• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.281-286
• /
• 2022

In this study, the effects of Elasto-hydrodynamic lubrication pressure on the critical shoulder height of raceway in an angular contact ball bearing were investigated. Both 3D contact analyses using an influence function and the EHL analysis were conducted for the contact geometry between the ball and raceways. The pressure distributions by 3D contact analysis and EHL analysis for an example bearing were compared. The effect of ellipse truncation on the minimum film thickness also investigated from EHL analysis. The critical shoulder height in the dry contact and the EHL state were compared for various applied loads. It is shown that when the ellipse truncation occurs, the pressure spike for the EHL conjunction is higher than that for the dry contact, and its location moves more inward of the contact center. The steep pressure gradients would increase the flow rate, so in order to maintain flow continuity a significant reduction in film thickness and an abrupt rise in pressure occurs in the edge of shoulder. Significant reduction of the minimum film thickness occurs near the edge of shoulder. The critical shoulder heights in the EHL state are calculated as higher values compared with in the dry contact. This results shows that the determination of critical shoulder height by the EHL analysis is more proper.

• International Journal of Korean Welding Society
• /
• v.2 no.2
• /
• pp.7-13
• /
• 2002

A comparison of the welding performance of ship hull structural steels has been made. The weldability of steels especially designed for laser processing was compared to that of conventional hull and structural steels with plate thicknesses up to 12 mm. Autogenous laser beam welding was used to weld butt joints as well as skid and stake welded T-joints. The welds were assessed in accordance with the document "The Classification Societies" Requirements for Approval of $CO_2$ Laser Welding Procedures" Small imperfections in the weld only grew slightly in root bend tests and they only had a minor influence on the fatigue properties of laser fillet welded joints. In Charpy impact tests, the 27 J transition temperature of the weld metal and HAZ ranged from below -60 to $-50^{\circ}C$. The amount of martensite in the weld metal depended on the carbon equivalent of the steel with the highest amounts and highest hardness levels in conventional EH 36 (389 HV 5). Thermomechanically rolled steels contained less martensite and showed a correspondingly lower maximum hardness.ximum hardness.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.222-228
• /
• 2002

A comparison of the welding performance of ship hull structural steels has been made. The weldability of steels especially designed for laser processing was compared to that of conventional hull and structural steels with plate thicknesses up to 12 mm. Autogenous laser beam welding was used to weld butt joints as well as skid and stake welded T-joints. The welds were assessed in accordance with the document "The Classification Societies′ Requirements for Approval of $CO_2$ Laser Welding Procedures". Small imperfections in the weld only grew slightly in root bend tests and they only had a minor influence on the fatigue properties of laser fillet welded joints. In Charpy impact tests, the 27 J transition temperature of the weld metal and HAZ ranged from below -60 to -5$0^{\circ}C$. The amount of martensite in the weld metal depended on the carbon equivalent of the steel with the highest amounts and highest hardness levels in conventional EH 36 (389 HV 5). Thermomechanically rolled steels contained less martensite and showed a correspondingly lower maximum hardness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.7
• /
• pp.559-566
• /
• 2001

The sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. In this paper, we introduce and synthesize a new type of swing motion control system in which a small auxiliary mass is installed on the spreader. The actuator reacting against the auxiliary mall applies inertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the $H^{\infty}$ based gain-scheduling control technique to the anti-swing motion control system design problem of the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the simulation result shows that the proposed control strategy is shown to be useful for the case of time-varying system and, robust to disturbances such as winds and initial sway motion.

• Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.276-282
• /
• 2024

The present study was conducted to investigate the behavior and distribution characteristics of fishes near an artificial reef close to the waters of Uljin marine ranch. A 200-kHz, dual-beam frequency transducer was attached to the side of a ship for acoustic measurements. The fish formed small groups in the bottom layer near the artificial reef around the afternoon-sunset period; at night, the fish did not form groups and remained individually scattered. During dawn-sunrise and morning, the fish formed groups again and were found near the upper and middle layers of the artificial reef. High density of fish occurred near the middle of the nautical zone during morning, afternoon-sunset, and dawn-sunrise, periods; at nighttime, the distribution was uniform across the entire zone. Moreover, the mean Nautical Area Scattering Coefficients (NASC, m²/nmi²) value was highest during dawn-sunrise at 400.2 m²/nmi², similar during night and morning (100.5 m²/nmi²), and lowest during afternoon-sunset (20.1 m²/nmi²). The present study is expected to provide the background for understanding the behavioral characteristics of fish living near artificial reefs and estimating the density and biomass of fish.

