• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.100-105
• /
• 2016

The use of 3D scanners has increased gradually according to increasing 3D printer applications. The precision inspection of car parts or electronic components is an important issue not only in the field of mass production, but also in small-scale production. Recently, 3D scanner equipment efficiency and recognition technology has been improved continuously. On the other hand, the spraying time to prepare 3D scanning is time-consuming and has environmental problems. Therefore, an automatic spray system has been in demand by the manufacturing industry. Automatic spray equipment was newly developed for the preparation of a 3D scanner. In this research, the automatic spray system guarantees uniform spray operation. To determine the optimal spray parameters, various spraying methods, solutions and conditions were tested and compared with the experiments. The preparation time for 3D scanning was reduced to 1/10 compared to the manual spraying time, and indicates the optimal spraying conditions through a comparison of various spray coating conditions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.326-336
• /
• 2003

In order to modify the construction of gizzard shad coastal purse seine net with possible to the laborsaving of fishing operation in the coastal small fishing vessels, the model experiments were carried out on the model nets for several conventional nets using in the field and the experimental nets was manufactured as 1/100 and 1/60 of the full scale net. The results obtained are summarized as follows；1. In the case of the conventional net and reduction rate 75% in conventional net with purse line the fishing efficiency decreased, the lead line was upward for the surface and the pursing depth of pursing line was very shallow to 2∼3m. 2. In the case of the net having maximum depth in center part designed in this study, the length of float and lead line was 60% of conventional net, the depth of net was fixed 20m to selvage line of the both of the end and extend gradually with 50m, 40m, 30m to the center. Among the these net, depth of pursing line was 20∼23m for 50m and 7∼15m for 40m, 30m the depth of net. These results were suitable for interception of fish school in fishing ground, but several problems will be caused by the depth and current of fishing ground.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.258-268
• /
• 2001

The compression method is necessarily used to send the high quality moving picture that contains a number of data in image processing. In the field of moving picture compression method, the motion estimation algorithm is used to reduce the temporal redundancy. Block matching algorithm to be usually used is distinguished partial search algorithm with full search algorithm. Full search algorithm be used in this paper is the method to compare the reference block with entire block in the search window. It is very efficient and has simple data flow and control circuit. But the bigger the search window, the larger hardware size, because large computational operation is needed. In this paper, we design the full search block matching motion estimator. Using the DCT DC values, we decide luminance. And we apply 3 bit compare-selector using bit plane to I(Intra coded) picture, not using 8 bit luminance signals. Also it is suggested that use the same selective bit for the P(Predicted coded) and B(Bidirectional coded) picture. We compare based full search method with PSNR(Peak Signal to Noise Ratio) for C language modeling. Its condition is the reference block 8$\times$8, the search window 24$\times$24 and 352$\times$288 gray scale standard video images. The result has small difference that we cannot see. And we design the suggested motion estimator that hardware size is proved to reduce 38.3％ for structure I and 30.7％ for structure II. The memory is proved to reduce 31.3％ for structure I and II.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.97.2-97.2
• /
• 2012

The main payload of Science and Technology Satellite 3 (STSAT-3), Multipurpose InfraRed Imaging System (MIRIS) is the first Korean infrared space mission to explore the near-infrared sky with a small astronomical instrument developed by KASI. The 8-cm passively cooled telescope with a wide field of view (3.67 deg. ${\times}$ 3.67 deg.) will be operated in the wavelength range from 0.9 to $2{\mu}m$. It will carry out wide-band imaging and the Paschen-${\alpha}$ emission line survey. After the calibration of MIRIS in our laboratory, MIRIS has been delivered to SaTReC and successfully assembled into the STSAT-3. The main purposes of MIRIS are to perform the observation of Cosmic Infrared Background (CIB) at two wide spectral bands (I and H band) and to survey the Galactic plane at $1.88{\mu}m$ wavelength, the Paschen-${\alpha}$ emission line. CIB observation enables us to reveal the nature of degree-scale CIB fluctuation detected by the IRTS (Infrared Telescope in Space) mission and to measure the absolute CIB level. The MIRIS will continuously monitor the seasonal variation of the zodiacal light towards the both north and south ecliptic poles for the purpose of calibration as well as the effective removal of zodiacal light. The Pashen-${\alpha}$ emission line survey of Galactic plane helps us to understand the origin of Warm Ionized Medium (WIM) and to find the physical properties of interstellar turbulence related to star formation. Here, we also discuss the observation plan with MIRIS.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.543-551
• /
• 2006

Recently efforts to extract information about forests by using remote sensing techniques for efficient forest management have progressed actively. In terms of extraction of tree information using single remote sensing data, however, the accuracy of tree recognition and the quantity of extracted information is limited. The objective of this study is to carry out tree modeling in domestic environment applying the latest core technique for tree modeling using color aerial photographs and LiDAR data and to estimate the result of tree modeling. A small-scale coniferous forest was investigated in Daejeon. It was 0.77 that the $R^2$ of accuracy test of tree numbers that estimated with color aerial photography and LiDAR data. In terms of tree height, there was no difference between the estimated value and the field measurements in the case of the group accuracy test of the recently unchanged area. Moreover $R^2$ was 0.83 in the case of the individual accuracy test.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.389-397
• /
• 2018

