• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.86-91
• /
• 2022

Cache bypassing is a scheme to prevent unnecessary cache blocks from occupying the capacity of the cache for avoiding cache contamination. This method is introduced to alleviate the problems of non-volatile memories (NVMs)-based memory system. However, the prior works have been studied without considering wear-out attack. Malicious writing to a small area in NVMs leads to the failure of the system due to the limited write endurance of NVMs. This paper proposes a novel scheme to prolong the lifetime with higher resistance for the wear-out attack. First, the memory reference pattern is found by modified reuse distance calculation for each cache block. If a cache block is determined as the target of the attack, it is forwarded to higher level cache or main memory without updating the NVM-based cache. The experimental results show that the write endurance is improved by 14% on average and 36% on maximum.

• Electronics and Telecommunications Trends
• /
• v.36 no.2
• /
• pp.12-21
• /
• 2021

Intelligent radar sensors are applied in many industries, such as the automobile, aerospace, and defense industries (for security and surveillance), and for traffic monitoring and management as well as environmental and weather monitoring. Furthermore, they are used in smart cities, homes, and buildings, wherein intelligent motion sensing is required in daily life. It is mentioned that it is being used. In addition, ETRI introduces a phased array-based intelligent radar for drone detection and a human name detection radar technology based on which humans can be detected in case of a disaster.

• Structural Engineering and Mechanics
• /
• v.90 no.6
• /
• pp.531-542
• /
• 2024

This study proposes a ground anchor using electromagnetic induction and utilizes an extended structure using hinges and links and mounting and sensing using electromagnets. The aim is to secure the anchor force, excluding grout, and to secure various sensing capabilities, including ground behavior. We propose a design based on the drilling diameter of 150 mm, and the materials used were STS304 and Aluminum 6061-T6. Computerized analysis was performed to confirm structural safety and functional implementation. The pull-out experiment was conducted by simulating the bedrock environment on a model earthwork as an experiment to check whether anchor force was generated by the insertion and tension of the anchor. The environmental pollution of grout, the difficulty of removing strands, and the inability to check whether the anchor is seated, which were pointed out as disadvantages of the existing ground anchor, were solved. Therefore, this study suggest that it can be effectively utilized as a secure and monitored anchoring solution in eco-friendly construction practices, including the installation of landslide prevention barriers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.221-228
• /
• 2014

In this paper, the operational concept and the navigation algorithms for the gliding guided artillery munition are studied. The gliding guided artillery munition has wings for gliding; therefore spin of the munition should be eliminated. The previous navigation algorithms assumed a spinning munition with constant angular velocity; hence, they cannot be applied for the gliding munition. Moreover, lateral stability becomes worse due to decrease of angular momentum. Therefore, side force should be controlled to improve the stability, and the munition should maneuver, then the previous navigation algorithms for typical fixed-wing aircraft cannot be applied. In this paper, we apply the previous navigation algorithms for the spinning munition. Spin is eliminated and wings are deployed based on the estimation results, and the advanced navigation algorithm for the non-spinning munition is introduced.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.229-236
• /
• 2014

In this paper, the guidance laws and controllers for the gliding guided artillery munition is studied. The gliding guided artillery munition has wings for gliding to increase a range; therefore previous guidance laws and controllers for the guided munition could not be applied. Concepts of vector field guidance and proportional navigation guidance are applied for mid-term and terminal guidance, respectively. The gliding guided artillery munition is operated within wide altitude and speed areas; therefore, the controllers are designed for each area, and gain-scheduling and the linear interpolation technique is applied to compute the appropriate gains.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.820-826
• /
• 2013

In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.14-20
• /
• 2019

Energy saving is becoming more and more important issue due to lack of resources and limited nature. However, There is a lack of learning status on energy saving in the school field. In particular, in elementary education on energy saving was not linked to practice, and the educational effect was insufficient. Although various kinds of learning tools are utilized, many successful cases of energy saving game strategy are introduced in overseas industry field, and game design is proposed so that energy related education can be played through games. Because energy conservation can not be effective without practice, learning using games as a tool is expected to be more effective than learning based on knowledge transfer in the classroom. We propose a defense game for energy conservation education by using the mission elements, score acquisition element, time limit element, and character element which are the interesting elements of the game designed in the previous research.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.27-42
• /
• 2022

In the era of the Fourth Industrial Revolution, digital transformation to increase the effectiveness of industry is becoming more important to achieving the goal of industrial innovation. The digital new deal and smart defense are required for digital transformation and utilize artificial intelligence, big data analysis technology, and the Internet of Things. These changes can innovate the industrial fields of national defense, society, and health with new intelligent services by continuously expanding cyberspace. As a result, work productivity, efficiency, convenience, and industrial safety will be strengthened. However, the threat of cyber-attack will also continue to increase due to expansion of the new domain of digital transformation. This paper presents the risk scenarios of cyber-attack threats in the Fourth Industrial Revolution. Further, we propose a preemptive intrusion response model to bolster the complex security environment of the future, which is one of the fundamental alternatives to solving problems relating to cyber-attack. The proposed model can be used as prior research on cyber security strategy and technology development for preemptive response to cyber threats in the future society.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.10-14
• /
• 2014

Laser aided Direct Metal Tooling(DMT) process is a kind of Additive Manufacturing processes (or 3D-Printing processes), which is developed for using various commercial steel powders such as P20, P21, SUS420, H13, D2 and other non-ferrous metal powders, aluminum alloys, titanium alloys, copper alloys and so on. The DMT process is a versatile process which can be applied to various fields like the mold industry, the medical industry, and the defense industry. Among of them, the application of DMT process to the mold industry is one of the most attractive and practical applications since the conformal cooling channel core of injection molds can be fabricated at the slightly expensive cost by using the hybrid fabrication method of DMT technology compared to the part fabricated with the machining technology. The main objectives of this study are to provide various characteristics of the parts made by DMT process compared to the same parts machined from bulk materials and prove the performance of the injection mold equipped with the conformal cooling channel core which is fabricated by the hybrid method of DMT process.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.255-261
• /
• 2014

The development of the IT industry brought major changes in modern society. That change applies in all areas, that life is more and more convenient. work is more efficient, handling quickly and that make convenient life. Interface is a big factor in the center of these changes. that is more and more development and there is currently using NUI technology. NUI technology is not necessary that discrete input device. and that use natural behavior like touch, gesture. among them, the smart phone device is a representative of appllying the NUI technology. smart phone as well as NUI technology applies kiosk, big table and that use Various fields, such as culture, defense, and advertising industries. In this research, development multi-touch table based multi-touch meeting system. and proposal efficient system possible improvements about Existing meeting system.