• Journal of Korea Port Economic Association
• /
• v.36 no.2
• /
• pp.63-86
• /
• 2020

The tax lease scheme for ships is an advanced ship financing tool that generates tax benefits through accelerated depreciation of capital allowances and transferring them to the ship operator (leasee) via reductions in rental payments. The scheme was introduced by Japan in 1978 and by France in 1998 to support their shipping and shipbuilding industries. The size of tax benefits varies by country depending on the depreciation rate for ships, corporate tax rate, and the tax system on profits from the sale of ship. This study uses a virtual model of the Korean tax lease scheme for ships based on the French tax lease scheme. The size of tax benefits is calculated and compared to those in the French and Japanese tax lease schemes. According to the analysis, the size of the tax benefit was approximately 19% for France, 14% for Japan, and 12% for Korea. This is differentiated by the country's depreciation rate and corporate tax rate, which have the greatest impact on the size of tax benefits. For the Korean virtual model, if the tax benefits are distributed by the operator and the investor at the rate of 75:25, the operator is expected to enjoy tax benefits equivalent to about 9% of the ship price and the investor to enjoy 3%. Despite limited information and data regarding the tax lease scheme for ships, this study was the first attempt in Korea to design a virtual model of the Korean tax lease scheme based on some predictable assumptions. Therefore, a group of shipping, financing, and legal experts will follow up on more professional and practical reviews of the model in the near future. Hence, this study will serve as a small contribution to the early introduction of the Korean tax lease scheme for ships.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.60-77
• /
• 2021

From 2007 to 2011, four Goryeo Dynasty vessels, namely the Taean treasure ship, Taean Mado Shipwreck No.1, No.2, No.3 were discovered in Taean area, Chungcheongnam-do province. From the shipwrecks, 175 pieces of mokkan (wooden tablet) were excavated. These mokkans are the only case of Goryeo Dynasty and represent the unique usage of mokkan as cargo tags, after the paper replaced the wooden tablets as writing materials. The Taean mokkans provide details, such as the year, recipient, port of origin, types of the cargo, quantity and unit, the name of the responsible person for shipment. Thus, they enable us to speculate about the characteristics of the cargo. Furthermore, through studying the writing style, form, material and manufacturing method, researchers can extract which form and characteristics were favored at that time. The Taean mokkans have no preset style for writing. Therefore, they can be written selectively and freely. And since the mokkan were attached to cargos, mokkans with furrows on upper side were favored, and efficiency and simplification of the manufacturing process were priorities in making mokkans. The Taean mokkans can be compared to those from the Shinan ship and the Quanzhou ship because those are of the same era and use. On the writing styles and information, Chinese mokkans are focused on the cargo owners, while The Taean mokkan includes more detailed information, such as the recipients. In forms, Chinese mokkans have maximum thickness of 1.0 centimeter and have pointed edges in lower parts, while mokkans from Taean do not have fixed thickness or edges. Furthermore, Chinese mokkans and Korean mokkans have different styles from manufacturing methods and material selections. These differences between Chinese and Goryeo mokkan are related to the differences between littoral-transport Goryeo ships and ocean-transport Chinese ships, such as shipping distances, types of cargo, shipping systems, packing methods, and transport operators. At the moment, because there are only small amount of data and materials of Chinese mokkan, comparative studies regarding Goryeo and Chinese mokkan can only be fragmentary. However, this article can be a base from which to expand the scope of Goryeo mokkan studies.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1195-1202
• /
• 2016

Recently, a lot of studies that applying the big data technology to various fields, are progressing actively. In the maritime domain, the big data is the meaningful information which makes and gathers by the navigation and communication equipment from the many ships on the ocean. Also, importance of the maritime safety is emphasized, because maritime accidents are rising with increasing of maritime traffic. To support prevention of maritime accidents, in this paper, we developed a vessel traffic display and statistic system based on AIS messages from the many vessels of maritime. Also, to verify the developed system, we conducted tests for vessel track display function and vessel traffic statistic function based on two test scenarios. Therefore, we verified the effectiveness of the developed system for vessel tracks display, abnormal navigation patterns, checking failure of AIS equipments and maritime traffic statistic analyses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1355-1362
• /
• 2016

Recently, the marine leisure are being emphasized with improving the quality of life style by increased income and spare time. Also, there is a increasement of people's interest in marine leisure activities. But resources and facilities do not grow in proportion to the quantitative growth of the current marine leisure industry. Besides, a leisure ship operator tends to choose a simple or familiar route of the local area rather than a new leisure routes which are not explored due to lack of accessible areas information. This paper proposes a routes recommendation system in order to solve above problems based on marine resource database. The databases have been constructed through investigation and analysis of navigational information such as environmental conditions including weather conditions and sea status, field of marine leisure activities, tourist attractions and natural landscape, and marine leisure prohibited areas. Therefore we have developed and implemented the route recommendation system that provides various information necessary to route operation of leisure boats.