• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.230-239
• /
• 2024

Efforts are being made to replace ship diesel engines with electric propulsion motors in response to emission regulations. In particular, in the case of short-range small ships, research is being conducted to replace polymer electrolyte membrane fuel cells (PEMFC) with power sources. However, PEMFC has problems such as slow dynamic response characteristics and reduced durability at high temperatures. To solve this problem, a high-precision ship model was developed with power distribution and thermal management strategies applied, and through this, the required power, heat, and power characteristics of the propulsion system according to the ship's speed profile were analyzed.

• 대한조선학회논문집
• /
• 제60권3호
• /
• pp.175-185
• /
• 2023

Many small vessels such as fishing boats operate in the world's oceans; accordingly, interest in these small vessels' exhaust-gas problem is increasing. Research on the application of electric-propulsion technology has been steadily conducted; however, the subject is limited to research ships or leisure boats, while research on application efficiency remains insufficient. This study attempts to apply lithium-battery electric-propulsion technology to small ships. A gross tonnage of 9.77, a representative fishing boat, is to be redesigned as a fully electrified ship. Without changing the main cabin's dimensions and fuel tanks, the ship's propulsion system is redesigned based on a lithium-battery electric-propulsion system. In addition, the redesigned system is compared with the original sample ship's diesel-propulsion system for application-effect analysis. The results indicate that under controlled sailing conditions, the weight and volume of the electric-propulsion system are 9.5 and 10.5 times those of the diesel-propulsion system, respectively. These values indicate that the system cannot meet fishing boats' high endurance requirements. Therefore, under the existing technical conditions, applying the full lithium-battery electric-propulsion system to solve the problem of high emissions from fishing boats shows limited feasibility.

• 한국항해항만학회지
• /
• 제47권6호
• /
• pp.358-366
• /
• 2023

본 연구는 해양수산부의 '지능형 해상교통정보시스템' 서비스 중 '사고취약선박 모니터링 서비스'의 선박 충돌 경보를 개선하기 위한 것으로, 현재의 선박 충돌 경보는 대형 선박 위주의 데이터와 그 운항자에 기반한 설문조사 레이블을 가지고 지도 학습(SL)한 모델을 사용하고 있다. 이로 인해, 소형선박 데이터 및 운항자의 의견이 현재 충돌 지도학습 모델에 반영되지 않아, 소형선박 운항자가 느끼는 체감보다 먼 거리에서 경보가 제공되기 때문에 그 효과가 미비하다. 또한, 지도학습(SL) 방법은 레이블링 된 다수의 데이터가 필요하지만, 레이블링 과정에서 많은 자원과 시간이 필요하다. 본 논문은 이러한 한계를 극복하기 위해 준지도학습(SSL)의 알고리즘인 Label Propagation과 TabNet을 사용하여 레이블이 결정되지 않은 데이터를 활용하여 소형선박을 위한 충돌 경보의 분류 모델을 연구하였다. 충돌 경보의 분류 모델을 활용하여 소형선박 운항자를 대상으로 실해역 시험을 수행한 결과 운항자의 만족도가 증가하는 결과를 확인하였다.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.191-200
• /
• 2000

VTS에서는 소형 선박들에 대한 운항정보의 파악이 어려우므로 관제에 애로가 많다. 즉, GMDSS의 대상이 아닌 소형 선박들이 평상시에 선명 및 위치정보를 전송하고, VTS에서는 입ㆍ출항하는 모든 선박들의 선명과 위치를 용이하게 확인하고 항내에서의 해난사고가 발생하지 않도록 통제할 수 있는 시스템이 필요한 실정이다. 본 연구의 항행정보 전송관리시스템은 micro-processor를 이용하여 CPS의 데이터 중에서 위치와 시간정보를 추출하고 여기에 선박의 ID를 추가하여 2,400[bps]의 저속으로 447[MHz], FSK의 송신기로 전송할 수 있는 시스템을 구현하였다. VTS에서는 이것을 수신, 복조하여 선박의 항행상태를 확인할 수 있다. 실험단계에서는 목포항을 중심으로 항해중의 데이터를 전송하였고, 수신점에서는 해도상에 실시간으로 위치를 표시하는 소프트웨어를 개발하였다. 원거리의 서비스를 위하여 기존의 SSB 통신망에 접속할 수 있는 하드웨어적인 융통성도 고려하였다.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.

