• 제목/요약/키워드: Small hydro

검색결과 242건 처리시간 0.022초

강우형태변화에 의한 소수력발전소 수문학적 성능의 변화 (Hydrologic Performance Change of Small Scale Hydro Power Plant with Rainfall Condition Change)

  • 박완순;이철형
    • 한국태양에너지학회 논문집
    • /
    • 제29권6호
    • /
    • pp.56-61
    • /
    • 2009
  • The effects of design parameters for small scale hydro power(SSHP) plants due to climate change have been studied. The model to predict hydrologic performance for SSHP plants is used in this study. The results from analysis far rainfall conditions based on KIER model show that the capacity and load factor of SSHP site had large difference between the period. Especially, the hydrologic performance of SSHP site due to rainfall condition of recent period varied in design flowrate sensitively. However climate change gave small effect in load factor of existing SSHP plant. And also, the methodology represented in this study can be used to decide the primary design specifications of SSHP sites.

농업용 보에 적용된 카프란 수차 발전기의 동작 분석 (Characteristic Analysis of Kaplan Water Turbine Generator Applied to Agricultural Reservoirs)

  • 김종겸;류연수
    • 전기학회논문지
    • /
    • 제64권5호
    • /
    • pp.689-693
    • /
    • 2015
  • Recently, many advanced countries are devoted to the development of eco-friendly new-renewable energy to prepare for the depletion of resources. Korea belongs to the absolute lack of energy to import from abroad 97% of energy use. So, development and supply of eco-friendly energy such as small hydro power has been required even more. Our country has a large number of small-sized reservoirs and dams. So, hydro generator has been installed at the small reservoirs and dams with the economy. Since the discharge flow of agricultural reservoir is not constant, the guide vane of wicket gate is used for adjusting the output of the generator.

저탄소 녹색도시 조성을 위한 신도시 하수처리시설의 에너지 자립 효과 분석 (Effect Analysis on Self-supporting Energy of Newtown Sewage Treatment Facility for Low-carbon Green City)

  • 안수정;현경학;김종엽;정연규
    • 상하수도학회지
    • /
    • 제24권6호
    • /
    • pp.683-690
    • /
    • 2010
  • Renewable and unutilized energy (biogas power generation, wind power, solar, small hydro-power, sewage heat source, etc.) seems to be suitable to install for the sewage treatment facilities. There are 357 sewage treatment plants in 2007. 17 plants among these have been operating for self-supporting energy by using solar power, small hydro-power and biogas in 2008. Newly built sewage treatment plant of 96,000 $m^3$/day for a newtown is expected to get up to energy consumption of 10 GWh/yr. If solar energy, small hydro-power and biogas-equipments were applied to the new treatment plant, self-supporting energy of the new sewage treatment plant will get up to 56.1%. As a results, about 2,379ton $CO_2$/yr $CO_2$ emission reduction can be expected by using renewable energy. These efforts for self-supporting energy will lead sewage treatment plant to new energy recycle center.

캠버각 변화에 따른 소수력 축류 프로펠러 수차의 유동 특성 연구 (Performance Characteristics of an Axial Propeller Small-hydro Turbine with Various Cambers of Runner Blade)

  • 변순석;김태윤;한상목;김정환;김윤제
    • 신재생에너지
    • /
    • 제8권2호
    • /
    • pp.44-51
    • /
    • 2012
  • The aim of this paper is to examine the hydraulically optimized camber of a blade. Prior studies have tried to determine the sound method of design on small-hydro turbines. These have appeared to realize a reasonably efficient small-hydro turbine. Nonetheless, specific and accurate design data have not as yet been established for the shape of the runner blade. Hence, this study examines the performance characteristic of an axial propeller turbine with 0~8% camber variations. The results of output power, efficiency, and pressure distribution of the turbine are graphically depicted. The definition of camber refers to the NACA airfoil. The commercial finite element analysis (FEA) packages, ANSYS, and CFX are used in this study. The results revealed the performance characteristics on small-hydro turbine and suggested a highly efficient section shape of the runner.

터널식 소수력 발전소의 최적 설계유량에 관한 연구 (A Study on the Optimum Design Flowrate for Tunnel-Type Small Hydro-Power Plants)

  • 이철형;박완순
    • 물과 미래
    • /
    • 제24권1호
    • /
    • pp.63-71
    • /
    • 1991
  • 본 연구는 터널식 소수력 발전소의 타당성 검토 기법에 관한 것으로 개발 후보지의 유량지속곡선을 작성하기 위해서 Weibull분포의 누적밀도함수와 Thiessen법을 채택하였고, 터널식 소수력 발전소의 성능예측 모델과 건설비 산정 모델이 개발되었다. 또한 한강 수계에 산재한 8개소의 개발후보지를 선정, 실측하여 이들을 대상으로 성능 특성 및 경제적 타당성을 분석하였다. 분석 결과, 터널식 소수력 발전소의 경우 발전단가를 가장 낮게 하여 주는 최적 설계유량은 유량지속곡선상의 시간비가 20%에서 30%사이에 해당하는 유량이라는 것이 밝혀졌다. 또한 개발 후보지의 설계유량, 유효낙차, 설비용량, 년평균 가동율, 년간 전기 생산량 등과 같은 초기설계제원이 산정되었다.

