• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.841-852
• /
• 2022

본 논문에서는 LCL 필터의 성능 검증을 위한 SPWM 제어기반의 3상 인버터 출력 파형 발생 장치를 개발하였다. 필터의 성능 검증을 위한 검사 신호를 얻기 위해 먼저, DSP 기반의 3상 SPWM 신호 생성 알고리즘을 개발하였으며, 동시에 3개의 하프 브리지 게이트 드라이버를 이용하여 SPWM 게이트 구동 신호들로부터 3상 SPWM 출력 파형을 발생시키기 위한 3상 전압형 인버터 회로를 설계하였다. 다음, 개발된 SPWM 기반 3상 인버터 출력 파형 장치의 검사 신호 발생 장치로서의 유효성을 검증하기 위해 하나의 LCL 필터가 실험, 제작되었으며, DSP 기반의 성능 검증 시스템이 실험적으로 구축되었다. 끝으로, 주어진 시비율을 가지는 출력 제어 실험에서 LCL 필터의 전 후의 3상 전압 파형을 비교함으로써 SPWM 기반 3상 인버터 출력파형 발생 장치의 유효성을 확인할 수 있었다.

• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.129-134
• /
• 2020

최근 태양전지 모듈 내부에 습기 침투 및 EVA Sheet의 배부름 현상, 프레임 Seal이 녹아내리는 현상, 설치 후 1년 지난 모듈에서 발전성능이 저하되는 현상 등이 발생하고 있다. 국내에 5~7년 이전에 설치된 태양전지 모듈에서 백화현상 및 전극 부식 현상, 절연파괴 현상 등이 나타나기 시작하여 발전성능 저하로 이어지고, 장기 신뢰성 및 장수명 기술에 대한 커다란 문제점이 대두되고 있다. 따라서 이러한 문제점들을 해결하기 위해 태양전지 모듈의 내구성 확보 및 노화 진행을 모니터링할 수 있는 기능을 포함하는 마이크로 인버터 (MiCrco Inverter Converter, 이하 MiC) 개발 및 MiC에서 모니터링 데이터를 기반으로 태양전지 모듈의 노화를 판단할 수 있는 스마트 모니터링 프로그램이 제시되고 있다. 또한, 태양전지 모듈의 모니터링 기능을 강화한 MiC와 IT 융합을 통한 체계적 운영 관리를 통한 고효율 태양광 스마트 감시 시스템이 되기 위해서는 MiC 내의 SoC (System On Chip)는 태양전지 모듈에 대한 환경정보를 복합적으로 감지하고 필요시 통신 및 제어를 수행할 수 있는 기능들이 요구되고 있다. 이러한 요구사항들을 기반으로 본 논문에서는 SoC 기반 보급형 MIC 스마트 태양광발전시스템 기술개발을 목적으로 연구하고자 한다.

• 전기학회논문지P
• /
• 제51권4호
• /
• pp.219-221
• /
• 2002

This paper presents an electric scooter development using blushless DC motor. In recent scooters was to develop for sport leisure and short transportation. Most of scooter are used petroleum gas. This gas scooter has disadvantage to pollute the air. Some of scooters have developed by DC motor which require a brush. However brushless motors have higher maximum speed and greater capacity, save maintenance labour and produce less noise. There is also greater freedom in planing the usage of brushless motors. In this paper we develop an electric scooter driving BLDC motor for design smart system and control speed of scooter with current reference signal to apply voltage to motor by means of three phase inverter. Using accelerator device we generate current reference to control speed and send the current to a MICOM by A/D converter. This MICOM produces the voltage signal and hall sensors signal and PWM controller drive three phase inverter to minimize error between the reference and an actual current.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.172-180
• /
• 2017

The repetitive control (RC) strategy is widely used in AC power systems because of its high performance in tracking period signal and suppressing steady-state error. However, the dynamic response of RC is determined by the fundamental period delay $T_0$ existing in the internal model. In the current study, a ($nk{\pm}i$)-order harmonic RC structure is proposed to improve dynamic performance. The proposed structure has less data memory and can improve the tracking speed by n/2 times. $T_0$ proves the effectiveness of the ($nk{\pm}i$)-order RC strategy. The simulation and experiments of ($6k{\pm}1$)-order and ($4k{\pm}1$)-order RC strategy used in the voltage source inverter is conducted in this study to control the harmonic current source, which shows the validity and advantages of the proposed structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1179-1181
• /
• 2001

For high performance induction motor drives such as mill drives, elevator, spindle drive, NC and so on, smart speed controls is usually required, that requires a precise current control. This paper is proposes design of fuzzy controller which makes use of the output voltage of the space vector PWM inverter. Also, proposes the performance fuzzy controller for high performance vector control of induction motor drive system. The performance of a fuzzy controller is compared with that of an PI controller in an internal loop. The validity of the proposed technique is confirmed by simulation results for induction motor drive system.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.511-521
• /
• 2014

