• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.120-125
• /
• 2005

Effect of transverse electric fields on fracture behavior in ferroelectric ceramics under purely electrical loading is investigated. It is shown that the shape and size of the domain switching zone depend strongly on the ratio of the transverse electric field to the coercive electric field as well as the direction of the applied electric field. Under small-scale conditions, the crack-tip mode I and II stress intensity factors induced by ferroelectric domain switching are numerically obtained. The crack kinking in ferroelectric ceramics is also discussed.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.32-41
• /
• 2009

In this study, scale-down design of full-scale Korean Utility Helicopter (KUH) main rotor blade has been investigated. The scaled model system were designed for the measurement of aerodynamic performance, tip vortex and noise source. For the purpose of considering the same aerodynamic loads, the Mach-scale method has been applied. The Mach-scaled model has the same tip Mach number, and it also has the same normalized frequencies. That is, the Mach-scaled model is analogous to full-scale model in the view point of aerodynamics and structural dynamics. Aerodynamic scale-down process could be completed just by adjusting scaling dimensions and increasing rotating speed. In the field of structural dynamics, design process could be finished by confirming the rotating frequencies of the designed blade with the stiffness and inertial properties distributions produced by sectional design. In this study, small-scaled blade sectional design were performed by applying domestic composite prepregs and structural dynamic characteristics of designed model has been investigated.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.6
• /
• pp.571-581
• /
• 2015

Soil moisture content is generally accepted as an important factor to understand the process of crop growth and is the basis of earth system models for analysis and prediction of the crop condition. To continuously monitor soil moisture changes at kilometer scale, it is demanded to create high resolution data from the current, several tens of kilometers. In this paper we described a downscaling method for Advanced Microwave Scanning Radiometer 2 (AMSR2) Soil Moisture Content (SMC) from 10 km to 30 m resolution using a soil texture and field measurements that have a high correlation with the SMC. As a result, the soil moisture variations of both data (before and after downscaling) were identical, and the Root Mean Square Error (RMSE) of SMC exhibited the low values. Also, time series analyses showed that three kinds of SMC data (field measurement, original AMSR2, and downscaled AMSR2) had very similar temporal variations. Our method can be applied to downscaling of other soil variables and can contribute to monitoring small-scale changes of soil moisture by providing high resolution data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.573-582
• /
• 1994

Blast vibration equations proposed previously are investigated. Special attention is given to the blast vibration equation which shows the best fitting to the geologic condition of Korea. The fittness of proposed blast vibration equation is analyzed and examined using many field data measured in Korea. The prediction of blast vibration equation using field data was performed by linear regression analysis. Moreover, after the prediction of each blast vibration equation, vibration velocity is recalculated on the basis of scaled distance at each equation. Reliability of regressioned blast vibration equation is observed by comparing predicted and measured velocity, which is divided into small-scale blasting of city and large-scale blasting of quarry. Based on this study, the best fitting equation to the Korean geologic condition is ROOT SCALING & CUBE ROOT SCALING proposed by USBM(United Nations Bureau of Mines). Also representative blast vibration equations depending on the different kinds of rock mass are proposed using measured and existing field data.

• Advances in nano research
• /
• v.6 no.2
• /
• pp.147-162
• /
• 2018

A new nonlocal higher order shear deformation theory (HSDT) is developed for buckling properties of single graphene sheet. The proposed nonlocal HSDT contains a new displacement field which incorporates undetermined integral terms and contains only two variables. The length scale parameter is considered in the present formulation by employing the nonlocal differential constitutive relations of Eringen. Closed-form solutions for critical buckling forces of the graphene sheets are obtained. Nonlocal elasticity theories are used to bring out the small scale influence on the critical buckling force of graphene sheets. Influences of length scale parameter, length, thickness of the graphene sheets and shear deformation on the critical buckling force have been examined.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.43.2-43.2
• /
• 2010

We reconstruct the large-scale initial density field from the distribution of galaxies observed by the Sloan Digital Sky Survey (SDSS). After adding the small-scale fluctuations to match the power spectrum to that of the standard LCDM model, we make a cosmological N-body simulation of formation of structures from the initial conditions. Properties of the objects formed in the simulation can be statistically compared with those of the observed SDSS galaxies. The simulation makes it possible to know the past history of evolution of objects located in different environments, and also gives us information on the environmental parameters that cannot be directly obtained observationally. It is hoped that this comparative study leads us to better understanding of formation and evolution of galaxies in conjunction with large-scale structures in the universe.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3207-3216
• /
• 2021

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.19-21
• /
• 1996

We apply topological measures of clustering such as percolation and genus curves (PC & GC) and shape statistics to a set of scale free N-body simulations of large scale structure. Both genus and percolation curves evolve with time reflecting growth of non-Gaussianity in the N-body density field. The amplitude of the genus curve decreases with epoch due to non-linear mode coupling, the decrease being more noticeable for spectra with small scale power. Plotted against the filling factor GC shows very little evolution - a surprising result, since the percolation curve shows significant evolution for the same data. Our results indicate that both PC and GC could be used to discriminate between rival models of structure formation and the analysis of CMB maps. Using shape sensitive statistics we find that there is a strong tendency for objects in our simulations to be filament-like, the degree of filamentarity increasing with epoch.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.681-698
• /
• 2016

With increasing public concern for environmentally friendly agriculture, ecological aspect of landscape management is of growing importance. AHP (Analytical Hierarchy Process) analysis were conducted based on the delphi survey of 31 experts to evaluate the relative importance and the preference of landscape elements. Landscape components of organic farmland were classified into 2 landscape fields, 5 landscape types, 14 landscape units, and 37 landscape elements. Overall relevance score for the proposed landscape components were about 5.5 on the seven point scale. While the relative importance weight of cropland landscape field was 0.71, the weight of intra-structure landscape field was 0.29. Among the cropland landscape, relatively higher weight was assigned to farming system (0.47) and margins (0.31), as compared with hydrological system (0.22). In the farming system, crop (0.40) and farm land (0.39) were the most important landscape units. In the margins, higher weight was given to Buffer zone (0.44) and Trees (0.42). Biological habitat (0.43) ranked the highest score in the hydrological system. Preferable landscape elements were glass house, companion plants, rice paddy field, diverse crop species, small pond, and small river, which are representing ecological advantage of organic farming systems. This result indicated that the landscape elements identified in the study would be suitable to evaluate ecological aspect of rural landscape in organic farmland.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.309-313
• /
• 2015

If the present universe is slightly open then pre-inflation curvature would appear as a cosmic dark-flow component of the CMB dipole moment. We summarize current cosmological constraints on this cosmic dark flow and analyze the possible constraints on parameters characterizing the pre-inflating universe in an inflation model with a present-day very slightly open ${\Lambda}CDM$ cosmology. We employ an analytic model to show that for a broad class of inflation-generating effective potentials, the simple requirement that the observed dipole moment represents the pre-inflation curvature as it enters the horizon allows one to set upper and lower limits on the magnitude and wavelength scale of pre-inflation fluctuations in the inflaton field and the curvature parameter of the pre-inflation universe, as a function of the fraction of the total initial energy density in the inflaton field. We estimate that if the current CMB dipole is a universal dark flow (or if it is near the upper limit set by the Planck Collaboration) then the present constraints on ${\Lambda}CDM$ cosmological parameters imply rather small curvature ${\Omega}_k{\sim}0.1$ for the pre-inflating universe for a broad range of the fraction of the total energy in the inflaton field at the onset of inflation. Such small pre-inflation curvature might be indicative of open-inflation models in which there are two epochs of inflation.