• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.183-198
• /
• 1997

This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.10-20
• /
• 2014

To study the water-entry impact noise, on-board experiment using a small launcher firing various objects was performed in the Yellow Sea. As the launcher fires a cylindrical object from the ship vertically, generated noise is measured with a hydrophone on the starboard of Chung-hae, Marine surveyor. Three types of cylindrical objects, which have noses of flat-faced, conical, and hemisphere, were used during the experiment. The measured noise exhibits a time-dependency which can be divided into three phases: (1) initial impact phase, (2) open cavity flow phase, (3) cavity collapse and bubble oscillation phase. In most cases, the waveform of bubble oscillation phase is dominant rather than that of initial impact phase. Pinch-off time, where a cavity begins to collapse, occurs at 0.18 ~ 0.2 second and the average lasting time of bubble was 0.9 ~ 1.3 second. The energy of water-entry impact noise is focused in the frequency region lower than 100 Hz, and the generated noise is influenced by the nose shapes, object mass, and launching velocity. As a result, energy spectral density on the bubble frequency is higher in the order of flat-faced, conical, hemisphere nose, and the increase of initial energy raises the energy spectral density on the bubble frequency in the cylinder body of same shape. Finally, we compare the measurements with the simulated signals and spectrum based on the bubble explosion physics, and obtain satisfactory agreements between them.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.51-59
• /
• 2019

This study aims to examine the design and construction methods of movable Pavilions. Through the literature analysis, the setting up of the construction background, location and direction, size and composition, materials and construction methods were analyzed. The results are as follows; First, the movable pavilion is designed to enjoy a wide range of views. It was a creation that reflected the way in which the ideal life was pursued based on the experience of enjoying scenery rather than owning one's own house and running a pavilion. Second, the formation of movable pavilion was intended to enjoy the scenery by season without restrictions on time and place. It can also relieve the hassle of having to move tools to enjoy the wind every time. Third, the movable pavilion faces to a place with good scenery and determines its position and direction. Most of them were built on a small scale and divided the space for viewing the scenery, playing GO(Baduk), writing poems, and playing musical instruments. Also, wood was used mainly. To reduce the load, roofs and walls were constructed with light materials such as bamboo, straw, thick sheet of oil, and cotton cloth. The construction method was mainly used by the method of fastening for easy coupling and dismantling. When a building was constructed on the upper part of a ship or cart, the wooden structure of a regular pavilion was constructed. Fourth, when comparing the design and construction characteristics of ordinary pavilion and movable pavilion, the movable pavilion is easy to see for contrast purposes, so there is no limit to setting the location and direction. Instead, more stringent systems and techniques were called for, because as mobility forces should be considered, structurally measures to withstand loads, and they should satisfy their function and form as pavilion.

• Journal of Fisheries and Marine Sciences Education
• /
• v.13 no.1
• /
• pp.99-116
• /
• 2001

Testing is a procedure used to measure a sample of behaviour in order to discover how well a seafarer performs, usually in comparison with others, or compared with identified performance criteria. In this context It is important that the test, in whatever form it is being used, yields consistent results by being valid, reliable and practical. Whilst we can only take a sample of a person's knowledge or comprehension about topic in this way, testing methods do provide a more reliable estimate of performance than most other observational techniques; unsystematic or irregular observation being too unreliable. The method of examination has been specified in the provisions of Regulation 12 of the Decree of the ship officers act as followings. Other necessary matters for conducting oral and written examinations have been set out by the Minister. But written examination is too shortage of period and small number of question to cover the qualification of each level and oral test is just simple and namely Traditionally, written examinations have been provided as the only means for determining the acquisition of knowledge by the mariner. Typically, the examination formats have taken the format of either an essay or multiple choice examinations. Essay items, used in the vast majority of subject examination(not in Korea), consisted of three basic types: situational, descriptive and computational. The level of certificate being examined determined the number and mix of the type of essay questions selected. Oral question has again been used by assessors of seafarer in a wide variety of contexts. Also, oral questioning is often used when observation of performance is undertaken to ask why a certain action has been taken, or to be broaden the scope of what has been observed. At end, Each techniques have their own advantage and disadvantage, so we have to choose some or all of the following techniques, depending upon the certificate, qualification or job for which the trainee is aiming. But in high lank, we have to use both of essay type and multiple choice and with enough time of oral test at least 30 minutes. Who would be the assessor? According to the STCW Code Section A-I/6, instructors, supervisor and assessors are appropriately qualified for particular types and levels of training or assessment of competence of seafarers either on board or ashore, as required under the Convention, in accordance with the provisions of this section.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.3
• /
• pp.162-168
• /
• 2017

Shallow-water bathymetry survey has been conducted using high definition color images obtained at the altitude of 100 m above sea level using a drone. Shallow-water bathymetry data are one of the most important input data for the research of beach erosion problems. Especially, accurate bathymetry data within closure depth are critically important, because most of the interesting phenomena occur in the surf zone. However, it is extremely difficult to obtain accurate bathymetry data due to wave-induced currents and breaking waves in this region. Therefore, optical remote sensing technique using a small drone is considered to be attractive alternative. This paper presents the potential utilization of image processing algorithms using multi-variable linear regression applied to red, green, blue and grey band images for estimating shallow water depth using a drone with HD camera. Optical remote sensing analysis conducted at Wolpo beach showed promising results. Estimated water depths within 5 m showed correlation coefficient of 0.99 and maximum error of 0.2 m compared with water depth surveyed through manual as well as ship-board echo-sounder measurements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.674-680
• /
• 2013

