• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.69-75
• /
• 2001

Systems engineering has been utilized in system development primarily for large-scale projects or commercial large-scale systems during the last several decades. We can understand why it would be useful to apply systems engineering to the development of a relatively small system. However, it is difficult to effectively carry out a project due to the complexity in applying the methods of systems engineering. To apply systems engineering to the development of a small system, the system engineering processes should be tailored. We established a requirements driven system design process(RDSDP) that can effectively carry out the system design far a small system. RDSDP is a system design process that treats all the requirements thoroughly and effectively. This is applied by the designer according to a standardized and systematized process during the first phase in design, in which system specifications are made. By using RDSDP, we can affect a reduction of the number of redesign phases in the process of the system design, shorten the period for to make specification, which will then cause the system to succeed in the actual application.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.47-57
• /
• 1999

The small-scale models have been utilized for the prediction of inelastic behavior of reinforced concrete structures for several decades. The parameters that affect the similitude between the model and prototype are various. Among them, the effect of bond between the model reinforcement and the model concrete is one of the most important factors. The study reported herein is addressed to verifying this similitude in bond behavior. The simple beams which have the lap splice at the midspan were made and flexural tests were performed under two-point loading. The length of lap splice are varied from 0.4ld through 0.7ld and up to 1.0ld where ld is the development length of the reinforcement. The selected scales are 1/1, 1/5, 1/10 and 1/12. Two prototype specimens and three models were tested in addition to the associated material tests and the test results are compared from the viewpoint of similitude.

• 웰빙융합연구
• /
• 제6권3호
• /
• pp.13-18
• /
• 2023

Purpose: The small-scale environmental impact assessment has been in operation since its implementation in August 2000, and is a system that meets the purpose of sustainable development in consideration of the environment in areas requiring conservation. However, when preparing a small environmental impact assessment report, the contents of the reduction measures are too qualitative, or reports are prepared to simply list the compliance stipulated by individual laws, and the contents of consultations prepared by consultative agencies and review agencies are not much different. In addition, the direction of consultation on development projects for similar locations of the same project type is frequently changed by reflecting the subjective judgment of the consultative officer of the Ministry of Environment (Environment Agency). Therefore, this study attempted to improve the establishment of measures to reduce the existing simple listing of qualitative contents and the inconsistent presentation of review opinions by consultative agencies and review agencies. Research design, data and methodology: The research method extracted absolute evaluation items and relative evaluation items among small environmental impact assessment items, analyzed and presented detailed items, and prepared a distribution table for each section according to the details of the relative evaluation items, and presented them as a table. Results: This study was conducted to derive uniform results with objective indicators in the preparation and consultation process of a small-scale environmental impact assessment. Conclusions: Once a quantitative evaluation is established, the consultant can objectively determine and process the environmental impact.

• 콘크리트학회지
• /
• 제3권4호
• /
• pp.133-142
• /
• 1991

원형(prototype) 철근콘크리트 구조물의 거동을 축소모형실험을 이용하여 연구하기 위해서는 모든 구성재료의 물리적 성질들이 특정상사(similitude)관계 또는 1:1로 복제된 모형재료를 사용하여야 한다. 원형과 모형의 물리적 특성에 관한 상사성에 대해 사전 연구가 되어져야만 축소모형실험결과 해석에 적용할 수 있다. 본 연구는 철근콘크리트 구조물을 축소모형화하는데 따른 구성재료의 물리적 성질과 기본 거동에 관한 문제점들을 파악하고, 개선된 방법을 찾기 위한 것이다. 모형콘크리트에서 발견되는 큰 인장강도를 최소화하기 위해 배합비를 변화시켜서 원형콘크리트에 가장 가까운 모형콘크리트의 제작기법과 모형철근의 표면형태에 따른 거동의 차이를 단순보를 이용하여 연구하였다.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.337-348
• /
• 2020

Experimental testing has been considered as one of the most straightforward approaches to realize the structural behavior for earthquake engineering studies. Recently, novel and advanced experimental techniques, which combine numerical simulation with experimental testing, have been developed and applied to structural testing practically. However, researchers have to take the risk of damaging specimens or facilities during the process of developing and validating new experimental methods. In view of this, a small-scale structural laboratory has been designed and constructed in order to verify the effectiveness of newly developed experimental technique before it is applied to large-scale testing for safety concerns in this paper. Two orthogonal steel reaction walls and one steel T-slotted reaction floor are designed and analyzed. Accordingly, a large variety of experimental setups can be completed by installing servo-hydraulic actuators and fixtures depending on different research purposes. Meanwhile, a state-of-the-art digital controller and multiple real-time computation machines are allocated. The integration of hardware and software interfaces provides the feasibility and flexibility of developing novel experimental methods that used to be difficult to complete in conventional structural laboratories. A simple experimental demonstration is presented which utilizes part of the hardware and software in the small-scale structural laboratory. Finally, experimental layouts of future potential development and application are addressed and discussed, providing the practitioners with valuable reference for experimental earthquake engineering.

