• Title/Summary/Keyword: Small port

Search Result 647, Processing Time 0.02 seconds

A Deflection Routing using Location Based Priority in Network-on-Chip (위치 기반의 우선순위를 이용한 네트워크 온 칩에서의 디플렉션 라우팅)

  • Nam, Moonsik;Han, Tae Hee
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.11
    • /
    • pp.108-116
    • /
    • 2013
  • The input buffer in Network on Chip (NoC) router plays a key role in on-chip-network performance, which is utilized in flow control and virtual channel. However, increase in area and power due to input buffers as the network size gets larger is becoming severe. To solve this problem, a bufferless deflection routing without input buffer was suggested. Since the bufferless deflection routing shows poor performance at high network load, other approaches which combine the deflection routing with small size side buffers were also proposed. Nonetheless these new methods still show deficiencies caused by frequent path collisions. In this paper, we propose a modified deflection routing technique using a location based priority. In comparison with existing deflection routers, experimental results show improvement by 12% in throughput with only 3% increase in area.

An Implementation of Spirometry System Based Differential Pressure Method (차동 압력 방식을 이용한 호흡측정 시스템 구현)

  • 김요한;신창민;김영길
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2002.11a
    • /
    • pp.440-447
    • /
    • 2002
  • This paper considerated about exact flow volume calculation method from factors having an influence on measurement and introduced in anesthesia ventilator realized spirometry system. System used differential pressure sensing method with factors, that is temperature, pressure, gas density, humidity and mucus etc. System optimized for low power system for mobile system. System composed analog interface part, signal processing part, display part. Analog interface part have differential pressure flow sensor and defferential pressure sensor. Signal processing part have AVR processor for low power system display part use serial port (RS232, SPT). so it display at pc monitor or send to anesthesia ventilator. System is stable by linearizing 2th characteristics of flow-differential pressure, auto correction of sensor. Noise reduced by algorithm with analog filter and digital processing. Small, light, low power system is good at mobile system and applied to patient in emergency or mobile. and, System is useful at anesthesia ventilator by using flow sensor.

  • PDF

A Study on Course Stability in Accordance with Configuration of Ships (선형에 따른 선박의 침로 안정성에 관한 연구)

  • 권종호
    • Journal of the Korean Institute of Navigation
    • /
    • v.10 no.2
    • /
    • pp.97-114
    • /
    • 1986
  • Ship's maneuverability is very important factor in safe ship handling and economical ship operation. Steering characteristics are consisted of course stability and maneuverability. Today in many advanced ship-building countries, they study ship's course stability, using model ship tests, such as straight line tests, rotating arm tests and Planar Motion Mechanism (PMM) etc., in tow in tanks. It is the purpose of this paper to provide ship's handlers with better understanding of steering characteristics and to help them in safe controlling and manevering . In this paper, the author simulated response of various vessels, running straight course with constant speed, and they are disturbed by small external disturbance of one degree yaw angle with no angular velocity . The author used the hydrodynamic derivtives resulted at tests of Davidson's laboratory in Stevens Institute of Technology, New Jersey, U.S.A. Course stability was evaluated and analyzed in various respects, such as block coefficient, ratio of ship's length to beam, draft and rudder area ratio etc. The obtained results are as follows : (1) The ship's course stability is affected by magnitude of block coefficient greatly. In case that the block coefficient is more than 0.7, the deviation varies at nearly same rate but the requistite time to reach the steady course is different. (2) The ship's course stability is affected by magnitude of L/B. When the dimensionless time reaches about 3, the deviation and requisite time to reach the steady course are influenced nearly same. After the dimensionless time is about 3, they change on invariable ratio. (3) The effect to course stability by L/T and RA' can be neglected. (4) The reason why thy VLCC and container feeder vessel are unstable on their course is that their block coefficient is generally more than 0.8 and the ratio of ship's length to beam is about 6.0.

