• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.136-143
• /
• 2013

The analysis of the written verdicts in recent five years was conducted to obtain preventive measures of collision between fishing vessel and non fishing vessel. As a result, a collision much happened in offshore trap for fishing vessel and below 5,000 tons of small and medium class for non fishing vessel. A person involved in a marine accident occupied 68% in sixth class deck officer and small boat operator for fishing vessel and 29% in third class deck officer for non fishing vessel. 90% of the collision happened in a underway by operating state and 84% in sight of one another by visibility state. The systemic radar training was required since 47% of the collisions was occurred on the condition of radar operation in fishing vessel. The main cause of poor lookout was a intensive fishing and poor lookout on movement by radar for fishing vessel and one man watch system and no recognition of one another by radar for non fishing vessel. This result is expected to contribute for the decrease of collision.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.1
• /
• pp.34-43
• /
• 2012

In order to establish order in fishing industry by cracking down on illegal fishing vessels effectively, it is an essential requirement to identify marking such as the name of fishing vessel and a port of register more easily. Accordingly, it is quite natural that markings on fishing vessels should be marked clearly in an appropriate size on an appropriate site in order for them to be distinguished on the air such as from planes as well as on the sea. Actually, when examining marks such as the name of a vessel which are operating in the country, marks of most fishing vessels are too small as they cannot be distinguished with the naked eye even very closely. There is no coastal fishing vessel which marks the name of fishing vessel on the upper part in order to distinguish it from planes. Fishing vessel law generally which regulates the basic laws about shipbuilding regulates marks on fishing vessel, and fisheries law only regulates sign boards of fishing vessels. Problems and improvement of the marking system on fishing vessels suggested by this paper are as follows. First, in order to contribute to establish order in fishing industry, it would be desirable to tighten standards in fisheries law besides the fishing vessel law. Second, it is difficult to distinguish marks such as the name of a vessel as relevant laws allow fishers to make such marks too small. It is necessary to set the standard for marks larger than those regulated by the international treaty. Third, the relevant laws do not regulate a letter form of marks. Therefore, it becomes a factor to make small marks hard to be distinguished more. It is necessary to decide a clear letter form. Fourth, there is insufficient detailed international standards about the marking system. It is necessary to regulate a detailed standard.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.421-427
• /
• 2015

This study aims at reviewing first the cases of marine accidents of small fishing vessels and vessels towing and being towed and, the problems concerning such lights and shapes that could be misunderstood for those in concerned Rules, or that could impair their distinctive characteristics or obstruct to keep a proper look-out. And then I wish to make a suggestion of the necessity of amending the National Laws which stipulate the rules for the ship's lights and shapes as follows; Firstly, by amending the "Standard of Construction and Equipment for the Less Than 10 Gross Tonnage of Small Fishing Vessels" small fishing vessel must be equipped with the lights and shapes that are the same as those of "vessel engaged in fishing" prescribed by Rule 26 of the "COLREG 1972" and Rule 84 of the "Maritime Safety Law Act". Secondly, "Standard of Fishing Vessels Equipment" which stipulate the rules concerning the exception of the running lights and radar reflector for the small fishing vessels must be amended to meet the requirement of Rule 20 of the "Maritime Safety Act". Thirdly, the definition of "Length of the tow" which prescribed by Rule 2 of the "Maritime Safety Act" must be amended to meet the Rule 24 of the "COLREG 1972". And also I wish to adhere to the importance of displaying the adequate vessel lights and shapes by every mariner for preventing marine accidents.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1308-1318
• /
• 2016

In order to prevent the maritime accident, all seafarers who work on fishing vessels over G/T 20 tons are required to undergo the basic safety training by the Seafarer's Act. 45% of domestic crews have boarded on the fishing vessels. However, the fishermen have been trained in accordance with the STCW(International convention on standards of training certification and watch-keeping for seafarers) Convention. But safety training courses for seaman do not reflect on the safety equipment and the limitation of the fishing vessel in the training contents which is organized in accordance with the merchant ship by STCW convention and code. Most of the fishing vessels are small fishing boat of less than G/T 80 tons. Small fishing vessels are operating with only a minimum of safety equipment that has been defined by the fishing vessel safety equipment standard. Due to the safety training that does not fit the situation of the fishing boat, the level of satisfaction by the crews onboard is low for the training. Furthermore, there is a difficulty in achieving the goal of safety education. In order to carry out the safety training that is suitable for fishermen, it is required to provide appropriate standards for the safety education of workers of small fishing boat, by understanding the current state of the domestic fishing vessels. The purpose of this study is to define the aforementioned problems and to provide the standard for the safety education of fishermen. In order to complete the purpose, the research team has conducted a analyzation for registered domestic fishing vessel and safety equipment standard.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.199-212
• /
• 2020

A large percentage of maritime accidents in coastal seas are related to small fishing vessels. In order to investigate causes of maritime accidents, it is often necessary to carry out dynamic simulations for the estimation of trajectories and motions of vessels. Initial conditions of vessels such as main dimensions, loading conditions and hydrostatic properties are required for the accurate simulations. Small fishing vessels usually have few records of hydrostatic properties during their fishing operations. Therefore, in this study, estimation procedures for hydrostatic properties of small fishing vessels are proposed. At first, hull form characteristics of Korean small fishing vessels are investigated. Most of vessels have hard-chines and centerline skegs, they have similar hull forms. Bonjean curves of several small fishing vessels whose gross tonnages are below 10 tons are normalized with vessel breadths and depths. Representative bonjean curves are derived from normalized bonjean curves, and a representative hull plan is obtained as well. If the vessel loading conditions such as total weights and centers of gravity are given, fore and aft drafts can be calculated by using the representative bonjean curves with the constraint that weights and buoyancies are in equilibrium. Metacentric heights are also estimated by using the representative hull plan. Drafts and metacentric heights estimated by proposed iterative estimation procedures are compared with actual vessel data, estimated values are in good agreements with actual values. In addition, normalized fore and aft drafts, metacentric heights of vessels can be formulated as the linear functions of normalized total weights and centers of gravity. Empirical formulas of drafts and metacentric heights are proposed, and it is confirmed that the empirical formulas also provide reasonable results, which are similar to the results by iterative estimation procedures with representative bonjean curves and hull plan.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.75-80
• /
• 2008