  • PDF

마이크로그리드와 소수력 에너지의 융합을 통한 에너지 효율화 기법 (A Scheme on Energy Efficiency Through the Convergence of Micro-grid and Small Hydro Energy)

  • 강보선;이근호
    • 한국융합학회논문지
    • /
    • 제6권1호
    • /
    • pp.29-34
    • /
    • 2015
  • 점차 스마트그리드 기술이 발전됨에 따라서 에너지의 효율성에 이목이 집중되고 있다. 그래서 스마트그리드를 구성하고 있는 마이크로그리드 내의 에너지를 독립적으로 관리하기 위해서는 신재생에너지에 대한 연구를 필요로 한다. 그중에서도 소수력 에너지는 마이크로그리드내의 사용자가 사용하는 물의 양에 따라서 그 어디에도 설치 할 수 있는 장점을 가지고 있다. 사용자들이 주거하는 아파트, 공동주택에서 사용하고 있는 하수량을 기반으로 전기 발전량과 발전기의 가동률을 측정하여 측정값이 소수력 발전에 적합한지 알아본다. 적합한 아파트, 공동주택에서는 위치에너지를 활용하여 발생한 하수를 소수력 발전기로 전기를 생산 한다. 마이크로그리드의 에너지 관리 시스템과 전기 저장 장치를 도입하여 보다 효율적인 관리를 제안하고자 한다.

블레이드 타공에 따른 수차의 유동해석 (CFD Analysis on the Hydro Turbine by the Existence of Blade Holes)

  • 박유신;김기중
    • 한국산학기술학회논문지
    • /
    • 제18권10호
    • /
    • pp.675-680
    • /
    • 2017
  • 국내 대다수의 하수처리장 방류수로는 2.0 m 미만의 낙차를 형성하고 있고 유량이 지속적이며 변동이 크지 않다는 점을 고려할 때, 저낙차 조건에서도 안정적인 전력 생산과 효율을 유지할 수 있는 소수력 발전장치 개발이 시급히 요구된다. 본 연구에서는 저유속 조건에서 소수력 에너지 생산 효율 증진을 위한 항력식 수직축 수차를 개발하기 위하여 전산 유체 동역학(CFD) 기법을 이용하여 수치해석을 수행하였다. 즉, 2.0 m/s 미만의 유속 조건에서 수차 블레이드의 타공 유무에 따른 블레이드 압력변화와 내부유동을 분석하였다. 수치해석 결과, 수차 블레이드의 타공 유무에 따른 압력분포는 타공이 있는 수차 블레이드에 발생하는 압력이 타공이 없는 수차 블레이드보다 약 5.1 % 감소되는 것으로 나타났다. 수조와 수차 블레이드 주변의 내부유동을 분석한 결과, 벡터의 분포로부터 유동속도가 변화하는 것을 알 수 있었으며, 타공이 있는 수차 블레이드의 유속이 타공이 없는 수차 블레이드의 유속보다 5.6 % 감소하는 것으로 밝혀졌다. 따라서 수차 블레이드에 타공을 형성하는 것이 구조안전성 측면에서 도움이 될 것으로 판단된다.

수도관로 소수력발전 운영효율 향상을 위한 최적제어 방안 (The Optimum Control Study for Improving Efficiency of the Small Hydropower Generation in Water Pipe)

  • 홍정조;임동희;김수상
    • 신재생에너지
    • /
    • 제4권2호
    • /
    • pp.31-38
    • /
    • 2008
  • Using a surplus head in presented water supply pipes, we have studied to improve the operating efficiency of small hydro generator, which was chosen for a test model with 00 hydro power plant. With regard to power control and countermeasure of water hammer impact, Finally we have represented the optimal control method through the synthetical analysis of existing system symptoms, operation efficiency, the effect of water hammer impact and system configuration.

  • PDF

Effect of Blade Angle on the Performance of a Cross-Flow Hydro Turbine

  • Choi, Young-Do;Lim, Jae-Ik;Kim, You-Taek;Lee, Young-Ho
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권3호
    • /
    • pp.413-420
    • /
    • 2008
  • In order to improve the performance of cross-flow hydro turbine, detailed examination of the effect of the turbine configuration on the performance is needed necessarily. Therefore, this study is aimed to investigate the effect of blade angle on the performance of the cross-flow hydro turbine. Analysis of the turbine performance with the variation of the blade angle has been made by using a commercial CFD code. The results show that inlet and outlet angles of runner blade give considerable effect on the performance of the turbine. Pressure on the surface of the runner blade changes remarkably by the blade angle both at the Stages 1 and 2. Moreover, relatively small blade inlet angle is effective to produce higher value of output power. Recirculating flow in the runner passage causes remarkable hydraulic loss.

프란시스수차의 국산화개발 연구 (R&D of Francis Type Hydro Turbine for Domestic Production)

  • 이철형;박완순
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
    • /
    • pp.302-305
    • /
    • 2009
  • The Francis type hydro turbine with vertical axis has been designed and analized for hydraulic performance verification. The guide vane angle of turbine casing were designed to be varied according to the condition of head and flowrate. When the changes in flowrate and output were comparatively large, the efficiency drop were small, so the efficiency characteristics and stability of the entire operating condition were maintained in good condition. These results showed that the developed hydro turbine in this study will be suitable for small hydro power stations with medium and high head such as agricultural reservoirs and large dam.

  • PDF