• 한국정보통신학회논문지
• /
• 제1권2호
• /
• pp.209-220
• /
• 1997

직접위성방송(DBS)은 해상에까지 광범위한 방송서비스를 제공할 수 있는 매우 유용한 매체이다. 그러나 해상에서의 DBS 수신장치는 선박의 운항이나 동요의 상태에 관계없이 안테나가 위성을 계속 추적해야 하는 복잡한 제어장치를 필요로 한다. 본 연구는 한반도 연 근해를 항해하는 선박에서 Koreasat의 DBS를 수신할 수 있는 장치의 개발이 목표였으며, 특히 소형선박에 쉽게 탑재하고 사용할 수 있도록 다른 항법장비와 연계됨이 없이 장치의 독립적인 운용형태로 설계하였고 소형, 경량, 저가격화에 중점을 두었다. 그러므로 한반도 연·근해에서 koreasat의 탐색과 추적조건을 분석하고 이에 적합한 Az/El 2축 마운트를 설계하여 제작하였으며, 스텝트랙(step track) 방식에 의한 추적과 각속도 센서를 이용한 마운트의 동요보정 기능을 연구하였다. 실험을 위하여 장치를 탑재할 수 있는 선박운동 시뮬레이터를 제작하여 목표치의 동요를 구현하고, 추적과 동요보정에 따른 수신상태를 측정, 분석하면서 실험적으로 최적의 알고리즘을 구현하였다.

• 해양환경안전학회지
• /
• 제1권1호
• /
• pp.95-106
• /
• 1995

The small-waterplane-area-twin-hull(SWATH) ship has been recognized as a promising high performance ship because of her superior seakeeping characteristics and large deck area for various operations compared to the conventional monohull ship. significant advances in analytical technics for the prediction of the ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for SWATH ship have been much developed during the last twenty years. Based on these developments in technology an integrated computational procedures for prediction wave loads and structural responses can be used to get a accurate results. But the major problem of SWATH ship's structural design is the accurate prediction of structural responses by the maximum critical loads likely to be experienced during the life of SWATH. To get a easier and safer computational procedures and the analytical approach for determining the accurate structural responses, a case study has been presented through the project experienced.

• 수산해양교육연구
• /
• 제27권6호
• /
• pp.1734-1744
• /
• 2015

Majority of marine accidents that occur on fishing vessels are engine accidents. This comprises more than 26 % of the total annual fishing vessel marine accident cases. Large numbers of engine accidents happen in the cooling water system, which are mostly caused by negligence on regular check-up and repair. Notably, small-sized ships have higher engine accidents occurrence rate compared to medium-and large-sized ships. Based on the Report of the Korea Ship Safety Technology Authority, engine accident cases reached 3,032 out of the total 3,081 cases. This study researches on the differences between the small-sized ship pilot, an operator of a vessel engine of less than 200 tons, and a 6th level marine engineer, in terms of the relationship between management forms and what causes the marine accidents in association with the cooling water system. It also studies and analyzes the differences in frequency of the accident occurrence between the two groups. ${\chi}^2$ qualification was imposed through the SPSS statistical analysis program and it got qualified at the significance level of 5%. The research shall be utilized as one of the base line data for the reduction of marine accidents.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.335-342
• /
• 1999

The purpose of present research is to develop and efficient numerical method for the calculation of potential flow and predict the wave-making resistance for the application to ship design of tuna purse seiner. Havelock was considered the wave resistance of a post extending vertically downwards through the water from the surface, its section by a horizontal plane being the same at all depths and having its breadth small compared with its length. This enables us to elucidate certain points of interest in ship resistance. However, the ship has not infinite draft. So, the problem which is investigated ind detail in this paper is the wave resistance of a mathematical quadratic model in a uniform stream. The paper deals with the numerical calculation of potential flow around the series 60 with forward velocity by the new slender ship theory. This new slender ship theory is based on the asymptotic expression of the Kelvin-source, distributed over the small matrix at each transverse section so as to satisfy the approximate hull boundary condition due to the assumption of slender body. The numerical results using the panel shift method and finite difference method are compared with the experimental results for wigley mono hull. There are no differences in the wave resistance. However, it costs much time to compute not only wave resistance but also wave pattern over some range of Froude numbers. More improvements are strongly desired in the numerical procedure.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.259-265
• /
• 2015

It is clearly understood that e-navigation is beneficial to prevent collision and grounding of ships. The purpose of this study is to define and present a future ship operation system under the e-navigation environment in order to provide clear direction for the design of Korean e-navigation system. The future ship operation system consists of shipboard navigational system, shore supporting system and maritime communication system. To achieve the objectives of this study, the ship operation system was discussed separately into SOLAS ships and non-SOLAS ships in this study. In SOLAS ships, mariners become a system manager, choosing system presets, interpreting system output, and monitoring vessel response. In small ships and fishing vessels, mariners may enjoy their navigation by using the automatic tracking of ship's position on the portable electronic chart display. The improved bridge design, integrated and harmonized navigational system and single window reporting will reduce significantly the administrative and physical workload of mariners. Mariners can concentrate their attention more on navigational duty under the e-navigation environment. To build an effective Korean e-navigation system, the essential navigational functions and e-navigation services for small ships and fishing vessels must be identified and developed taking into account user needs.