A scrapped fiber-reinforced plastic(FRP) fishing vessel causes many environmental problems, because technology development for recycling FRP vessel has not been adequately addressed. FRP is a main material for constructing a small coastal fishing vessel that is an object of reduction policy. Therefore, the FRP wastes derived a scrapped fishing vessel are increasing. In this study, I investigated an effective disposal process for FRP through the analysis of the actual conditions of scrapped FRP fishing vessel. The treatment processes of scrapped FRP fishing vessel are carried out with oil-removing, dismantling, intermediated processing(crushing), and then reclaiming follows burning in the final processing in Korea. However, in Japan, several recycling methods have been developed, for example, the incineration including thermal recovery, the use of cement-reclamation, and the use of asphalt concrete aggregate, because the method of reclaiming after incinerating which is generally used in Korea produces a toxic by-product such as dioxin.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2023

The motion of small fishing vessels is significantly affected by small waves, leading to accidents, such as capsizing or sinking. This paper presents the results of two types of basin tests. The first test analyzed the characteristics of roll and pitch motions among regular waves with the same wave steepness using the drifting state of three (3G/T, 7G/T, 10G/T) small fishing vessels. The second test analyzed the motion characteristics of the 7G/T fishing vessel under different wave steepness. The first test showed that heave and roll motions are significant in the beam sea, while pitch motion is significant in the bow and stern seas. The second test shows that wave steepness has a linear relationship with roll and pitch motions in the bow and stern seas.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.147-155
• /
• 1999

In this study, the stability analysis of a fishing vessel in a seaway was done. The stability analysis is an important item in the ship design, and so the ship registers of each nation constrain the ships to be followed the stability criterion. Stability variation, exciting forces due to wave and wind, and the broaching phenomena cause the capsizing of a ship. In this study, the stability analysis to study of the capsizing of a fishing vessel was performed. The relation between the speed of the ship and the wave length, that makes the encountering frequency vanish, was obtained. It was found that the encountering frequency tend to be zero when the wave whose length and direction are similar to those of ship. In this case, the possibility of dangerous situation becomes high. The calculated restoring arm becomes small when the ship is located near the wave crest. In general, the selected small fishing vessel is better than the large ship with respect to the stability, however the wave height becomes relatively high because of her small length Kim(l994) calculated the stability variation of the large cargo ship, the results of which showed the changes in stability great. But in the selected small fishing vessel in this study, the changes was small in comparison with the larger ship. This reason seems to be the shape of her midship section. In large cargo ships, the block coefficient is large, but that of the fishing vessel is relatively small and the small fishing vessel has chine, therefore the center of buoyancy moves much when the ship is inclined. It is desirable that the dynamic stability analysis for a fishing vessel, whose speed and direction are similar to those of waves, shall be done in the near future.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.16-22
• /
• 2019

This study proposed estimation methods for weight and center of gravity of small fishing vessels. Weights loaded on small fishing vessels were divided into fixed weights such as crew, fishing gear, and variable weights such as fuel, fresh water, provision, bait, and fish. Based on statistical analyses with weight data of several small fishing vessels, weight, longitudinal center of gravity (LCG), vertical center of gravity (KG) of each item were represented as linear functions of vessel gross tonnage. In addition, weighting factors of variable weights were added on estimation formulas in accordance with vessel loading conditions, e.g. full load departure condition. Estimation methods were verified using actual small fishing vessel data.

• The Journal of Fisheries Business Administration
• /
• v.36 no.3 s.69
• /
• pp.89-117
• /
• 2005

Currently, the tax - exempted vessel fuel is provided for commercial fishing in order to increase the competitive power of fishery production thorough the National Federation of Fisheries Cooperatives. The National Federation of Fisheries Cooperatives should predict the exact amount of fuel consumption for fishing every year to request the fuel from the government. Unfortunately, there is no sophisticated model to predict the tax - exempted vessel fuel consumption. In 2003, the consumption of the tax- exempted vessel fuel was only $25.1\%$ of the estimation amount by the National Federation of Fisheries Cooperatives. This causes an inefficiency in the petroleum management. Moreover, we need some data such as the annual average fishing hours, fishing days and fishing behavior to adopt a new policy regarding fishing. Up to now, the data have been obtained by survey with response in the fishery field. In the most case, we have a small number of data because we spend so much time and money consuming for collecting fishing data. As a result, the level of confidence of the data is associated with the sample size and normally low. In order to achieve more accurate data, we need to develope an efficient method for collecting fishing data. In this research, we proposed a new method to predict the tax- exempted vessel fuel consumption more exactly. The prediction results from the proposed method has been compared with the results from the current method. According to the results in this research, the method proposed here produced much better accuracy than the current method. In addition, we also proposed in the paper for collecting fishing data of the annual average fishing hours using the tax - exempted vessel fuel consumption and the gasoline consumption of vessel engine. The fishing data obtained by using the method proposed in this research could be much more efficient and accurate because it doesn't need to estimate from survey sample data.