• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.53-60
• /
• 2010

Texts and icons are used to deliver the safety and health information on pesticide labels. This study surveyed the standards or guidelines regarding the presentation formats of texts and icons used in pesticides. Also, the text and icon formats being used in the 50 pesticide products in Korea were investigated in the aspects of size, font (texts only), color. From the guideline survey, it was found that while the guidelines for the text fonts and colors in pesticides were suggested, there was no detailed guidelines about the text size. For the icon presentation, it was regulated that the icon size for the pesticides should be larger than $7mm{\times}7mm$, and this size was equivalent to the size when the reading distance of 28 ㎝ was applied to other two guidelines. From the sample survey of the 50 pesticides, it was found that the small text size being used in the 50 pesticides was 1mm (3pt), and this size was considered to be very difficult to be read, particularly by old people. The minimum size of the texts for the toxicity of the pesticide, the very important safety information, was found to be 1.5 mm, which is considered to be very uncomfortable to be read. The size of icons were varied from 2 to 12 mm, and the total average size was 4.6 mm. The 149 icons from a total 187 icons (80%) were smaller than the icon presentation guideline ($7mm{\times}7mm$), and the reason for the small icon size might be the small area of the label of the pesticides. Thus, more detailed guidelines for the text size and more practical guidelines for the size of icons are required.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1205-1214
• /
• 2005

This study was carried out to investigate the emission characteristics of volatile metals(Hg, As, Se) and semi volatile metals such as Pb from small and medium size municipal solid waste incinerators(MSWIs). The concentrations of Hg, Pb, As and Se in emission gas from small size waste incinerators were higher than those of medium size waste incinerators. This is probably due to less air pollutant control devices and high emission gas temperature of the small size waste incinerators relative to the medium size waste incinerators. Emission gas temperature from small and medium size waste incinerators were divided into 2 groups. The first group was about $100^{\circ}C$ and the second roup in the range of $400{\sim}700^{\circ}C$. The concentrations of emission gas at the second group were Hg $70.43\;{\mu}g/Sm^3$, Pb $0.94\;{\mu}g/Sm^3$, As $9.83\;{\mu}g/Sm^3$ and Se $5.05\;{\mu}g/Sm^3$. The concentrations of Hg, Pb, As and Se at the first group were lower than those found at the second group. Besides, the removal efficiencies of Hg in medium size waste incinerators were $55.2{\sim}95.9%$. Emission gas temperature reduction from waste heat boiler(WHB) contribute to control of Hg. Based on above results, we postulate that the temperature of flue gas should play a very important role in volatile metal control in small and medium size MSWIs. In order to improve the volatile metals removal efficiency, the temperature of cooling system must be controlled and the air pollution control device should be operated properly.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.11 no.2
• /
• pp.47-51
• /
• 2006

• KCID journal
• /
• v.10 no.1
• /
• pp.80-88
• /
• 2003

The pumping efficiency of small size tube wells was investigated in the rural area. The pumping characteristic curve is constructed to estimate the pumping rate of small size tube wells for irrigation. The pumping rates from the characteristic curve highl

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.475-476
• /
• 2010

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.975-977
• /
• 2004

According to thin and light form-factor and additional function of today's electronic devices, it is required to decrease the pattern pitch of FPC. The high density demand is more and more important trend especially, for small size LCD module. Based on this requirement, the manufacturing process is advancing from subtractive method to super subtractive method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.2 s.30
• /
• pp.109-116
• /
• 1989

Korean clothings are admired for their beauty and traditional value. On the other hand, many of Korean women complain of chest restriction. Korean skirts may give high garment pressure to the wearers because the Korean skirt-band do not resolve physical tensions in size or in stretch. This paper aims at the identification of the garment pressure caused by the Korean skirt-band and the cardiopulmonary change caused by garment pressure. The Korean skirt-band were made in 3 kinds of size, and 21 women were selected for wearing test. The garment pressure was measured in front, side, and back parts of the body. The measured cardiopulmonary parameters were vital capacity, respiratory rate, heart rate, and blood pressure. The results were as follows: 1. The smaller the size of the Korean skirt-band, the greater the garment pressure. The pressure during inspiration was significantly greater than the pressure during expiration. 2. The pressure in side part was the greatest of the three measurements and the pressure in back part was the smallest. 3. The small size of the Korean skirt-band revealed low vital capcity and great respiratory rate. 4. As the small size grement was dressed, the respiratory rate and the heart rate during walking and rest after walking were significantly high. 5. Subjects felt uncomfortable when they wore small sized garment.

• Structural Engineering and Mechanics
• /
• v.31 no.6
• /
• pp.697-716
• /
• 2009

This paper summarizes an experimental and analytical study on the seismic behavior of high strength reinforced concrete columns under cyclic loading. In total six cantilever columns with different sizes and concrete compressive strengths were tested. Three columns, small size, had a $325{\times}325$ mm cross section and the three other columns, medium size, were $520{\times}520$ mm. Concrete compressive strength was 80, 130 and 180 MPa. All specimens were designed in accordance with the Japanese design guidelines. The tests demonstrated that, for specimens made of 180 MPa concrete compressive strength, spalling of cover concrete was very brittle followed by a significant decrease in strength. Curvature was much important for the small size than for the medium size columns. Concrete compressive strength had no effect on the curvature distribution for a drift varying between -2% and +2%. However, it had an effect on the drift corresponding to the peak moment and on the equivalent viscous damping variation. Simple equations are proposed for 1) evaluating the concrete Young's modulus for high strength concrete and for 2) evaluating the moment-drift envelope curves for the medium size columns knowing that of the small size columns. Experimental moment-drift and axial strain-drift histories were well predicted using a fiber model developed by the authors.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.2
• /
• pp.27-32
• /
• 1977

The paper deals the fishing condition of the stern trawlers operated in the Atlantic coast of Africa. The datas are gathered from the Korean stern trawlers operated in the area from June, 1975 to May, 1976. The obtained results are summarized as follows: 1. The mean catch per haul are calculated as, cuttle fish 14.5kg, large size squid(more than :lOOg of body weight) 28.2kg, small size squid(less than 300g) 36.4kg, octopus 47.0kg. 2. Small size cuttle fish(less than5OOg of body weight) are caught much during after spring tide in July to September, yet, large size ClIttle fish(more than 500g) are caught much during neap tide in October to January. 3. Small size squid(less than 300g of body weight) are cBught much during after spring tide in October to December, yet, large size squid(more than 3OOg) are caught much during before spring tide in October to March. 4. Octopus are caught during neap tide in July to August.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.360-371
• /
• 2013

Fast delivery of construction projects provides more value to project owners. Batch production, which is production not in single pieces, but in batches, is a common approach in repetitive construction projects such as multi-unit residential building construction projects. In batch production, the use of a small batch size allows the early start of subsequent activities, and thus can lead to early completion of projects. In addition to batch size, balance between productivities in construction activities can affect project duration. However, the impact of the balance between productivities with regard to their order on project duration has not been studied. The main goal of this study is to test a hypothesis, which is that the order of construction activities' unbalanced productivities affects the amount of time reduction that can be achieved by using a small batch size. A computer-based simulation model was developed, and five different cases were simulated to test the hypothesis. The conclusion of the simulation result is that the order of productivities does not affect the time reduction achieved by using a small batch size. It is expected that the findings of this study can help general contractors make decisions in terms of batch size.