes.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.669-682
• /
• 2019

Vibration mitigation of cables or hangers is one of the crucial problems for cable supported bridges. Previous research focused on the behaviors of cable with dampers or crossties, which could help engineering community apply these mitigation devices more efficiently. However, less studies are available for hybrid applied cross-ties and dampers, especially lack of both analytical and experimental verifications. This paper studied damping and frequency of two parallel identical cables with a connection cross-tie and an attached damper. The characteristic equation of system was derived based on transfer matrix method. The complex characteristic equation was numerically solved to find the solutions. Effects of non-dimensional spring stiffness and location on the maximum cable damping, the corresponding optimum damper constant and the corresponding frequency of lower vibration mode were further addressed. System with twin small-scale cables with a cross-link and a viscous damper were tested. The damping and frequency from the test were very close to the analytical ones. The two branches of solutions: in-phase modes and the out-of-phase modes, were identified; and the two branches of solutions were different for damping and frequency behaviors.

• 한국건설관리학회논문집
• /
• 제22권1호
• /
• pp.72-80
• /
• 2021

지난해 기준 국내 30년이 넘은 노후화 건축물이 37%를 차지하고 있으며, 건물 노후화 수치가 점차적으로 늘어남에 따라, 건물유지보수의 필요성이 대두되고 있다. 건물의 유지보수를 위해서는 많은 작업 주체가 참여하여 업무를 진행한다. 그 중 '유지보수 관리자'의 업무가 가장 큰 비중을 차지한다. 현재 업무를 살펴보면 유지보수 건축물의 이력관리를 도면 혹은 수기로 기록하여 보관하는 방식으로 진행되고 있으며, 해당 자료를 재 열람하기 위해서는 많은 시간이 소모된다. 이에 본 연구에서는 작업자의 유지관리 업무 편의성 향상과 이력관리를 최적화 하기위해 기존 유지보수 프로세스를 파악하고, 분석하여 문제점을 도출하고 스마트 디바이스 기반의 자동화 모델을 구축하였다. 본 연구는 스마트 디바이스 기반의 자동화 모델 구축을 위하여, ① 일반적인 시설물 관리 프로세스 분석 및 관련 문헌 검토, ② 현재 유지보수 프로세스 개선, ③BIM Data, COBie Data, IoT 및 AR 기술을 기반으로 유지보수 관리 자동화 모델 기능 구성도 제작, ④ 스마트 디바이스 기반 유지보수 관리 자동화 모델 구축, ⑤ 사례 현장 적용, 유지보수 관리 진행 및 이력정보 재검토 소요 시간 비교를 통한 시스템 검증을 실시하였다.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.513-522
• /
• 2017

오늘날 세계는 빠르게 도시화가 되어가고 있으며 급속한 도시화에 따른 인구밀집현상은 교통 혼잡, 생태환경악화 등 도시의 전형적인 문제들을 초래하였으며, 폐기물 처리 및 공공위생, 치안 문제 등 도시 관리의 어려움은 점점 증대하고 있다. 특히 도시시설물 관리에 있어 정부와 지자체의 노력에도 불구하고 관리대상의 시설물 수와 종류가 많은 반면 관리인의 부족과 적정관리시스템의 부재로 인하여 도시민들이 많은 불편을 겪고 있다. 본 연구의 목적은 도시시설물의 유지관리 효율화를 위해 스마트폰을 활용한 관리방법을 제시하는 것이다. 연구결과 첫째, 스마트폰을 활용하여 시설물의 사진과 위치정보를 수집 및 전송하기 때문에 시설물의 정보관리, 유지보수관리, 이력관리 등 원스톱으로 유지관리 업무가 가능하다. 둘째, 유지보수관리는 스마트폰의 위치가 아닌 시설물, 즉, 피사체의 위치 및 사진정보를 기반으로 하기 때문에 시설물의 상태파악 및 빠른 조치가 용이하며, 스마트폰의 앱을 통해 유지보수 관리자에게 접수와 동시에 정보가 전송되기 때문에 효율적이다. 셋째, 시설물의 정보 및 각종 자료와 도면을 데이터베이스로 관리하기 때문에 이력관리 및 데이터의 활용이 용이하다. 넷째, 스마트폰의 앱을 통해 도시민 누구나 쉽게 활용이 가능하기 때문에 별도의 인프라 투자 없이 시설물관리자 기능으로서 확대가 용이하다. 마지막으로 위치 정보 기반으로 도로, 수목, 산책로 등 비 시설물의 관리가 가능하다.

• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.517-530
• /
• 2008

This paper deals with civil infrastructures in general, sensor and smart structure technology, and smart steel structures in particular. Smart structures technology, an integrated engineering field comprising sensor technology, structural control, smart materials and structural health monitoring, could dramatically transform and revolutionize the design, construction and maintenance of civil engineering structures. The central core of this technology is sensor and sensor networks that provide the essential data input in real time for condition assessment and decision making. Sensors and robust monitoring algorithms that can reliably detect the occurrence, location, and severity of damages such as crack and corrosion in steel structures will lead to increased levels of safety for civil infrastructure, and may significantly cut maintenance or repair cost through early detection. The emphasis of this paper is on sensor technology with a potential use in steel structures.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.23-30
• /
• 2019

Automobiles are largely divided into passenger cars with less than five passengers and commercial vehicles such as construction machines, trucks, mixers, special lorries, and large buses. Automobile maintenance companies are also divided into passenger cars and commercial vehicles. Because commercial vehicles are the livelihood vehicles of individual carriers engaged in cargo transportation, passenger transportation, and construction, fast and accurate maintenance is important. Access to the expressway is also important because the car is large and uses highways. In addition, the time required for troubleshooting is long, so sufficient space must be secured for parking the vehicle, and ease of entry and exit of the vehicle in the maintenance shop should be fully considered. For this reason, commercial vehicle maintenance companies have higher initial investment costs than car maintenance companies, and it is difficult to supply and maintain maintenance personnel. Therefore, it is necessary to carefully examine and analyze various related factors for successful commercial vehicle maintenance company selection. However, most existing commercial vehicle maintenance companies often choose their location based on the empirical judgment of the founder, the customs and the case, without a clear analysis. In this study, we show how to derive the location selection factors to be considered when establishing professional maintenance company for commercial vehicles and to select the optimal location by using AHP (Analytic Hierarchy Process) method.

• 한국BIM학회 논문집
• /
• 제10권3호
• /
• pp.1-11
• /
• 2020

The introduction of BIM technology is expanding not only in the field of design and construction, but also in the maintenance and use stage. In particular, researchers are looking to build a smart facility management system that integrates advanced IT technology and BIM. This study proposes the parts to be used and added to the BIM information, focusing on information generated and exchanged in the application case that is an issue during the current facility maintenance work by introducing the smart facility management technology and its use cases. The effectiveness of this proposal is compared with the scenario in which BIM-based facility safety management is applied and the current business scenario. In conclusion, the requirements for smart facility management are analyzed, and linkable parts between facility management tasks and BIM data that should be reflected in the facility management system are presented. In the maintenance phase, through the use case scenario, the facility management phase is subdivided according to the characteristics and contents of the work. In addition, information about the facilities required for each task is specified. Furthermore, it is examined whether BIM data and IT information can be linked with existing facility management systems. It is a process and guideline that can be provided to practitioners who want to introduce BIM and smart technology to facility management. It can define the required data items and levels according to the required information step by step based on the maintenance case.

• 대한안전경영과학회지
• /
• 제26권2호
• /
• pp.43-53
• /
• 2024

This study analyzes the importance-performance analysis (IPA) of the 10 dimensions of the smart construction safety management system, and analyzes which dimensions are important and which dimensions are performing to determine key improvement tasks, incremental improvement tasks, Maintenance and reinforcement tasks and continuous maintenance tasks were derived. Among the 10 dimensions of the smart construction safety management system, the dimensions that are recognized as important by all field managers and field workers and have high performance are the automatic risk displacement measurement system, smart environmental sensor system, and heavy equipment seizure prevention system. However, areas that were perceived as having high importance but low performance were worker location tracking systems, smart safety helmet chin muscles, and smart safety ring fastening. Among the smart construction safety management systems perceived by field managers, areas for key improvement with high importance and low performance included worker location tracking system and smart safety ring fastening. Among the smart construction safety management systems perceived by field workers, the area for key improvement with high importance and low performance was the automatic risk displacement measurement system.