Modern countries have almost ratified the UN Convention on the rights of persons with disabilities and are creating environments to prevent discrimination against these individuals. In 1996, the International Maritime Organization presented a recommendation for the design and operation of passenger ships to respond to elderly and disabled persons' needs. In Korea, an act on the promotion of transportation convenience for mobility disadvantaged persons has been implemented, and facilities for the disabled have been rapidly installed in ships, vehicles, aircraft, railways and passenger terminals. However, the maritime transport environment is less concerned about disabled persons than safety. In this study, basic research was conducted to improve the maritime transport environment for disabled people in Korea through a field survey and literature survey. As a result, it was found that relevant laws and regulations have not been properly applied to excursion ships and ferries as well as small-scale ports, which are responsible for a large part of coastal passenger transportation. In addition to low installation rates of facilities for the transportation of persons with disabilities in ships and terminals, loose equipment was also considered. Therefore, it is necessary to protect the human rights of persons with disabilities, which are universal values of humanity, by complementing laws and introducing improved facilities.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.199-206
• /
• 2003

Characteristics of the static shift are discussed by comparing the three-dimensional MT inversion with/without static shift parameterization. The galvanic distortion by small-scale shallow feature often leads severe distortion in inverted resistivity structures. The new inversion algorithm is applied to four numerical data sets contaminated by different amount of static shift. In real field data interpretations, we generally do not have any a-priori information about how much the data contains the static shift. In this study, we developed an algorithm for finding both Lagrangian multiplier for smoothness and the trade-off parameter for static shift, simultaneously in 3-D MT inversion. Applications of this inversion routine for the numerical data sets showed quite reasonable estimation of static shift parameters without any a-priori information. The inversion scheme is successfully applied to all the four data sets, even when the static shift does not obey the Gaussian distribution. Allowing the static shift parameters have non-zero degree of freedom to the inversion, we could get more accurate block resistivities as well as static shifts in the data. When inversion does not consider the static shift as inversion parameters (conventional MT inversion), the block resistivities on the surface are modified considerably to match possible static shift. The inhomogeneous blocks on the surface can generate the static shift at low frequencies. By those mechanisms, the conventional 3-D MT inversion can reconstruct the resistivity structures to some extent in the deeper parts even when moderate static shifts are in the data. As frequency increased, however, the galvanic distortion is not frequency independent any more, and thus the conventional inversion failed to fit the apparent resistivity and phase, especially when strong static shift is added. Even in such case, however, reasonable estimation of block resistivity as well as static shift parameters were obtained by 3-D MT inversion with static shift parameterization.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.147-161
• /
• 2021

Through photogrammetry techniques, what current researches can achieve at present is rough 3D mesh and color map of objects, rather than usable photo-realistic 3D assets. This research aims to propose a new method to create photo-realistic 3D assets that can be used in the field of visualization applications. The new method combines photogrammetry with computer graphics modeling. Through the description of the production process of three objects in the real world - "Bullet Box", "Gun" and "Metal Beverage Bottle," it introduces in details the concept, functions, operating skills and software packages used in the steps including the photograph object, white balance, reconstruction, cleanup reconstruction, retopology, UV unwrapping, projection, texture baking, De-Lighting and Create Material Maps. In order to increase the flexibility of the method, alternatives to the software packages are also recommended for each step. In this research, 3D assets are produced that are accurate in shape, correct in color, easy to render and can be physically interacted with dynamic lighting in texture. The new method can obtain more realistic visual effects at a faster speed. It does not require large-scale teams, expensive equipment and software packages, therefore it is suitable for small studios and independent artists and educational institutions.

• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.1-15
• /
• 2023

Expectations for wireless communication technology are rising as a base technology that promotes innovation in various industries in line with the paradigm of digital transformation in the 21st century beyond the stage of being used only for communication service itself. In this study, in order to compare 6G technological competitiveness between Korea and leading countries, technological competitiveness was confirmed through PFS, CPP, and network analysis based on GaN Integrated Circuit patent data. Korea's 6G technological competitiveness was 0.62 in PFS and 3.93 in CPP, which were 32.8% and 19.9%, respectively, compared to leading countries. In addition, as a result of network analysis, the collaboration rate in the 6G field was 7.2%, and the collaboration ecosystem was very insufficient in most countries. In contrast, it was confirmed that Korea, unlike leading countries, has established a small-scale collaboration ecosystem linked by industry and academia. Thus, it is necessary to establish a strategy for 6G communication technology at the national level so that communication technology can be advanced based on a relatively well-established collaborative ecosystem.

• Journal of the Korean earth science society
• /
• v.44 no.1
• /
• pp.62-78
• /
• 2023

The purpose of this study is to analyze the field of Earth science at a science fair. For this purpose, 566 pieces of data spanning 21 years (2000 to 2020), acquired from entries in the Earth Science section on the science fair website, were analyzed using the semantic network method. As a result, geoscience topics have been actively explored in works submitted for the Earth Science section of the science fair. Fossils from the Cretaceous period of the Mesozoic Era were particularly predominant. Together with these, keywords corresponding to astronomy, space science, and atmospheric science formed a small-scale network. Astronomy and space science mainly dealt with the dynamic characteristics of asteroids, Venus, and Jupiter. Other subjects included the solar system, sunspots, and lunar phases. Atmospheric science has focused on atmospheric physics, atmospheric observation and analysis technology, atmospheric dynamics, air quality monitoring, while marine science has been limited to physical oceanography and geologic oceanography. This study, is expected to help select Earth Science topics and conduct inquiry activities in schools.