• 한국유기농업학회지
• /
• 제18권2호
• /
• pp.155-176
• /
• 2010

This study was conducted to research the status, history and prospects of farm scale milk processing and to develop a management strategy for small scale milk process plant in Korea. Also it aims to provide ways to apply it so as to vitalize the farm made milk products market practically. This study was also treats the practical development of dairy farm school programs through the farm scale milk processing. Farm-scale milk plant (FMP) should be some of the ideas to develop small scale and using the resources according to the local features, limited expanding in regional market, produce by consumers order amounts, management policy will be transferred organic dairy farm. A few policy suggestions to put FMP system of financial support would not from beginner, it is better to settled FMP system by government or co-operation group in practical support programs were proposed. What the state needs to do through direct involvement were to put efforts at demand expansion on FMP system products, to certificate and safety the farm made milk products marketing system settings, to build more variation chance of the milk products. What was more important, however, was support policy, to create the network of FMP market and to develop of training program contents for each FMP operation unit. The ideal FMP model for the development of Dairy Farming proposed in this research will be applied as a relevant reference in managing and realizing environmental friendly and sustainable dairy industry at the national level.

• International Journal of Aerospace System Engineering
• /
• 제10권2호
• /
• pp.1-4
• /
• 2023

Even though the recent development trend of wind turbine systems has been focused on larger MW Classes, the small-scale wind turbine system has been continuously developed because it has some advantages due to easy personnel establishment and use with low cost and energy saving effect. This work is to propose a specific structural design and analysis procedure for development of a low noise 500W class small wind turbine system which will be applicable to relatively low wind speed region like Korea. The proposed structural feature has a skin-spar-foam sandwich composite structure with the E-glass/Epoxy face sheets and the Urethane foam core for lightness, structural stability, low manufacturing cost and easy manufacturing process. Moreover this type of structure has good behaviors for reduction of vibration and noise. Structural analysis including load cases, stress, deformation, buckling and vibration was performed using the Finite Element Method. In order to evaluate the designed blade structure the structural tests were done, and their test results were compared with the estimated results.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.47-57
• /
• 2009

Computing environments are being more and more various due to the development of technologies. While existing computing environments used for fixed locations or particular purposes by requesting big scale monitors or complicate calculation performance, recent computing environments are used for a variety of locations and for a diversity of purposes by using various devices. Because of the needs, digital device convergence, which emphases portability and mobility, came out. However, almost researches for user interface are performed for big scale monitors or complicate calculation performance until now. By the reason, user interface on each small device is different from others, or is not appropriate for the purpose of small device. Therefore, this research is to design Zoomable User Interface (ZUI) that adapts for small devices by adding the existing user interface on small devices and haptic technologies, and to implement a user interface for PDA devices.

• 한국자원공학회지
• /
• 제55권6호
• /
• pp.624-634
• /
• 2018

인도네시아는 신규 유전 발견이 줄어들고 원유 순수입국으로 전환됨에 따라 석유 생산을 늘리고자 공동개발계약(Kerja Sama Operasi, KSO)을 통해 소규모 광구 개발을 위한 국내 투자 유치 활성화에 노력하고 있다. 하지만 KSO는 계약자 고위험 저수익의 계약형태이며, 계약자가 석유개발에 대한 모든 비용을 지불하기에 사업 타당성 판단을 위한 경제성 평가가 필수적이다. 이 연구에서는 KSO 계약 조건을 적용하여 인도네시아 소규모 광구 개발에 대한 경제성 평가를 수행하였으며, 민감도 분석을 통해 경제성 평가 시 주요 변수를 파악하였다. 그 결과 유가, CAPEX, OPEX가 경제성 평가에 영향을 미치는 것으로 나타났으며, 소규모 광구에서 상업적인 생산은 다소 어려운 것으로 판단되었다. 향후 이 연구는 국내 기업이 인도네시아 자원개발 투자 시 참고 자료로 활용할 수 있을 것이다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.357-364
• /
• 2003

National Geography Institute(NGI, National mapping agency) has been producing national basemap in automated process since middle of 1980's toward the systematic and efficient management of national land. In 1995, Korean government initiated a full-scale implementation of the National Geographic Information System(NGIS) Development Plan. Under the NGIS Development Plan, NGI began to produce digital maps in the scales of 1:1,000, 1:5,000, 1:25,000. However, digital maps of 1:250,000 or less scale, which are currently used for national land planning, were not included in NGIS Development Plan. Also, the existing laws and specifications related to digital maps of 1:250,000 or less scale are not clearly defined. Therefore this study proposed a feature classification system, which defines features that should be represented in digital map of 1:250,000 or less scale.