• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.135-137
• /
• 2014

The expansion of the transportation card, and the popularity of smart phones has been increasing social concern about the NFC technology. Has been focused on the use of e-commerce, most of the NFC, fulfilling the security problems or technical topic for this, but the reality is that the current debate on the new value added contents industry and a nonexistent connection. Leverage NFC for efficient order management system in order to build lunch or dinner by being pushed to ease restrictions on remodeling and renovation projects Food Truck vehicle through a small business support programs in the current government, but increasing interest in the Food Truck I study a model of ordering system for food truch 재소 s-guide system. A lot of the effectiveness of management as appropriate to the use of NFC for small business that operates as a server system is highly Food Truck tendencies tied to one router and server on the intranet without the need of internet connection system. I believe in this study S-Guide system contributes for business success for food truck of small business.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.136-146
• /
• 2013

Truck demand analysis based on TCS data has limitation in that TCS data can not provide truck O/D data for each type of truck vehicle. This study conducted video survey for classifying truck vehicle types. By using TCS data and vehicle ratio by region/cities type, truck O/D data on expressway were estimated. It was found that average travel distances of small truck, medium truck and large truck were 52km/veh, 56km/veh and 97km/veh, respectively by analysing truck O/D data estimated in this study. The reliability analysis showed that check points where error rate is lower than 30% comprise of 87.3%. It is considered that estimated O/D data by truck vehicle types would be useful for the analysis of truck demand of expressway.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.224-241
• /
• 2021

According to data from the National Police Agency, 75.5 percent of dead traffic accidents in Korea are truck accidents. About 1,000 people die in cargo truck accidents in Korea every year, and two to three people die in cargo truck accidents every day. In the survey, Korean cargo workers answer poor working conditions as an important cause of constant truck accidents. COVID 19 is increasing demand for non-face-to-face logistics. The inefficiency of the Korean transportation system is leading to excessive work burden for small logistics The inefficiency of the Korean transportation system is causing excessive work burden for small individual carriers. The inefficiency of the Korean transportation system is also evidenced by the number of deaths from logistics industry disasters that have risen sharply since 2020. Small and medium-sized Korean Enterprises located in CIPs (Connected Industrial Parks) often do not have smart access certification systems. And as a result, a lot of transportation time is wasted at the final destination stage. In the logistics industry, time is the cost and time is the revenue. The logistics industry is the representative industry in which time becomes money. The smart access authentication system architecture proposed in this paper allows small logistics private carriers to improve legal stability, and SMEs (Small and Medium-sized Enterprises) in CIPs to reduce logistics transit time. The CIPs smart access system proposed in this paper utilizes the currently active Mobile OTP (One Time Password), which can significantly reduce system design costs, significantly reduce the data capacity burden on individual cell phone terminals, and improve the response speed of individual cell phone terminals. It is also compatible with the OTP system, which was previously used in various ways, and the system reliability through the long period of use of the OTP system is also high. User customers can understand OTP access systems more easily than other smart access systems.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.231-234
• /
• 2004

This paper is to research about design and drive system of a switched reluctance motor for a pallet truck application. SRM is suitable for a pulse type source and is researched for home and industrial applications owing to the advance of power electronics technology. An SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. The small size, robustness and high efficiency make it possible to replace with DC motor which is used in a pallet truck conventionally. Test results show that pallet truck with SRM has better drive characteristics than that of the DC motor.

• Korean Journal of Occupational Health Nursing
• /
• v.29 no.2
• /
• pp.106-113
• /
• 2020

Purpose: This study aimed to analyze industrial accident compensation insurance coverage and industrial accidents among concrete mixer truck drivers. Methods: Original data on industrial accidents from 2012 to 2017 were analyzed through descriptive statistics. Results: Industrial accident compensation insurance coverage was 44.6% in 2017. Most concrete mixer truck drivers were affiliated with small businesses. A total of 61 industrial accidents occurred in 2012, 65 in 2014, and 80 in 2017. The major types of industrial accident were falls, slips, and crushes. Conclusion: Because concrete mixer truck drivers are at high risk for industrial accidents, industrial accident compensation insurance coverage and industrial accident prevention should be strongly enforced.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.120-127
• /
• 2008

A military vehicle undergoes normal to extreme driving conditions, which consequently induce the fatigue and fracture of cabin and frame. So, it is important to estimate the fatigue life of two components at an initial design stage. In this paper, Modal Superposition Method(MSM) was applied to evaluate the durability performance of a small-sized military truck. For reliable durability analysis, a Virtual Test Lab(VTL) Model was established by correlation with experimental results. These data were extracted from actual driving test, modal test, and SPMD(Suspension Parameter Measuring Device) test. This process shows that Virtual Fatigue Analysis can be a useful approach in the development of military vehicles as well as commercial vehicles.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.732-734
• /
• 2000

An 1.2[kw] SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. and has to have the characteristics of DC series motor. The small size, ruggedness, high efficiency make it possible to replace with DC motor. Test results show that pallet truck with SRM has better characteristics than that of the DC motor performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.3
• /
• pp.379-386
• /
• 2008

The 36 liter LNG tank is designed to fit in the limited installation space of a small truck. Two LNG tanks allow one ton truck to run about 432 km per fueling. which is about 1.8 times longer than CNG mileage for the same truck. The variation of BOG with car acceleration for the different fuel liquid/vapor ratios in a tank is analysed by the modified Fortran program "Pro-Heatleak". Computational analyses show that the relationship between the BOG and liquid/vapor ratio is linearly proportional at a given acceleration. Fuel consumption decreases the volume of liquid fuel in the tank but increases the specific BOG. BOG increases with increasing of car acceleration when fuel liquid/vapor ratio is greater than 0.5 and decreases with increasing of car acceleration when fuel liquid/vapor ratio is less than 0.5. The difference between maximum and minimum BOG for full tank is about 12 percents. For the fuel liquid/vapor ratio equal to 0.5 BOG does not depend on car acceleration.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.25-29
• /
• 2004

This paper is to research about design and drive system of a switched reluctance motor for a pallet truck application. SRM is suitable for a pulse type source and is researched for home and industrial applications owing to the advance of power electronics technology. An SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. The small size, robustness and high efficiency make it possible to replace with DC motor which is used in a pallet truck conventionally. Test results show that pallet truck with SRM has better drive characteristics than that of the DC motor performance.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.155-159
• /
• 2020

In this study, the structural analyses were performed on the number of leaf springs in large truck. The deformations were small for all four models. The maximum stress of model A was found to be the largest, and that of model D was the smallest. Model A was seen about 1.87 times larger than model D and about 1.52 times larger than model B. The maximum stresses of models C and D were seen to be less. In terms of the effect to reinforce one more overlapping spring, The effect of the enhancement of the strength of model D was shown to be small by comparing with model C. Therefore, model C with three overlapping springs is thought to be efficient in design and good in strength. The structural strength of leaf spring can be evaluated by applying this study result to the leaf spring at large truck. And it is seen that the result can be the design of the leaf spring with durability at large truck and the aesthetic convergence.