As the range of marine leisure activity gradually expands to ocean-going, a habitable cruise boat has been getting the limelight. Advanced countries in the marine leisure industry in Europe and North America have already secured their competitiveness in designing and building cruise boats by elegant design, ergonomic structure and fuel efficiency through the adoption of light-weight hull materials. In contrast, mostly small power boats are developed and built in Korea, and GFRP take up the most of hull materials. This study inquired into the design and characteristics of a 50ft-class CFRP that ocean-going is possible. The hull-form of the CFRP cruise boast were analyzed to propose a hull form for the designed ship (MMU-C.B), and based on that, the design model of the MMU-C.B was built. Finally, the MMU-C.B's characteristics of the resistance performance and hull-planing were found by comparative reviews with the results of model tests of GFRP pleasure yachts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.532-540
• /
• 2017

This paper suggests study of basic structure design and structural analysis for the twin car-ferries. The rules and methodology for the strength analysis of medium and small sized high speed vessels with a length of more than 50m and a length/width ratio of more than 12, such as car-ferries, have not been clarified yet. Therefore, in this paper, the members scantling were carried out using the KR Rule, and the car-ferry exclusive vessel standard were further applied to verify the structural strength the design. The scantling of the members is based on the Korea Classification standards, and the car-ferries standards were additionally applied to verify the structural strength of the design. Especially, the ultimate strength of hull girder was additionally carried out by using car-ferry exclusive vessel standard, and proposed to overcome ambiguity of design by existing standard. The results of this study are expected to be useful as basic data related to structural design and structural analysis of high speed twin-hull car-ferries. The present car-ferry design has a sufficient safety margin in strength point of view according to the KR rule.

• Journal of Environmental Health Sciences
• /
• v.33 no.6
• /
• pp.506-512
• /
• 2007

This study was conducted to describe the exposure levels of welding fumes by the type of manufacturers, work process, welding type and the size of manufacturers, and to find out the trend of chronological changes of airborne welding fume levels. The subjects of this study were 509 manufacturers, consisting of 11 types of manufacturers, 3 work processes, 7 welding types, in Busan from January, 1997 to December, 2005. Airborne concentration of welding fume was determined by manual of National Institute for Occupational Safety and Health (NIOSH), and the data were analyzed by using SPSS 10.0 for Windows program. The mean concentration of airborne welding fume in all manufacturers was $1.29\;mg/m^3$ (Range: $0.01{\sim}3.00\;mg/m^3)$. The level of welding fume was the highest, as $1.96\;mg/m^3$, for manufactures of motor vehicles, trailers and semi-trailers, which was lower than $5.0\;mg/m^3$ of 8 hr-TWA in Korean permissible exposure limit for welding fume. There was a significant difference in the mean levels of welding fumes by work process, showing the highest in welding workshop ($1.39\;mg/m^3$), followed by pipeline welding workshop ($1.26\;mg/m^3$) and engineering workshop ($1.20\;mg/m^3$). Among welding types, the mean level of welding fume was the highest in the type of $CO_2$ & arc welding, as $1.46\;mg/m^3$, followed by $CO_2$ welding ($1.40\;mg/m^3$), shielded metal arc welding ($1.31\;mg/m^3$), spot welding ($1.27\;mg/m^3$), and so on. The highest mean level of welding fume was $1.58\;mg/m^3$ in work process of pipe line welding workshop for the manufacturers of basic iron and steel, and $2.27\;mg/m^3$ in the type of arc welding for the manufactures building ship and boats. By the size of manufacturers, the mean concentration of welding fume for manufactures in small scale with less than 50 workers was the highest as $1.45\;mg/m^3$ (Range: $0.07{\sim}3.00\;mg/m^3)$. The mean level of welding fume was the highest as $1.39\;mg/m^3$ both in 1997 and in 2005, showing a trend of fluctuating periodically within a range of $1.10{\sim}1.39\;mg/m^3$. The above results suggested that more effective control program for work environment producing welding fumes should be developed and applied since there were significant variations in welding fume levels by the type of manufacturers, work processes, welding types, the size of manufactures, and by year.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.744-753
• /
• 2015

This paper presents the results of research on developing marine unified communications to provide VoIP service based on marine satellites. With the recent popularity of smart-phones and other mobile devices, the demand for Internet-based wired and wireless unified technology has been growing in marine environments, and increasing interest is being directed to VoIP products and service models with high price competitiveness and the ability to deliver a variety of services. In this regard, this research designed three instruments, developed their unit modules, and verified their performances. These three instruments included the following: (1) a marine VoIP module equipped with an analogue gateway that can be linked to the existing devices used in vessels, which is more than 80% smaller than that of a land system; (2) a text/voice/video engine for marine satellite communications that runs on technology that minimizes communication data usage, which is a core technology for a marine VoIP service; and (3) a unified communication service that can support multilateral cloud-based message conversations, telephone number-based call functions, and voice/video calling between a private space in a ship and shore.