  • PDF

The PALM system : Architecture and Network Performance (PALM시스템의 구조와 네트웍 성능)

  • Kim, Suk-Il
    • The Transactions of the Korea Information Processing Society
    • /
    • v.1 no.1
    • /
    • pp.105-113
    • /
    • 1994
  • This paper introduces the Parallel Advanced Loosely coupled Multiprocessor (PALM) architecture, which is based on HCH(m,p), where m is number of links per a communication processor (CP) and p is the number of application processors (APs) connected to the CP. communication links between a pair of CPs and/or between a CP and an AP, are made of dual-Port RAMs, which provide fast and reliable word-parallel communication between processors. Among the wide spectrum of HCH networks, HCH(m,2) is also known to be a cost optimal topology, such that HCH(m,2) consists of the largest number of APs retaining the minimal number of CPs and communication links. We also implement a testbed based on HCH(2,2). The experiment result shows that the small communication/computation ratio of the PALM system would realize fine-grain parallelism on message-passing MIMD systems.

  • PDF

A Study on the IUU Governance System of Regional Fishery Management Organization and Major State (국제 지역 수산 관리 기구와 주요 국가의 IUU 통제제도 연구)

  • Park, Min-Gyu
    • The Journal of Fisheries Business Administration
    • /
    • v.41 no.3
    • /
    • pp.103-127
    • /
    • 2010
  • The FAO reports that IUU fishing activities have widespread economic, social, and management consequences, including depriving legitimate fishers of harvest opportunities. It affects all fisheries from small scale to industrial. It also affects the ability of governments to support sustainable livelihoods for fishers and, more broadly, to achieve food security. The complexity of IUU requires various measures to combat IUU fishing such as adoption of IUU vessel lists; stronger port State controls; improved monitoring, control and surveillance (MCS); implementation of market-related measures to help ensure compliance; and capacity-building assistance. Trade and market measures reduce opportunities for IUU fishing activities by precluding or impeding access to markets for IUU product in a manner consistent with international law. ICCAT, CCAMLR, and IATTC, have put in place trade tracking programs or catch documentation schemes, and WCPFC is considering such a program. Vessel lists assist enforcement authorities in determining which vessels are or are not authorized to be fishing or conducting fishing support activities in specified areas. A number of RFMOs maintain records of IUU vessels: CCAMLR, IATTC, ICCAT, NAFO, NASCO, NPAFC, WCPFC. Section 608 of the US MSRA calling on the Secretary of Commerce, in consultation with the Secretary of State, and in cooperation with relevant regional fishery management councils and any relevant advisory committees, to take actions to improve the effectiveness of international fishery management organizations in conserving and managing stocks under their jurisdiction. EU IUU Regulation entered into force on 1 January 2010, was intended to regulate the highly complex multi-channel fisheries supply system of the European Community (EC) in an effort to improve global fisheries sustainability.

A Study on the Status of Using University Cafeteria and Preference of Food in Incheon (대학생 학교식당 이용실태 및 식품선호도에 관한 조사연구 -인천지역을 중심으로-)

  • 이강자;변소윤
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.2 no.1
    • /
    • pp.57-68
    • /
    • 1992
  • In order to obtain the information on the status of using university cafeteria and students' preferences, the survey was conducted through questionaires to 434 students(male:195, female : 239) of 8 universities - 2 universities employed dietitian and 6 universities which didn't employ dietitian -through all the area of Incheon from 19th November 1990 to 14th December, 1990. The results obtained were as follows. 1) For keeping temperature of meals until service to students Refrigerator or warming cabinet or putting meals on low flames were used, and the amount for one person was almost decided by rough estimation by experience. All the foods remained were discarded. Also most of the cooking manager's age were from 50 to 59 and almost cooking managers graduated middle school. The fuel to cook was gas or kerosene. Method to disinfect tableware was boiling. 2) In case of the frequency of using university cafeteria, male students used cafeteria more often than female students, and regardless of sex students made use of cafeteria for lunch more than for breakfast and supper. Students also used university cafeteria not employing dietitian more than cafeteria employing dietitian. Disregarding of male, female, cafeteria employing cafeteria not employing dietitian, all students pointed out that main reason for using cafeteria were 'low price' and 'no other place to eat' And minor reasons were ' good taste' and 'meal quality'. On the contrary, the case of not using cafeteria were 'waiting in line' to male students, 'poor taste' to female students, 'waiting in line' and 'no varieties' on the cafeteria which employed dietitian, 'poor taste' and 'poor hygienes' on the cafeteria which didn't employ dietitian. 3) Considering of the preferences of menu, both male and female students liked "Bibim Bab" And male students prefered meals which contained broth both but female students prefered a light meals. 4) the difference of preferences showed that female student's preferences were high at all foods, and the preferences of fruits were high for both students. In detail, male students liked port, liver and small intestine of cattle, oyster and beans boiled in soysauce. But female students likde milk, yogurt and cucumber.