This study proposes an electric vehicle (EV) smart panel board and its control method on the basis of charging scheduling. The proposed system consists of batteries, a three-phase battery charger, three single-phase inverters, transfer switches for electric power distribution, and a controller. The three-phase battery charger usually charges the batteries at midnight when electric rates are cheap and in light load. When the electric power consumption of the EV standard chargers connected to one phase of the power line is relatively large or when a blackout occurs, the electric power stored in the battery is supplied by discharging through the inverters to the EV standard chargers. As a result, the value of peak load and the charging electric power quantity supplied from a utility grid are reduced, and the current unbalance is improved. The usefulness of the proposed system is confirmed through simulations, experiments, and case studies.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1547-1553
• /
• 2017

Due to the high penetration ratio of dispersed generations, overvoltage problem of the feeder has become more an important issue in distribution system operation. This paper proposes a new method for the smart inverter to control reactive power to mitigate voltage rise by the reverse power flow from the DGs. The proposed method controls reactive power based on current measurement while conventional methods use voltage measurement which include unacceptably large errors. Various case studies using MATLAB simulation have been performed to verify effectiveness of proposed method.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.464-471
• /
• 2009

This paper introduces a new Motion-$SPM^{TM}$ (Smart Power Modules) module in Single In-line Package (SIP), which is a fully optimized intelligent integrated IGBT inverter module for up to 1kW low power motor drive applications. This module offers a sophisticated, integrated solution and tremendous design flexibility. It also takes advantage of pliability for the arrangement of heat-sink due to two types of lead forms. It comes to be realized by employing non-punch-through (NPT) IGBT with a fast recovery diode and highly integrated building block, which features built-in HVICs and a gate driver that offers more simplicity and compactness leading to reduced costs and high reliability of the entire system. This module also provides technical advantages such as the optimized cost effective thermal performances through IMS (Insulated Metal Substrate), the high latch immunity. This paper provides an overall description of the Motion-$SPM^{TM}$ in SIP as well as actual application issues such as electrical characteristics, thermal performance, circuit configurations and power ratings.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.229-234
• /
• 2008

The new millennium has started with several innovations driven by fast evolution of the technologies in energy sector. A strong impulse towards the diffusion of new economical efficient technologies regulatory incentives related to energy production from renewable source and a small scale building trigeneration and to promotion of more sustainable environmental-friendly generation solutions, the evolution of electricity markets, more and more binding local emission constraints, and the need for improving the security of supply to reduce the energy system vulnerability. The 24 percentage energy quantify of total energy consumption consumes in commercial buildings and residential houses and the 30% portion of total $CO_2$ emissions covers also in the commercial buildings and residential houses sector. To cope with efficiently this energy sinuation in building sector, Building microgrid or building tooling, heating & power(BCHP) system has been interested in recent day due to meeting thermal and electric energy requirements efficiently and with appropriate energy quality. A multi agent system is a collective of intelligent agents that communicate with each other and work cooperatively to achieve common goals. Also, it is to medicate and coordinate communication between Control Areas and Security Coordinators for teal-time control of the BCHP system and the power pid. In this new circumstance, it is very important to integrate the power and energy delivery system and the information system(communication, networks, and intelligent equipment) that controls it. Therefore, development of smart control modules with open communication protocol and seamlessly interchange the data and information between control network and data network including extranet and intranet give a great meanings. We designed and developed the TCP/IP-CAN IED agent modules and ModBus./LonTalk/(TCP/IP) IED agent ones to configure the multi-agent system based smart energy network of commercial buildings and also intelligent algorithms for inverter fault diagnostics which ran be operated in control level or agent level network.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.338-339
• /
• 2020

화력 발전에 의한 전력 생산은 환경오염으로 이어지고 이를 극복하기 위해 태양광 발전 혹은 풍력발전과 같은 신재생에너지원을 이용한 전력 생산이 꾸준히 증가하고 있다. 하지만 신재생에너지는 불규칙적인 전력을 생산할 뿐만 아니라 전력 계통의 도선 및 부하의 임피던스에 의해 계통의 전압 및 주파수가 변동한다. 이러한 문제를 극복하기 위해 계통 연계형 스마트 인버터를 사용하여 신재생에너지를 사용함과 동시에 계통의 안전성을 높일 수 있다. 본 논문은 ESS를 사용한 계통 연계형 스마트 인버터의 Voltage-Watt, Voltage-Var 제어 및 Frequency-Watt 제어를 통해 신재생에너지에 의해 발생하는 계통의 문제를 해결하는 제어 알고리즘을 제안한다.