• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.172-178
• /
• 2021

In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.243-248
• /
• 2022

As the scope of use of portable and wearable electronic devices is expanding, the limitations of heavy and bulky solid-state batteries are being revealed. Given that, it is urgent to develop a small energy harvesting device that can partially share the role of a battery and the utilization of energy sources that are thrown away in daily life is becoming more important. Contact electrification, which generates electricity based on the coupling of the triboelectric effect and electrical induction when the two material surfaces are in contact and separated, can effectively harvest the physical and mechanical energy sources existing in the surrounding environment without going through a complicated intermediate process. Recently, the interest in the harvest and utilization of wind energy is growing since the wind is an infinitely ecofriendly energy source among the various environmental energy sources that exist in human surroundings. In this study, the optimization of the energy harvesting device for the effective harvest of wind energy based on the contact electrification was analyzed and then, the utilization strategy to maximize the utilization of the generated electricity was investigated. Natural wind based Fluttering TENG (NF-TENG) using fluttering film was developed, and design optimization was conducted. Moreover, the safe high voltage generation system was developed and a plan for application in the field requiring high voltage was proposed by highlighting the unique characteristics of TENG that generates low current and high voltage. In this respect, the result of this study demonstrates that a portable energy harvesting device based on the contact electrification shows great potential as a strategy to harvest wind energy thrown away in daily life and use it widely in fields requiring high voltage.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.226-240
• /
• 2022

Local governments over a certain size in Republic of Korea may conduct Environmental Impact Assessment (EIA) considering regional characteristics if it is necessary, in accordance with Article 42 of the 「Environmental Impact Assessment Act」. However, it was investigated that the number of local government EIA operation in many local governments was less than initial expectations. In order to improve it, the status of ordinances and consultation guidelines which are different for each local government need to be compared, and the institutional issues forthe relevant local governments must be found considering regional characteristics. Furthermore, detailed regulation and guidance on the local government EIA procedure should be included in the consultation guidelines and related information need to be provided. In this study, focusing on the case of Incheon Metropolitan City, the status of local government EIA ordinances in metropolitan cities and provinces with a similar condition was investigated, and the types and scope of target projects were compared and analyzed. In addition, consultation guidelines forIncheon Metropolitan City were written, and improvements on the procedure flow and overall schedule designation derived from the process were presented. In the case of Incheon Metropolitan City, there were no detailed information officially announced regarding the regulations of the local government EIA ordinance and follow-up management, so the administrative system of the local government needed to be reinforced in this field. Meanwhile, considering the status of local environment and geography, some target project types were deemed necessary to be added: port construction projects, water resource development projects, railroad construction projects, and military facilities installation projects. The results of this study will provide useful information to local governments which want to improve their operation effectiveness by reorganizing the local government EIA system and preparing specific guidelines.

• Journal of Space Technology and Applications
• /
• v.1 no.3
• /
• pp.283-301
• /
• 2021

In order to satisfy the intellectual curiosity of mankind to explore the unknown, National Aeronautics and Space Administration (NASA) in the United States and European Space Agency (ESA) in Europe are embarking on various R&D under the motto of the grand dream of pioneering space into a safe and sustainable environment. In the 2020s and 30s, it is expected that advanced giant observation equipment will be in operation, such as the development of a 10-meter-class telescope in space. In Korea, following the development of the 0.15 m Near-Infrared Imaging Spectrometer (NISS), Korea Astronomy and Space Science Institute (KASI) is also participating a 0.2 m Spectro-Photometer for the History of the Universe, Epoch of Reionization, and Ices Explorer (SPHEREx) as an international cooperation partner in small exploration telescope. However, domestic experience in the development and operation of the space telescopes is still insufficient, and there is no plan with long-term prospects for constructing telescopes. In order to answer questions about the unknown world that mankind has not experienced using our own equipment, planning and preparation for the construction of a space telescope through close cooperation among industry-university-institute-government is urgently needed. In this paper, the necessity, background, development goals, and expected effects of the development of the Korean Space Telescope are summarized conceptually, and a working group (WG) is also proposed. In the WG activities, Korea shall take the lead in establishing the Korean-style space telescope development plan, and will start a valuable step to establish the national direction in the field of space astronomy and related technologies. We hope that the WG will be another milestone in Korea's space development.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.220-256
• /
• 2022