  • PDF

논제 부정 Access에 대한 Firewall의 과제와 대책

  • 변성준;서정석;최원석
    • Proceedings of the Korea Database Society Conference
    • /
    • 2000.11a
    • /
    • pp.227-238
    • /
    • 2000
  • Firewall은 다양한 부정Access의 방지책으로서 확실히 유효한 수단이지만 이 Firewall은 사용자로부터 지시된 설정을 충실히 실행하는 것으로 설정 오류, 소프트웨어의 정지, 허가된 룰을 악용한 침입 등 반드시 사용자가 바라는 작용을 무조건적 상태에서 보증해 주는 것은 아니다. 따라서 사용자는 도입 후 에도 운용시에 Access log를 감시하고 본래의 Security Policy에 반하는 행위를 매일 매일 체크하지 않으면 안될 상황에 처해 있다. 본 연구는 이러한 부정Access에 대한 이와 같은 Firewall의 현상에 대한 과제 중에서 "부정Access를 어떻게 하면 일찍, 정확히 체크할 수 있는가\ulcorner"라는 주제를 선택하여 Firewall의 한계와 그 대응책을 실제로 부정Access를 시험해 보는 것으로 검증하기로 하였다. 실험결과에서 (1)Port Scan이나 전자메일 폭탄(서비스정지공격)등은 Firewall로 방지하는 것은 불가능하거나 혹은 Checking이 곤란하다. (2)공격마다 로그 수집을 했음에도 관계없이 Firewall의 로그는 번잡하므로 단시간에 사태의 발견이 대단히 곤란하다고 하는 Firewall의 한계를 인식하였다. 그리고 그 대책으로서 우리는 체크 툴의 유효성에 착안하여 조사한 결과, 결국 무엇이 부정Access인가에 대해서는 어디까지나 이용하는 측이 판단하여 Firewall 상에 설정하지 않으면 안되지만 체크 툴은 이 부정Access 정보를 데이터베이스로서 갖고 있음으로써 '무엇이 부정Access인가'를 이용자 대신에 판단하고 툴에 따라서는 설정을 자동적으로 변경하여 부정 Access의 저지율을 향상시킨다. 이처럼 체크 툴은 Firewall의 수비능력을 보강하는 위치에 있다고 생각할 수 있다.다. 4 장에서는 3장에서 제기한 각각의 문제점에 대해 RAD 의 관점에 비추어 e-business 시스템의 단기개발을 실현하기 위한 고려사항이나 조건 해결책을 제안한다. 본 논문이 지금부터 e-business 를 시작하려고 하는 분, e-business 시스템의 개발을 시작하려고 하는 분께 단기간의 e-business 실현을 위한 하나의 지침이 된다면 다행이겠다.formable template is used to optimize the matching. Then, clustering the similar shapes by the distance between each centroid, papaya can be completely detected from the background.uage ("Association of research for algorithm of calculating machine (1992)"). As a result, conventional NN and CNN were available for interpolation of sampling data. Moreover, when nonlinear intensity is not so large under the field condition of small slope, interpolation performance of CNN was a little not so better than NN. However, when nonlinear intensity is large under the field condition of large slope, interpolation performance of CNN was relatively better than NN.콩과 자연 콩이 성분 분석에서 차이를