The most important thing for conserving plant diversity in an area is to make an overall inventory of the plant species inhabiting the area. In particular, limestone areas are known for their high plant diversity and distribution of specific plants. Despite that, only a few have been designated as protected areas. This study investigated the vascular plants distributed in Goyangsan Mtn. and Munraesan Mtn., located in limestone areas of the central part of the Korean Peninsula. A field survey was conducted eight times from April to October 2021. As a result, we identified a total of 654 taxa comprising 113 families, 357 genera, 592 species, 15 subspecies, 44 varieties, and 3 formulas. They included four endangered wild plant species: Astilboides tabularis, Eleutherococcus senticosus, Cypripedium macranthos, and Epilobium hirsutum. Endemic plants in Korea were identified as 32 taxa. Floristic target plants were identified as 168 taxa, specifically 5 taxa of grade V, 41 taxa of grade IV, and 36 taxa of grade III. The red data plants included 2 taxa as "Endangered (EN)", 7 taxa as "Vulnerable (VU)", and 7 taxa as "Near threatened (NT)". A total of 41 taxa of naturalized plants were identified, and 4 of them were invasive alien plants. The surveyed vicinity of Goyangsan Mtn. and Munraesan Mtn. showed high plant diversity and contained core habitats for distribution of an endangered wild plant, Astilboides tabularis,in the limestone area. Moreover, both mountains contained a small population of Cotoneaster integerrimus. These findings confirm that the area has conservation values. Therefore, we propose to identify areas with high plant diversity and designate them as special protected areas.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.274-284
• /
• 2022

Through sample-size-based rarefaction analyses, we tried to suggest the appropriate degree of sample concentration and sub-sample extraction, as a way to estimate more accurate zooplankton species diversity when assessing biodiversity. When we collected zooplankton from three reservoirs with different environmental characteristics, the estimated species richness (S) and Shannon's H' values showed different changing patterns according to the amount of sub-sample extracted from the whole sample by reservoir. However, consequently, their zooplankton diversity indices were estimated the highest values when analyzed by extracting the largest amount of sub-sample. As a result of rarefaction analysis about sample coverage, in the case of deep eutrophic reservoir (Juam) with high zooplankton species and individual numbers, it was analyzed that 99.8% of the whole samples were represented by only 1 mL of sub-sample based on 100 mL of concentrated samples. On the other hand, in Soyang reservoir, which showed very small species and individual numbers, a relatively low representation at 97% when 10 mL of sub-sample was extracted from the same amount of concentrated sample. As such, the representation of sub-sample for the whole zooplankton sample varies depending on the individual density in the sample collected from the field. If the degree of concentration of samples and the amount of sub-sample extraction are adjusted according to the collected individual density, it is believed that errors that occur when comparing the number of species and diversity indices among different water bodies can be minimized.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.342-361
• /
• 2022

In order to evaluate the effect of nitrogen application levels on yield and quality of rice varieties, a field experiment was conducted at National Institute of Crop Science of Korea from 2018 to 2020. Five levels (0, 3, 5, 7, and 9 kg/10a) of nitrogen fertilizer were treated to 21 Korean rice varieties. Yield, yield component, appearance quality, and protein content in rice were analyzed. The average head rice yield for 3 years decreased by 28%, 22%, 11%, and 8%, respectively, when cultivated with 0, 3, 5, and 7 kg/10a nitrogen application compared to cultivation with a standard nitrogen application amount, 9 kg/10a. The number of panicles per hill increased as the amount of nitrogen application increased, but there was no significant change in the number of grains per panicle and 1000-grains weight, and the number of panicles per hill showed relatively small annual variation compared to other yield components. There was no significant difference in the head rice ratio according to the nitrogen application amount, the broken rice ratio slightly decreased, and the floury rice ratio increased. The protein content of rice decreased with increasing nitrogen application in 2018 and 2019, and was the lowest at 7 kg/10a of nitrogen application, and showed a tendency to increase again at 9 kg/10a. In the case of 2020, as the amount of nitrogen application increased, the protein content showed a tendency to continuously increase. In terms of varieties, 13 varieties, including Chilbo, seemed to be capable of low-nitrogen cultivation because loss of the head rice yield was less and the protein content could be lowered to 6% or less according to 7 kg/10a nitrogen application.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.43-58
• /
• 2008

This research was conducted to determine the alternative tool of chemical spray for rice cultivation using the unmanned helicopter(Yamaha, R-Max Type 2G-remote controlled system) at farmer's field in Korea. The unmanned helicopter tested was introduced form Japan. In Korea the application of chemicals by machine sprayer for pest management in rice cultivation has been ordinarily used at the farmer's level. However, it involved a relatively high cost and laborious for the small scale of cultivation per farm household. Farm population has been highly decreased to 7.5% in 2002 and the population is expected to rapidly reduce by 3.5% in 2012. In Japan, pest control depending on unmanned helicopter has been increased by leaps and bounds. This was due in part to the materialization of the low-cost production technology under agricultural policy and demand environmentally friendly farm products. The practicability of the unmanned helicopter in terms of super efficiency and effectiveness has been proven, and the farmers have understood that the unmanned helicopter is indispensable in the future farming system that they visualized. Also, the unmanned helicopter has been applied to rice, wheat, soybean, vegetables, fruit trees, pine trees for spraying chemicals and/or fertilizers in Japan Effect of disease control by unmanned helicopter was partially approved against rice blast and sheath blight. However, the result was not satisfactory due to the weather conditions and cultural practices. The spray density was also determined in this experiment at 0, 15, 30, and 60cm height from the paddy soil surface and there was 968 spots at 0cm, 1,560 spots at 15cm, 1,923 spots at 30cm, and 2,999 spots at 60cm height. However, no significant difference was found among the treatments. At the same time, there was no phytotoxicity observed under the chemical stray using this unmanned helicopter, nor the rice plant itself was damaged by the wind during the operation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.1
• /
• pp.56-71
• /
• 2023

Citizens' needs for urban green spaces are on the rise due to improved quality of life and increased interest in environments. The garden is noteworthy because it is small in size, making it less controversial to create in the city, and it is adjacent to the residential area, improving citizens' daily environment. Moreover, recently gardens is attracting attention as a tool for urban regeneration, such as being created in declining areas as part of a government project. Therefore, it is time to study the role and value of urban gardens in deteriorated areas in terms of space welfare. However, there are few studies that quantitatively evaluate the effects of gardens, and many prior studies are limited to focusing the green space larger than a certain size (e.g., parks and forests). Therefore, the aim of this study is to examine the effect of garden and gardening quantitatively, paying attention to social aspects such as life satisfaction and community of inhabitants. The study was conducted in an old row housing complex in Gojan1-dong, Ansan-si, Gyeonggi-do. In there, some of the dwellers voluntarily created outdoor gardens and engaged in gardening for a long time. In addition, after the 2017 Gyeonggi-do Garden Fair, several gardens have been maintained and used by residents there. For the first step, the field trip was done to research the status of the garden in the area, and then, a survey was conducted on whether or not gardening has an impact on the life satisfaction and community of residents. The results were analyzed by t-test and ANOVA. As a result, residents who are engaged in gardening are more active in the "neighborhood exchange" and "resident participation" than those who are not engaged in gardening. In addition, if residents voluntarily create a garden, the level of "satisfaction of life" is higher than those staying in the garden which is constructed by the government. And a resident who is gardening in the complex shows higher life satisfaction than those who garden outside of the complex. These results confirmed that the garden has positive effects promoting "exchanges with neighbors", "participation in the community", and "life satisfaction" of residents. It shows that it is important to ensure the right of residents to participate in the garden-making process as much as possible, and the garden's location should be paid attention to maximize the positive effect of gardens.

• Journal of Intelligence and Information Systems
• /
• v.28 no.1
• /
• pp.263-286
• /
• 2022

This study acquires NBA statistical information for a total of 32 years from 1990 to 2022 using web crawling, observes variables of interest through exploratory data analysis, and generates related derived variables. Unused variables were removed through a purification process on the input data, and correlation analysis, t-test, and ANOVA were performed on the remaining variables. For the variable of interest, the difference in the mean between the groups that advanced to the playoffs and did not advance to the playoffs was tested, and then to compensate for this, the average difference between the three groups (higher/middle/lower) based on ranking was reconfirmed. Of the input data, only this year's season data was used as a test set, and 5-fold cross-validation was performed by dividing the training set and the validation set for model training. The overfitting problem was solved by comparing the cross-validation result and the final analysis result using the test set to confirm that there was no difference in the performance matrix. Because the quality level of the raw data is high and the statistical assumptions are satisfied, most of the models showed good results despite the small data set. This study not only predicts NBA game results or classifies whether or not to advance to the playoffs using machine learning, but also examines whether the variables of interest are included in the major variables with high importance by understanding the importance of input attribute. Through the visualization of SHAP value, it was possible to overcome the limitation that could not be interpreted only with the result of feature importance, and to compensate for the lack of consistency in the importance calculation in the process of entering/removing variables. It was found that a number of variables related to three points and errors classified as subjects of interest in this study were included in the major variables affecting advancing to the playoffs in the NBA. Although this study is similar in that it includes topics such as match results, playoffs, and championship predictions, which have been dealt with in the existing sports data analysis field, and comparatively analyzed several machine learning models for analysis, there is a difference in that the interest features are set in advance and statistically verified, so that it is compared with the machine learning analysis result. Also, it was differentiated from existing studies by presenting explanatory visualization results using SHAP, one of the XAI models.