  • PDF

Evaluation of Discharge Current Employing Generalized Energy Method and Integral Ohm's Law Using Finite Element Method (유한요소법을 이용한 일반화된 에너지법과 옴의 적분법에 의한 방전 전류 계산)

  • Lee, Ho-Young;Kim, Hong-Joon;Lee, Se-Hee
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.60 no.2
    • /
    • pp.357-361
    • /
    • 2011
  • The terminal current in voltage driven systems is an essential role for characterizing the pattern of electric discharge such as corona, breakdown, etc. Until now, to evaluate this terminal current, Sato's equation has been widely used in areas of high voltage and plasma discharge. Basically Sato's equation was derived by using the energy balance equation and its final form described physical meaning explicitly. To give more general abilities in Sato's equation, we present a generalized approach by directly using the Poynting's theorem incorporating the finite element method. When the magnetic field effect or the time-dependent voltage source is considered, this generalized energy method can be easily applicable to those problems with any dielectric media such as gas, fluid, and solid. As an alternative approach, the integral Ohm's law resulting in small numerical errors has an ability to be applied to multi-port systems. To test the generalized energy method and integral Ohm's law, first, the results from two prosed methods were compared to those from Sato's approach and an analytic solution in parallel plane electrodes. After verification, the generalized method was applied to the tip-sphere electrodes for evaluating the terminal current with three carriers and the Fowler-Nordheim field emission condition. From these results, we concluded that the generalized energy method can be a consistent technique for evaluating the discharge current with various dielectric materials or large magnetic field.

Analysis of the Influence of the Design Factors and Modeling for the 8inch Class Down-the-Hole Hammer (8인치급 다운더홀(DTH) 해머의 모델링 및 설계 인자에 따른 영향도 분석)

  • Lee, Chung No;Hong, Ki Chang;Jeong, Heon Sul
    • Journal of Drive and Control
    • /
    • v.14 no.4
    • /
    • pp.1-8
    • /
    • 2017
  • The Down-the-Hole hammer is one of the pneumatic drill equipment used for grinding, drilling, and mining. One the advantages of which is that a reduction work efficiency at deep site are relatively small compared to other drilling methods. Due to the large vibration in the underground area, it is difficult to measure the performance of the hammer, and hammer testing requires substantial production cost and operating expenses so research on the development of the hammer is insufficient. Therefore, this study has developed a dynamic simulation model that apprehends the operating principles of an 8-inch DTH hammer and calculates performance data such as performance impact force, piston speed, and BPM. By using the simulation model, design factors related to strike force and BPM were selected, and the influence of each design factors on performance was analyzed through ANOVA analysis. As a result, be the most important for BPM and the strike force are position of upper port that push the piston in the direction of the bit and in BPM, the size of the empty space between the bits and the piston is the second most important design factor.

Imabari Maritime Cluster: A Case Analysis of Japan Maritime Cluster (이마바리해사클러스터의 사례분석)

  • HAN, Jong-khil
    • The Journal of shipping and logistics
    • /
    • v.34 no.4
    • /
    • pp.695-710
    • /
    • 2018
  • Following the collapse of Hanjin Shipping, building a strong maritime cluster is one of the policy measures for the re-construction of the Korean shipping and shipbuilding industries. Thus, the purpose of this study is to develop a policy alternative for building a maritime cluster. Using Porter's diamond models, we analyzed the Imabari maritime cluster of Japan, which is characterized by cooperation between key industries, such as shipping, shipbuilding, shipbuilding equipment, and finance. The Imabari Maritime Cluster is equipped with complete domestic demand conditions and related supporting industry conditions. Although the strengths of the production conditions include excellent family-based management and strong support from regional administration and banks which develops independency among cluster members, the weak points include the absense of robust port services and difficulty in recruiting young talent in small and medium-sized cities. We can confirm that the company's strategy is focused on stable management, rather than a short-term view.